Question about Washing Machines

1 Answer

My zanussi 1250 fjs.13978w model washing machine keeps skipping through programmes,it still fills up with water and emptys but wont wash through any programmes ive even tried just putting it on a spin only but just skips through,what could be the problem before i go and buy a new one,thanx.

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 15,935 Answers

It appears your timer/controller has failed in this instance.

For replacement parts - head on over to PartSelect.com or RepairClinic.com and enter in your full model number for a full parts listing.
I recommend both sites because ...


FixYa has no affiliation with either site - I have been using and recommending them for years - trouble free.

PartSelect has a great schematic database for locating the part on your unit and great "testimonials" for each part that often times includes HOW-TO information.
RepairClinic has pictures of each part they sell and also a great how-to and troubleshooting for basic repairs.


If your unit has never been serviced - there should still be an original service manual enclosed in plastic taped to the inside of the shell.
In the service manual are Error codes, maintenance procedures, and troubleshooting steps you can follow.


Anything too complicated or beyond your scope should be handled by a professional.

If you think you want to tackle the repair - and have gotten stuck on a step - reply to your question and I will be glad to help you out.




Thanks for using FixYa - a 4 THUMBS rating is appreciated for answering your FREE question

Posted on Sep 12, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Replacing drum bearing on a ZANUSSI FJS 874 front loader ?


This is not a simple job, it can be fine but requires the complete disassembly of the machine to change the bearings, there are 2 bearings and a seal that require replacement, I can assist in guiding if you wish to do so, it takes around 3 hours total to strip and rebuild.

Jun 16, 2016 | Zanussi Washing Machines

1 Answer

Have just bought a zANUSSI fjs 1225 W. Have run one cycle ( quick wash, 40 degrees, cotton) and the fabric conditioner was not drained away. Is this because it was a quick wash? V disappointed as I need a...


zANUSSI fjs 1225 W. Have run one cycle ( quick wash, 40 degrees, cotton) and the fabric conditioner was not drained away This video will show you how to keep your soap draw clear and how to service the parts Please remember to subscribe to our YouTube channel for all appliance tutorials a 4 THUMBS rating is appreciated for answering your FREE question. And don't forget to like us on facebook

Feb 15, 2011 | Zanussi FJS1225W Front Load Washer

1 Answer

Hi, ive got a zanussi jetsystem excel 1250 FJS-1397W model washing machine. it wont empty the water after a wash. could you tell me what to try or whats wrong? thank you, fiona


Locate and clean filter, which should be at bottom front right of washer, behind drop down or push down flap.
Unscrew anti-clockwise to remove and clean.

Jan 31, 2010 | Washing Machines

1 Answer

Zanussi FJS 1425W - the machine is not spinning the clothes so clothes are quite wet when they are washed so have to spin but this is also not working well - washing purchased approx 7 yrs ago -


hotpoint top loading washing machine serial number TS182924N MODEL NUMBER HNXR1060T8WW. machine won't spin and will not empty water, just a humming noise. number on scamatic diagram 175D275OGO71 MACHINE IS APROX 20 YEARS OLD

Jan 06, 2010 | Zanussi Washing Machines

1 Answer

Zanussi washing machine wont spin


check the drain hole when you start the machine if the water is coming back out , if yes that means your dump valve is bad.

Apr 23, 2008 | Zanussi ZWF1430W Front Load Washer

1 Answer

Zanussi washing machine


Filter can be clogged, pump can be dead or water outlet clogged.

Apr 11, 2008 | Zanussi ZWF1430W Front Load Washer

1 Answer

Washing machine fjs 1025 w can you identify my problem


Put on the machine. Try depressing "end of cycle" button for over 5 seconds. Turn down the temperature knob first. Let me know result.

Dec 27, 2007 | Washing Machines

1 Answer

The Washing Machine fills and then empties with not running a wash cycle


possible a pressure stat fault. some pressure stats have a too high water detector which turns on pump

Mar 27, 2007 | Zanussi F1245W Front Load Washer

2 Answers

Washing Machine


I don't have any experience with Zanussi, but sounds to me like the inlet water valve needs to be replaced.

Aug 08, 2006 | Zanussi FC1200W Front Load Washer

Not finding what you are looking for?
Washing Machines Logo

Related Topics:

84 people viewed this question

Ask a Question

Usually answered in minutes!

Top Washing Machines Experts

Dan Webster
Dan Webster

Level 3 Expert

8147 Answers

Richard Roth
Richard Roth

Level 3 Expert

9472 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Are you a Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...