Question about Alpine CDE-9852 CD Player

1 Answer

Setting the time

I have a Alpine CDE-9852. Can you tell me how to set the clock.
Thanks,
Rick

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 6 Answers

Setting Time
1 Press TITLE repeatedly until the time is displayed.
For details, see “Displaying the Text” (page 13)
2 Press and hold TITLE for at least 2 seconds while
the time is displayed.
The time indication will blink.
3 Turn the Rotary encoder to adjust the hours while
the time indication is blinking.
4 When the hour has been adjusted, press MODE.
5 Turn the Rotary encoder to adjust the minutes
while the time indication is blinking.
The time is automatically set 5 seconds after the minute
adjustment. The time can also be manually set by pressing TITLE.
• To synchronize the clock to another clock/watch or radio time
announcement, press and hold MODE for at least 2 seconds after
setting the “hour.” Minutes will reset to “00”. If the display shows
over “30” minutes when you do this, the time will advance one hour.
Listening to Radio
1 Press SOURCE/POWER until a radio frequency
appears on the display.
2 Press BAND repeatedly until the desired radio band
is displayed.
F1 (FM1) F2 (FM2) AM F1 (FM1)
3 Press TUNE to select the tuning mode.
DX SEEK (Distance mode) SEEK (Local mode)
OFF (Manual mode) DX SEEK
• The initial mode is Distance mode.
Distance mode:
Both strong and weak stations will be automatically tuned in
(Automatic Seek Tuning).
Local mode:
Only strong stations will be automatically tuned in (Automatic
Seek Tuning).
Manual mode:
The frequency is manually tuned in steps (Manual tuning).
4 Press or to tune in the desired station.
Holding down or will change the frequency
continuously.
Manual Storing of Station Presets
1 Select the radio band and tune in a desired radio
station you wish to store in the preset memory.
2 Press and hold, for at least 2 seconds, any one of the
preset buttons (1 through 6) into which you wish
to store the station.
The selected station is stored.
The display shows the band, preset number and station
frequency memorized.
•You will need to start from set up or you will not be able to set the mins

Posted on Feb 20, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I restart my time on the alpine CDE-9852


Here is the info how to reset the time and here is the link to the manual if you need it. This is directly from alpine manual

Setting Time

1 Press TITLE repeatedly until the time is displayed.

For details, see "Displaying the Text" (page 13)

2 Press and hold TITLE for at least 2 seconds while

the time is displayed.

The time indication will blink.

3 Turn the Rotary encoder to adjust the hours while

the time indication is blinking.

4 When the hour has been adjusted, press MODE.

5 Turn the Rotary encoder to adjust the minutes

while the time indication is blinking.


The time is automatically set 5 seconds after the minute

adjustment. The time can also be manually set by pressing TITLE.

To synchronize the clock to another clock/watch or radio time

announcement, press and hold MODE for at least 2 seconds after

setting the "hour." Minutes will reset to "00". If the display shows
over "30" minutes when you do this, the time will advance one hour.




Sep 24, 2010 | Alpine CDE-9852 CD Player

1 Answer

Need to reset the clock on my alpine CDE-9852


Crutchfield has the manual for download here:
http://a248.e.akamai.net/pix.crutchfield.com/Manuals/500/500CDE9852.PDF

The clock settings are on page 8 of the PDF.

Feb 16, 2010 | Alpine CDE-9852 CD Player

2 Answers

I'm having trouble connecting my alpine cde-9852 to my 96 jeep cherokee. is there a wiring diagram online for this? thanks


Constant 12V+ Pink Switched 12V+ Purple/White Ground Black Illumination Light Blue/Red Dimmer Orange Antenna Right Front Front Speakers 5 1/4" Doors Left Front (+) Dark Green Left Front (-) Brown/Red Right Front (+) Purple Right Front (-) Dark Blue/Red Rear Speakers 5 1/4" Rear Deck Left Rear (+) Brown/Yellow Left Rear (-) Brown/Light Blue Right Rear (+) Dark Blue/White Right Rear (-) Dark Blue/Orange

Jul 11, 2009 | Alpine CDE-9852 CD Player

1 Answer

Adjusting the time on an Alpine CDE-9852


Hello bitterswe834,

To set the time, do this:

1. Press TITLE repeatedly until the time is displayed.
2. Press and hold TITLE for at least 2 seconds while the time is displayed. The time indication will blink.
3. Use the volume control to adjust the hours while the time indication is blinking.
4. When the hour has been adjusted, press MODE.
5. Turn the volume control to adjust the minutes while the time indication is blinking.

Hope this helps.

May 24, 2009 | Alpine CDE-9852 CD Player

1 Answer

Need to set my clock alpine cde9852


You need to push and hold the title button till it flashes the hour. Then turn the volume knob to set the hour. Next push the mode button and the minutes will flash. Again turn the volume knob to set.
The title button is to the far right and the mode button is below the volume knob. That should do it!

Dec 01, 2008 | Alpine CDE-9852 CD Player

2 Answers

CHANGE CLOCK ON MY ALPINE CDE-9852


push title button til time comes up, then push and hold title button again til time flashes, when it does you can turn the dial til time you want comes up,then hit mode button below dail to switch to minutes , then repeat

Nov 10, 2008 | Alpine CDE-9852 CD Player

1 Answer

Alpine CDE-9843


Page 16 of the manual:
http://vault.alpine-usa.com/products/documents/CDE-9841,%2043,%2045%20OM.PDF

Setting Time
1 In the Clock priority mode, press and hold
TITLE for at least 2 seconds while the time is
displayed.
The time indication will blink.
2 Turn the Rotary encoder (CDE-9845/CDE-9843
only) or press
4 and 3 (CDE-9841 only) to adjust
the hours while the time indication is blinking.
3 When the hour has been adjusted, press the
Rotary encoder (CDE-9845/CDE-9843 only) or
press MODE (CDE-9841 only).
4 Turn the Rotary encoder (CDE-9845/CDE-9843
only) or press
4 and 3 (CDE-9841 only) to adjust
the minutes while the time indication is blinking.
The time is automatically set 5 seconds after the minute
adjustment. The time can also be manually set by
pressing the Rotary encoder (CDE-9845/CDE-9843 only)
or press MODE (CDE-9841 only).
• To synchronize the clock to another clock/watch or radio time
announcement, press and hold the Rotary encoder (CDE-9845/
CDE-9843 only) or press and hold MODE (CDE-9841 only) for at
least 2 seconds after setting the “hour.” Minutes will reset to 00. If
the display shows over “30” minutes when you do this, the time
will advance one hour.

Apr 26, 2008 | Alpine CDE-9843 CD Player

1 Answer

Unable to set clock to the correct time


Can get the PDF of the manual on line and pg 8 tells you how. Basically you hit the title button till time is displayed. (Title button is on the right of the screen) Then hold the title button down until time blinks (hour blinks) to the dial and turn the dial and the hour will adjust. Then press the mode button (the one just below the dial) Then turn the dial again to fix the minutes.

Mar 24, 2008 | Alpine CDE-9852 CD Player

1 Answer

Heating up on back of cde 9852 alpine cd player


try to chek the regulator or replace it and install a heatsink for him

Jan 31, 2008 | Alpine CDE-9852 CD Player

Not finding what you are looking for?
Alpine CDE-9852 CD Player Logo

329 people viewed this question

Ask a Question

Usually answered in minutes!

Top Alpine Car Audio Receivers Experts

xxxxxx xxx

Level 3 Expert

4706 Answers

Jose Velazquez
Jose Velazquez

Level 2 Expert

227 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you an Alpine Car Audio Receiver Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...