Question about Kitchen Appliances - Others

3 Answers

Broken Katana 5'' santoku knife with stainless steel handle

I bought a beautiful Cuisinart knife set, stainless steel handles, 9 knives, 8 steak knives, knife sharpener and utility sissors. Some body used the 5'' santoku knife and broke the blade. Where I can find a replacement knife.........it must have a stainless steel handle to match the set. Please help

Posted by on

  • 1 more comment 
  • michelemarch Jan 01, 2009

    I went on www.cuisinart.com to start with, and can't find how to get the knife that I am looking for, so that is why I am paying for your service. I bought a beautiful Cuisinart knife set, stainless steel handles, 9 knives, 8 steak knives, knife sharpener and utility sissors. Some body used the 5'' santoku knife and broke the blade. Where I can find a replacement knife.........it must have a stainless steel handle to match the set. Please help

  • michelemarch Jan 01, 2009

    Still need the knife, must be able to get it somewhere??? Come on guys, you're the experts

  • michelemarch Jan 05, 2009

    I am awaiting to see if Calphon can assist, will let you know, as soon as I can contact them. No body working there on the weekend

×

3 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 837 Answers
  • Jay Glendenning
    Jay Glendenning Jan 01, 2009

    Give me the FixYa when done .. Thanks, Crayz

  • Jay Glendenning
    Jay Glendenning Jan 05, 2009

    Has calphalon been able to help you?

×

  • Level 1:

    An expert who has achieved level 1.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Genius:

    An expert who has answered 1,000 questions.

  • Contributor
  • 1,199 Answers

Go to www.Cuisinart,com customer service! they should be able to help you!
Happy new year!

Posted on Jan 01, 2009

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Novelist:

    An expert who has written 50 answers of more than 400 characters.

    Governor:

    An expert whose answer got voted for 20 times.

  • Expert
  • 163 Answers

K...
do you want to purchase it from net?

Posted on Jan 01, 2009

  • ronny2051 Jan 01, 2009

    sorry to say but there is no such knife blade on internet.
    Note: its a complete set to purchase.

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Where can I find this knife?


These older models are hard to find when you need them. The only place I've found them was on Ebay, and I see there is one currently for sale (new in box). Here is a link if you decide to go that route.

Toastmaster 6104 Electric Power Carving Knife Comfort Grip Handle NEW

Oct 28, 2014 | Nil Toastmaster 6104 Electric Carving...

1 Answer

Where do I find the electric carving knife by toastmaster have used for a long time and now can't find anywhere


I've never heard of the "Nil" part, but the best place to find these older model appliances is on Ebay. I typically hate buying on Ebay, but these older model electric knives are no longer made and hard to come by elsewhere.
I found one where the seller has very good feedback ratings, and the price is about $24 total shipped. Here is a link below, if you decide to go that route. Hope this helps.

Toastmaster 6104 Electric Power Carving Knife Comfort Grip Handle NEW

Oct 28, 2014 | Nil Toastmaster 6104 Electric Carving...

1 Answer

I have faberware stainless steel knife set knives have rust spots. What & why??


How do remove rust spots from stainless steel Yahoo Answers

Yes, stainless will rust. The above link has helpful information on how to treat rust spots on stainless. The web site suggests using a mild acid, such as oxalic acid, which can be purchased at Home Depot or Lowes. Use a green scrub pad, as recommended. Hope this helps....

Apr 28, 2014 | Refrigerators

1 Answer

Knife handles broken with age


If you have a Leatherman multifunction tool. They will repair it and all you pay is the shipping.

Mar 14, 2013 | Camping, Backpacking & Hiking

1 Answer

How many different knife handlers there are?


The most common kinds of handles are rubber and wood handlers, but there are also plastic handlers, leather handlers, aluminum handlers, and stainless steel handlers. If you plan on buying a new knife I suggest you to pick the wood handle, it's the most comfortable to use and also sustain longer.

Jul 25, 2012 | Camping, Backpacking & Hiking

1 Answer

How do I change the two blades


Operator's manual for 22-547 portable planer is here.

Page 10 and 11 discusses the process of changing the knives in detail. I'd like to reiterate the manual's comment about how sharp these knives are. Use gloves or be VERY careful.

Per manual:

1. DISCONNECT THE TOOL FROM THE POWER SOURCE.

2. Lower the head assembly by turning handle (B) Fig. 15.

3 Remove chip deflector (A) Fig. 19.

4. Carefully place knife setting gage (B) Fig. 20, on the cutterhead so the rounded sections are directly over the knife as shown.

5. Loosen the knife locking bar by turning the seven knife locking screws, six of which are shown at (C) Fig. 21, CLOCKWISE and carefully remove knife locking bar (D) Fig. 22, knife (E), and springs (not shown) which are located under the knife.

6. Remove the remaining knife in the same manner.

7. Thoroughly clean the knife slots, knife locking bars and screws. Check the screws. If the threads appear worn or stripped or if the heads are damaged, replace them.

8. Carefully replace the springs (not shown), knives (E) Fig. 22, and knife locking bars (D), into both slots of cutterhead (F). IMPORTANT: WHEN REPLACING KNIFE LOCKING BARS (D) AGAINST KNIVES (E), AS SHOWN IN THE CROSS-SECTIONAL ILLUSTRATION Fig. 22, MAKE CERTAIN THE BARS ARE INSTALLED AS SHOWN, WITH
SCREWS (C), POSITIONED AT THE TOP OF KNIFE LOCKING BARS (D), AND ANGLED DOWNWARD HOLDING THE KNIVES (E) PROPERLY INSIDE THE CUTTERHEAD SLOTS. TURN KNIFE LOCKING SCREWS, ONE OF WHICH IS SHOWN AT (C), COUNTERCLOCKWISE JUST ENOUGH TO HOLD BOTH KNIVES (E) IN THE CUTTERHEAD (F).

9. Adjust both knives (see manual).

Jan 17, 2010 | Delta 22 - 547 12" Steel Knife Set for 22...

1 Answer

It seems to be cutting unevenly from left to right?


Operator's manual for the 22-547 is here.

It sounds like you may need to adjust the knives. Page 10 and 11 of the operator's manual discuss the details. See below: (I have removede references to the figure and diagrams in the manual - look there for pictures).

ADJUSTING KNIVES

To check and adjust the knives, proceed as follows:
1. DISCONNECT THE TOOL FROM THE POWER SOURCE.

2. Lower the head assembly by turning handle

3. Remove chip deflector

4. Carefully place knife setting gage, on the cutterhead so the rounded sections are directly over the knife as shown. When adjusted correctly, the knife should just contact the bottom of the center portion at each end of gage. Check the other knife in the same manner.

5. If an adjustment to one or both knives is necessary, slightly loosen the seven locking screws, by turning the screws CLOCKWISE into the knife locking bar just enough to relieve stress in the cutterhead and not disturb the knife setting.

6. With setting gage, in place, apply pressure to the knife being reset. Turn the seven knife locking screws, CLOCKWISE until the knife locking bar becomes loose. Lift springs will automatically raise the knife until it comes in contact with gage. Snug the knife locking bar by lightly turning the seven locking screws, COUNTERCLOCKWISE.

IMPORTANT: AT THIS TIME, ONLY TIGHTEN THE KNIFE LOCKING BAR JUST ENOUGH TO HOLD THE KNIFE IN POSITON INSIDE THE CUTTERHEAD SLOT.

7. If the other knife needs adjustment, repeat STEP 6.

8. After both knives are positioned in the cutterhead, turn each of the seven screws, COUNTERCLOCKWISE until the knife is secure in the cutterhead. NOTE: When tightening knife locking screws, tighten the end screws first, then inward toward the center of the cutterhead.

9. Replace chip deflector.

Jan 12, 2010 | Delta 22 - 547 12" Steel Knife Set for 22...

1 Answer

Kithchenaid Microwave


You'll notice there are small clips holding the stainless outer door to the black metal inner door. Get a bunch of putty knives (butter knives work too) and work a knife into about every other clip. I did it on the bottom. Once you're sure all the bottom clips are free, and you've removed the three screws on the side of the door, you'll be able to gently pull the stainless outer door away from the black inner door and get to the handle screws.

I bent both doors in this process, and tore the black plastic liner into a few pieces while I was getting everything out, so I had to buy a new door ($200). Be careful.

Sep 09, 2008 | KitchenAid KHMS155LSS 1000 Watts Microwave...

Not finding what you are looking for?
Kitchen Appliances - Others Logo

Related Topics:

102 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kitchen Appliances - Others Experts

Angel Joseph Jr.
Angel Joseph Jr.

Level 2 Expert

683 Answers

kakima

Level 3 Expert

102366 Answers

yadayada
yadayada

Level 3 Expert

70346 Answers

Are you a Kitchen Appliances - Other Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...