Question about Samsung L100 Digital Camera

1 Answer

Need to know why my status lamp keeps coming on it wont let me take pic or see the pic

Posted by on

  • miss_fundee Jan 01, 2009

    I bought the same camera for my mum at christmas last week. She took photos all up to today (new year) and now the status bulb keeps flashing and it wnt let me switch it off and the lens wont go back in!! i dont know what the problem is iv tried everything and cant find a solution! so its going back to the shop tomorow haha

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 33 Answers

Flash bulb could be bad or the reader could be bad. You could send it in to mackcam.com for an estimate

Posted on Dec 31, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a wd52628


This area of the TV is a cause of some expense in rear projection.
The fan controls the temperature of the lamp. An obstruction keeps the fan from coming up to speed.
The power block controls the power the lamp uses. This helps keep the glass of the lamp from breaking breaking.
An arc is a badly mounted lamp or a lamp defect.
Dust build up can cause overheating.
Most of this area cannot be serviced by a non-technician.

Apr 24, 2010 | Mitsubishi WD-52525 52" Rear Projection...

2 Answers

Buzzing sound w/no pic or sound, lamp light comes on


Replaced the lamp.Buzzing sound,power supply have problem with some transformers in it.After replaced the lamp pic should come back.Power supply reqiure replacing don't know yet.

Feb 11, 2010 | Sony KDF-E42A10 42 in. LCD Television

1 Answer

TV turns off while watching it then turns back on after abt 1 min


TV needs new lamp as symptom shows existing lamp is weak and causing repeatedly on-off
Please replace lamp in TV, replacement procedure is written in user manual and it is not difficult.
Always buy Sony original lamp for TV safety.
Let me know if you need further help.
Thanks.

Sep 22, 2009 | Sony Televison & Video

2 Answers

Mitsubishi WD-62525 yellow blinking status light


Check that the lamp door is closed all the way. There is a saftey switch that closes from the door being on all the way. If not the status light will keep blinking. There is also a switch on the air filter door.

Jul 13, 2009 | Mitsubishi WD-62525 62" Rear Projection...

1 Answer

Hitachi 50 in 50vs69a


blue screen on mine too.had the serve guy come out and he told me it was" the engine".
also the clock won't remember time after i turn it off,or the input names i gave.he said it was a circuit board problem that keeps resetting itself.
fortunately for me he said i would get a new one from the extended warranty.
just so you know the pic in pic doesnt work either because the second picyure has to be digital.my old tv ,s pic in pic works fine.new technology isn,t always the best.i hope i get an in store credit so i can buy another brand.remember 1080p is better!

Sep 15, 2008 | Hitachi 50VS69 50" Projection HDTV

1 Answer

Mitsubishi WD-62525 Red Status Light After Cap Replacement


maybe this help you, let me know. good luck

ok here new tips on v26 chaiss cust install new oem lamp with led lamp just blink only many time install new balister still shut down no audio no hv at all come with code 34 for test turn out to be that in power supply ther caps that wher blow up 3300 mf at 16v two them c9a38 ad c9a36 both same also note c9a62 1000mf at 16v thru c9a52 ad c9a82 ad c9a61 all 1000mf at 16v install 63v at 1000mf all same with both 3300mf at 25v fix the set now turn on with great pix cust old lamp too dark for pic install new lamp pic better ad reset lamp timer all good cust happy that cust got from mist the power supply board from looking from back of the set on left hand side all way in front u hav pull whole dmb bd to get to it want lets yu guys know[john leyva american video service center ] the right model number is this WD52525 HIT BAD KEY THIS RIGHT MODEL NO WD52525

Sep 09, 2008 | Televison & Video

2 Answers

NEC VT47 lamp won't light


According to the manual, yes . . .probably gone past the recommended hours of lamp use. Press the OFF or the HELP button on the remote for 10 sec, this will reset the lamp hours value and allow the unit to come on. If it don't, NEC will tell you that it has to be sent to a repair center.

Aug 29, 2007 | NEC VT470 Multimedia Projector

Not finding what you are looking for?
Samsung L100 Digital Camera Logo

Related Topics:

29 people viewed this question

Ask a Question

Usually answered in minutes!

Top Samsung Cameras Experts

kakima

Level 3 Expert

102366 Answers

Cindy Wells

Level 3 Expert

4952 Answers

Computer Links

Level 3 Expert

2385 Answers

Are you a Samsung Camera Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...