Question about A4tech R7-10 Mouse

1 Answer

A4Tech R7 problem

I put in the usb device and i press the buttons to synchronize. The usb device flashes for like 10sec how its supposed to but after that, nothing happens. The computer recognizes that its the mouse and the type of mouse it shown on the bottom of the screen. The light of the mouse reacts when you move it but the cursor doesn't move.

Posted by on

  • taaviday Mar 07, 2009

    ive tried all that man. installing latest drivers with Xp and Vista. Synchronizing the signals countless times. The usb device works like its supposed to according to the guide. Blinks for like 10sec after pressing button to find the wavelength. Mouse seems to work fine too. But it might be just that they cant connect to each other.


×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Expert
  • 8,637 Answers

Normal 0 Turn the mouse over and find the small rest/connect button on the bottom of the mouse and press it. This should connect the mouse to the receiver and work properly. If not, try pressing the receiver button and then press the button on the mouse. This should be done whenever you change batteries or glitch.
if that doesn't work try
Normal 0 Try disconnecting the Mouse Receiver from the USB port and reinstall the CD software program. When the software program asks you to connect the Mouse Receiver to the USB port, do so and it should work.
Hope this helps. Bud

Posted on Jan 29, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

KEYBOARD DOES NOT WORK BUT MOUSE DOES


Check the bottom of the mouse for a small button which will allow you to put the mouse into a synchronization mode. The receiver will have a similar button. Press both and move the mouse around a little until the receiver stops blinking, indicating that the mouse is now synchronized with the receiver.

May 03, 2011 | Fellowes Wireless Keyboard & Optical Mouse...

1 Answer

I have microsoft wireless mobile mouse 3000, the usb itself works but the mouse however doesnt even when i change new batteries, i tried reset the mouse but the lighting part appears black..help?


There are several different methods in resolving this issue. Before you perform these methods, make sure that the battery of your cordless mouse is fresh. Then, try this first method..
Method 1: Resynchronize your device with the receiver loadTOCNode(2, 'moreinformation'); To resynchronize the mouse or the keyboard with the receiver, follow these steps.
Note When you synchronize the mouse or the keyboard with the receiver, put the device near the receiver and put any other wireless keyboards and mouse at least 6 feet away.
  1. Press the button on the receiver, and then verify that the light on the receiver starts to blink.

    Note Some newer Microsoft devices are permanently bound to their receiver and cannot be reset. If your device does not have a button, skip to Method 2.
  2. If a dialog box appears on the screen in several seconds, follow the instructions that appear on the screen. Otherwise, go to the next step.
  3. Press and release the Connect Channel button on the bottom of the mouse or the keyboard.
  4. Check the green light on the receiver. A steady green light means the synchronization was successful. If the problem persists, try steps 1 through 4 again.
  5. For the Wireless Notebook mouse: This issue can occur if the micro-switch on the bottom of the mouse is not released. Use a pin or a pen to try to release the button if it is depressed.
The following example shows the buttons to push to synchronize a wireless hardware device

mongkey_1.jpg
Method 2: Install the latest software loadTOCNode(2, 'moreinformation'); Download and install the latest Microsoft IntelliPoint and/or IntelliType software. For more information, visit the following Microsoft Web site:
http://www.microsoft.com/hardware/download/download.aspx?category

I hope these works for you. Should you need the other methods, kindly reply for follow up. Good Luck!
Mongkey
"Understanding explains better..."

Jan 30, 2011 | Microsoft Wireless Mobile Mouse 3000

1 Answer

Bought a logitech wireless mouse for my new laptop from ebay. It came with no instructions. I have no idea how to use. It has no batteries but a flash drive


By a flash drive I'm guessing you mean a USB stick. What you need to is find a USB port on your computer/laptop and plug it in. There might be a synchronize button on the mouse and USB stick if so you need to press them both and then your mouse should be working. I hope this helps. :)

Dec 04, 2010 | Logitech Cordless Mouse

1 Answer

How to connect my wireless keyboard and mouse


To connect wireless keyboard and mouse devices, use the following methods in the order.

Synchronize your device with the receiver. Put the device near the receiver at least 6 feet away from it.

Press the button on the receive to verify the light on to start the blink.
Note: Some newer devices are permanently bound to their receiver and cannot be reset. If your device don't have a button, skip on method.

Follow the instructions dialog box appear on the screen. Press and release the Connect Channel button at the bottom of your wireless keyboard and mouse.

Check the green light on the receiver. A steady green light means the synchronization was successful.

f9b8062.jpg4188221.jpg05c2d07.jpg

Do not put your mouse or the receiver near any electrical devices, especially transmitters such as cordless or cellular telephones or other wireless mouse devices or receivers. Do not put your keyboard and mouse or the receiver on metallic surfaces or objects, especially long metallic rails or cables.
And last Install the latest software.

Good luck!

Jan 12, 2010 | Computers & Internet

1 Answer

My Kensington wireless keyboard (Ci70) just stopped working. I have no idea why. The mouse works just fine. XP Pro SP 3. Have rebooted. Unplugged the USB interface device. Plugged back in. Rebooted....


Replace batteries in keyboard and re-sync the devices

>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>- --> Synching Mouse or Keyboard with Wireless Optical Desktop trnsp.gif Question My mouse or keyboard doesn't work with my Wireless Optical Desktop (Model Number: 64373). What's wrong and how do I fix this problem? trnsp.gif Answer Your mouse or keyboard has lost its sychronization with the Wireless Optical Desktop, which can occur after changing the batteries, for example.

To synchronize your wireless device with its receiver:
  1. Move the device within three (3) feet of the receiver.
  2. Press the button on the receiver.
    If the receiver has an LED, the light blinks.
  3. Within ten (10) seconds, press the button on the underside of your wireless device.
    If the receiver has an LED, the light glows solidly when synchronization is successful.
Early production units of some wireless devices may require repeating the above instructions two or three times.

Timing, distance, and objects impeding the wireless signal may influence your success. While usually unnecessary, some customers have reported better results by:
  • Holding the wireless device very close, within three (3) inches of the receiver.
  • Entirely ignoring the receiver's light.
  • Simultaneously holding the buttons on both the receiver and the device for from ten (10) to twenty (20) seconds.

Dec 12, 2009 | Kensington Computers & Internet

1 Answer

Optical light on Mouse not working


Hello,

maybe the battery?
follow the steps below to troubleshoot the mouse
Wireless mouse does not respond (generic instructions)

Try to Resynchronize your device with the receiver(connector)
Follow these steps.:
Note When you synchronize the mouse or the keyboard with the receiver, put the device near the receiver and put other wireless keyboards and mouse at least 6 feet away.
1. Press the button on the receiver, and then verify that the light on the receiver starts to blink.
2. If a dialog box appears on the screen in several seconds, follow the instructions that appear on the screen. Otherwise, go to the next step.
2. Press and release the Connect Channel button on the bottom of the mouse or the keyboard.
3. Check the green light on the receiver. A steady green light means the synchronization was successful. If the problem persists, try steps 1 through 3 again.
For the Wireless Notebook mouse: This issue can occur if the micro-switch on the bottom of the mouse is not released. Use a pin or a pen to try to release the button if it is depressed.
or
Try different port and restart your computer.
or
Reinsert the batteries or install fresh batteries
If you have the possibility check whether the problem is because of your computer or the device, try the mouse or the keyboard on a different computer.

Sep 06, 2009 | Microsoft Wireless Notebook Optical Mouse...

1 Answer

Mouse


Try using an updated software driver for your model.

Just visit A4tech's support and download page HERE.

Choose your model in the drop down boxes.

Download and install and you should be back in business.

Let me know if you run into any problems.

Please don't forget to rate my solution FixYa

Thanks!

Sep 17, 2008 | A4tech R7-10 Mouse

1 Answer

R7 doesn't work properly


Normal 0 Try disconnecting the Mouse Receiver from the USB port and reinstall the CD software program. When the program asks you to connect the Mouse Receiver to the USB port, do so and it should work.
Hope this helps. Bud

Apr 24, 2008 | A4tech R7-10 Mouse

1 Answer

Wont work


IT WILL WORK IS IT A WIRELESS MOUSE

Feb 15, 2008 | A4tech R7-10 Mouse

1 Answer

Powersaver R7 wireless keyboard and mouse


how to connect r7-10 mouse to pc ?do i press something?

Dec 29, 2007 | A4tech A-Shape Keyboard/Optical Mouse...

Not finding what you are looking for?
A4tech R7-10 Mouse Logo

Related Topics:

468 people viewed this question

Ask a Question

Usually answered in minutes!

Top A4tech Computers & Internet Experts

micky dee

Level 3 Expert

2638 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18333 Answers

Tony

Level 3 Expert

2598 Answers

Are you an A4tech Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...