Re: What are the three steps in setting a one for all...
Press the device key that you are programming, press and hold the set key until led light blinks twice press code number. if done correctly led light will blink twice
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
To
program your One For All URC-4220 remote control to operate your TV you
can use the direct code entry function.
To enter for a code for
your TV follow these steps:
Turn on your TV.
On the remote, press the TV key once.
Press and hold SET until the LED blinks twice, then
release SET.
Enter the first four-digit code from the code list. The LED will blink twice. If it
does not blink twice, go back to step 2 and try the same code again.
Aim the remote at the TV and press POWER. The device
should turn off. If it does not turn off, repeat steps 2 through 5 with
the next code in the list.
To program your One For All URC-4220 remote control to operate your TV you can use the direct code entry function.
To enter for a code for your TV follow these steps:
Turn on your TV.
On the remote, press the TV key once.
Press and hold SET until the LED blinks twice, then release SET.
Enter the first four-digit code from the code list. The LED will blink twice. If it does not blink twice, go back to step 2 and try the same code again.
Aim the remote at the TV and press POWER. The device should turn off. If it does not turn off, repeat steps 2 through 5 with the next code in the list.
×