Question about Euro-Pro 473

1 Answer

I have a Janome that will not pick up the thead from the bobbin at all ! Help

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 4 Answers

You need to make sure the timing is set properly, sounds like it isn't

Posted on Mar 03, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Needle thead isnt picking up the bobbin cotton


the first thing that comes to mind, is to refill the bobbin and then re-thread the machine. you have probably already done this, so next I'd check to see if your using the appropriate bobbin for the machine.

Feb 26, 2016 | Sewing Machines

1 Answer

Upper thead will not catch bobbin thead


try a new needle--make sure the needle is the correct one for the fabric
being sewed
try rethreading the machine top and bobbin
make sure to use every thread guide
try a different bobbin--make sure the bobbin is turned the correct way
in the bobbin case
if the suggestion don't help then the machine may need to be checked for a timing problem

Dec 20, 2012 | Sewing Machines

1 Answer

My Janome 6500p is having bobbin issues


here are my suggestions
1. when your sewing check to see if the thread is coming off the thead take up lever,, I've had this to happen to me & it can jam a sewing machine up
2. it's possible that the bobbin case is worn & needs to be replaced
3.also check your top tension
4. try rethreading the machine top thread & bobbin

Feb 06, 2012 | Janome Sewing Machines

1 Answer

My machine is not picking up the bobbin thread


check the needle to see if it's damaged
make sure to have a 3-5 inch thread tail on the bobbin
then make sure the top thead has a 3-5 inch tail , then hold the top thead with your fingers( away from the needle) & with the other hand use the handwheel on the right hand side of the sewing machine & slowly manually let down the needle into the bobbin area & see if the bobbin thread will come up that way

Sep 26, 2010 | Euro-Pro Shark 60 - 384

1 Answer

Will not pick up bobbin thread


Unusual for this machine. Check to be sure the needle is inserted with the flat side to the back of the machine. If it is, remove the needle plate, bobbin and bobbin case. Turn the hand wheel slowly toward you and see if the point of the hook is above or below the eye of the needle when the hook point is aligned behind the needle. If the eye is above the point of the hook the machine is out of time and best taken to qualified technician.

Jul 04, 2009 | Janome 6019QC Mechanical Sewing Machine

1 Answer

Bobbing thread not picking


Hi,
Make sure you have threaded the bobbin thread correctly. Also your top thread must be correctly threaded in order to pick up the bobbin thread.
Please let me know if I can help any further.

Best wishes,
Graemevm

May 01, 2009 | Janome 6019QC Mechanical Sewing Machine

1 Answer

Machine will not pick up bobbin thread


Sounds like your needle is in too far and it not allowing the needle to go down far enough to pick up the thread.

Apr 20, 2009 | Janome Sewing Machines

Not finding what you are looking for?
Euro-Pro 473 Logo

Related Topics:

51 people viewed this question

Ask a Question

Usually answered in minutes!

Top Euro-Pro Sewing Machines Experts

Bargain Box
Bargain Box

Level 3 Expert

1388 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18298 Answers

Are you an Euro-Pro Sewing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...