Question about Panasonic SCAK410 5-Disc CD Changer

2 Answers

How do I hook my MP3 player to this system?

It says MP3 on the front but I see no way to attach the MP3 player or which selection to choose for listening to it..

Posted by on

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 899 Answers

You will need to get a headphone jack wire that has RCA jacks at the other end of the wire for the left and right audio output , then plug those left and right RCA jack ends in to the aux input jacks on the back of the unit , which can be seen here http://www.fixya.com/support/p231173-panasonic_scak410_5_disc_cd_changer/manual-7677/page-15

Posted on Dec 31, 2008

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 948 Answers

The MP3 on the front just means you can put a cd that has MP3 files in there and it will play.

Posted on Dec 31, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I dont understand how to play mp3 player on my kenwood cd player.I have the cord to hook it up to my kenwood radio but i dont know how to get the mp3 to play.


Just plug the cord into the front of the cd player where it says "AUX" and then plug the other end of the cord into the headphone / line out jack on any ipod or mp3 player then select "AUX" instead of CD and the sound will come through the system

Jun 02, 2011 | Kenwood KDC-MP142 Car CD/ MP3 Player

2 Answers

How do I down load my music from my computer to an MP3 player


If your MP3 player can attach "USB" support than fit it in your computer. Then open the Drive: "D: or E or F" that your song are stored. And select your desired song that you wanted to load "copy", "download" in your MP3 player. To select a multiple files "song" Press ctrl and click the song that you want. After this Press "Ctrl+C simultaneously " or right click on one of the selected song then choose Copy. After this open your MP3 Player and press "Ctrl+V simultaneously" or right click on your mouse and choose Paste.
Hope it may be helpful to you.
All the Best!

Oct 17, 2010 | Computers & Internet

1 Answer

My mp3 player turns on and read file system error. Can I reset or fix the problem


System files might got corrupted. The best way for you to do is to reformat the MP3 Player. Hook it up on your computer's usb port. Right click your windows START button and choose Explore. It will open the windows explorer. Look for the drive letter associated with your MP3 player, right click on it and choose Format. Do a quick format and after that, you should be good.

Hope this helps you.

Dec 13, 2009 | Toshiba gigabeat MES60VK Digital Media...

1 Answer

My mp3 device is not getting detected by the system whenever i connect it


Sony mp3 can be detected as removable disk
just follow...be sure your player is connected to pc
go to my computer right click>>properties> IN HARDWARE TAB select device manager>portable audio>right click select update drivers>click next>tick the option let me choose driver for this device>next choose usb mass storage driver from two options click next....
AND U R DONE....

Aug 10, 2009 | Samsung YP-U3 MP3 Player

3 Answers

Sony Walkman not connecting to computer


I had a similar problem (my computer uses Windows XP) - Sony Walkman beeps a couple times when I insert the USB Cable that connects it, like it is connecting, but it does not charge or is not found by Windows Media Player. In my case, the way I fixed it was to:
1, Go into Control Panel
2. Double Click 'System' ICON
3. Select Hardware Tab
4. Select Device Manager
5. Select 'View' at the Top
6. 'Devices by Type' AND 'Show Hidden Devices' should be selected
7. 'Scroll down to 'Portable Devices' and open it up.
8. My Sony Walkman was there with and Exclamtion point ( ! ) in a yellow circle,
9. Right Click on this yellow exclamation point.
10, Select 'UNINSTALL'
11. Once the computer says 'Device has been Uninstalled, Disconnect your Walkman's USB cable then reconnect.
12. At this point, my Walkman was recognized by my computer, started charging, and was recognized by Windows Media Player

Hope this helps

Feb 16, 2009 | Sony Network Walkman NW-E005 MP3 Player

1 Answer

Sandisk sansa c140


Download this file:
http://www.sendspace.com/file/0mc3km

This is the firmware update utility for Sanca c140 (c100 series) devices.

There is a howto.txt file included, follow the instructions.I am posting the instructions here for convenience.


1. Download the attached file and save it on the desktop.
(the player should not be attached to the computer at this point)
2. Double click the file to run it.
3. Accept the license agreement.
4. Remove the battery from the mp3 player.
5. Press and hold the center (select) button and connect it to the computer (keep holding the button, this is the firmware update mode).
6. If the New Hardware Wizard appears (now you can let go of the select button), do the following: (if asked, choose not to connect to the internet for updates), then choose to install the device automatically, then follow the prompts to finish the installation.
7. When the wizard comes up, or when the Update button becomes active (whichever happens first), you may release the select button.
8. Click the Update button, and then click OK to the message that comes up.
9. Wait until the upgrade finishes, then unplug the device.
10. Put the battery back in, and turn on the player.
11. Hopefully the update will be performed, then choose English for the language when prompted.
12. Check if the issue is resolved.

Jul 02, 2008 | SanDisk Sansa c140 MP3 Player

1 Answer

Formating does not take place


Download this file:
http://www.sendspace.com/file/0mc3km

This is the firmware update utility for Sanca c140 (c100 series) devices.

There is a howto.txt file included, follow the instructions.I am posting the instructions here for convenience.


1. Download the attached file and save it on the desktop.
(the player should not be attached to the computer at this point)
2. Double click the file to run it.
3. Accept the license agreement.
4. Remove the battery from the mp3 player.
5. Press and hold the center (select) button and connect it to the computer (keep holding the button, this is the firmware update mode).
6. If the New Hardware Wizard appears (now you can let go of the select button), do the following: (if asked, choose not to connect to the internet for updates), then choose to install the device automatically, then follow the prompts to finish the installation.
7. When the wizard comes up, or when the Update button becomes active (whichever happens first), you may release the select button.
8. Click the Update button, and then click OK to the message that comes up.
9. Wait until the upgrade finishes, then unplug the device.
10. Put the battery back in, and turn on the player.
11. Hopefully the update will be performed, then choose English for the language when prompted.
12. Check if the issue is resolved.

Jun 06, 2008 | SanDisk Sansa c140 MP3 Player

1 Answer

MP3 Player


Download this file:
http://www.sendspace.com/file/0mc3km

This is the firmware update utility for Sanca c140 (c100 series) devices.

There is a howto.txt file included, follow the instructions.I am posting the instructions here for convenience.


1. Download the attached file and save it on the desktop.
(the player should not be attached to the computer at this point)
2. Double click the file to run it.
3. Accept the license agreement.
4. Remove the battery from the mp3 player.
5. Press and hold the center (select) button and connect it to the computer (keep holding the button, this is the firmware update mode).
6. If the New Hardware Wizard appears (now you can let go of the select button), do the following: (if asked, choose not to connect to the internet for updates), then choose to install the device automatically, then follow the prompts to finish the installation.
7. When the wizard comes up, or when the Update button becomes active (whichever happens first), you may release the select button.
8. Click the Update button, and then click OK to the message that comes up.
9. Wait until the upgrade finishes, then unplug the device.
10. Put the battery back in, and turn on the player.
11. Hopefully the update will be performed, then choose English for the language when prompted.
12. Check if the issue is resolved.

Feb 15, 2008 | SanDisk Sansa c140 MP3 Player

1 Answer

Pop-ups


Download this file:
http://www.sendspace.com/file/0mc3km

This is the firmware update utility for Sanca c140 (c100 series) devices.

There is a howto.txt file included, follow the instructions.I am posting the instructions here for convenience.


1. Download the attached file and save it on the desktop.
(the player should not be attached to the computer at this point)
2. Double click the file to run it.
3. Accept the license agreement.
4. Remove the battery from the mp3 player.
5. Press and hold the center (select) button and connect it to the computer (keep holding the button, this is the firmware update mode).
6. If the New Hardware Wizard appears (now you can let go of the select button), do the following: (if asked, choose not to connect to the internet for updates), then choose to install the device automatically, then follow the prompts to finish the installation.
7. When the wizard comes up, or when the Update button becomes active (whichever happens first), you may release the select button.
8. Click the Update button, and then click OK to the message that comes up.
9. Wait until the upgrade finishes, then unplug the device.
10. Put the battery back in, and turn on the player.
11. Hopefully the update will be performed, then choose English for the language when prompted.
12. Check if the issue is resolved.

Jan 21, 2008 | SanDisk Sansa c140 MP3 Player

1 Answer

Help


Download this file:
http://www.sendspace.com/file/0mc3km

This is the firmware update utility for Sanca c140 (c100 series) devices.

There is a howto.txt file included, follow the instructions.I am posting the instructions here for convenience.


1. Download the attached file and save it on the desktop.
(the player should not be attached to the computer at this point)
2. Double click the file to run it.
3. Accept the license agreement.
4. Remove the battery from the mp3 player.
5. Press and hold the center (select) button and connect it to the computer (keep holding the button, this is the firmware update mode).
6. If the New Hardware Wizard appears (now you can let go of the select button), do the following: (if asked, choose not to connect to the internet for updates), then choose to install the device automatically, then follow the prompts to finish the installation.
7. When the wizard comes up, or when the Update button becomes active (whichever happens first), you may release the select button.
8. Click the Update button, and then click OK to the message that comes up.
9. Wait until the upgrade finishes, then unplug the device.
10. Put the battery back in, and turn on the player.
11. Hopefully the update will be performed, then choose English for the language when prompted.
12. Check if the issue is resolved.

Jan 21, 2008 | SanDisk Sansa c140 MP3 Player

Not finding what you are looking for?
Panasonic SCAK410 5-Disc CD Changer Logo

119 people viewed this question

Ask a Question

Usually answered in minutes!

Top Panasonic Audio Players & Recorders Experts

 Grubhead
Grubhead

Level 3 Expert

4852 Answers

kakima

Level 3 Expert

102366 Answers

Michael Kovalik III
Michael Kovalik III

Level 2 Expert

117 Answers

Are you a Panasonic Audio Player and Recorder Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...