An expert who has written 20 answers of more than 400 characters.
An expert who has answered 20 questions.
Re: chip says full after few pics
The chip may not be inserted correctly. You can tell by seeing or not seeing SD symbol in the view screen. Try removing the SD card. Go through the memory and see if the pictures were saved to the camera or to the card. If the pictures were saved to the camera, turn off the camera and re-insert the card. See if the cards responds by showing more pictures available for taking and move the pictures to the card. If the pictures were saved to the card, then the card may need to replaced.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Try inspecting the memory card slot, eventually with a magnifying glass. Sometimes just a little bit of dust, a small paper or other debris, can block data transfer. Be sure al contacts on the card, but also in the camera are clean and shining. Never use sharp tools in or around a camera. Don't scratch the contact points.
And to make sure you can put pictures on a memory card, there must be space. If possible try to format the card in the camera. Just to make sure the camera sees the correct file system on the memory card.
Could be the memory chip isn't working right. They are very sensitive to improper handling. I prefer to use the usb download cable rather than removing the card and inserting it into the computer. If you touch the gold contact fingers on the card, static electricity can damage it, personal experience. Some replacement chips have a lifetime guarantee, which I have used. Try a new mem card, they are sort of cheap. Also if you use the program that came with the camera, it might reset the functions on the chip. Hope this helps.
This occassionally happens with memory cards formatted using FAT. The simplest way for you to get the pics of the card when such a thing happens is to get a card reader. Pop the card in to the card reader, connect it to your PC and transfer the pics. Then format it using FAT32. I have noticed that my card was a lot more reliable in saving pics compared to FAT.
it is ur luck if camera still works in indoor pics then only take indoor pics but the pics are not crisp and clear they need to be there will be dis colored and scratchy but u can try see which are better i think pics without flash with adequate light will be better one's
you need to adjust down the resolution you are shooting in. Fine JPG vs RAW makes a big difference on how much memory goes into each image. RAW will mean more data in each image, but fewer images will fit.
It sounds like your lens's focus element is stuck. Given the events you describe it is possible that a grain of sand has worked its way into the focus motor's gearing and jammed it up. Normally the small motor moves the focus optic in and out to achieve proper focus, if its movement is limited or completely jammed you will experience blurry pictures.
The camera will have to be disassembled and the sand cleaned out to restore normal function. There are repair providers you can find online who can work on your camera.
Advance Camera Repair