Question about Lomo Supersampler 35mm Point and Shoot Camera

2 Answers

I can't seem to click to take a photograph

This is my first time using my super sampler.
i have no problem loading the film and then take my first shot by pulling the string thingy.
so, the problem occurs by the time i try to take the second ones. the string thingy works but the click that has a name "now" on it doesnt seem to click like it did the first time. when i push its a bit hard or didnt quite as flexible as the first one.
please help how to get this super sampler running.
is it the film inside was jamming or maybe after the first shot i suppose to be doing other step to it or what?
i really have no clue with it.
thx a lot. please respond ASAP.

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 3 Answers

Pulling the string doesn't take the picture, it advances the film. Press the button on top of the camera, you'll hear the shutters go, and then pull the string. Just make sure the film is taut when you load it, and that you're not yanking on the advance string too hard.

Posted on Jan 21, 2009

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I have the same exact problems, mine works only some times , and ofcourse i press the NOW button . on a 36 film i can only tike like 10 pictures.  I think the problem is that we can not load the film properly

Posted on Apr 03, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do you change the lens?


If you decide to change the lens in the middle of a roll, just do it in the dark, like in a closet or using a "film changing bag"

Here is a link to one such bag

http://www.amazon.com/gp/product/B00023J...

Photographers who needed to load sheet film while in the field, use as well as motion picture, second assistants when loading film into film magazines when in the field, away from the studio Source(s): proFotog

Mar 09, 2011 | Cameras

1 Answer

Nikon Super Coolscan 5000 ED


The scanner is only 24mm wide and 36 mm long, so rotate you slide by 90 degs.

May 03, 2010 | Nikon Super Coolscan 5000 ED Film Scanner

1 Answer

My action sampler doesnt work properly.. i have loaded the film and shoot correctly, i guess :d but the result is not in four panels, but just like an usual film cameras (in 1 panel only).. what's wrong?...


The problem is your lab, assuming you got prints, the lab printed them like normal, But look at your negatives, you will see the 4 panel images.

Best to print an Actionsampler photo from the internet or lomography website, just print a rough one on regular paper, 4x6inch, and take it to the lab to show them how the prints should be. They should re-print from your negatives for free because they made an error the first time. It may have been an automatic adjustment by the machine they use.

Dec 19, 2009 | Lomo Action Sampler 35mm Point and Shoot...

1 Answer

Pentax ME wider II problem


It should stop advancing the film when the camera counter is on #1 exposure with or without film.

Dec 08, 2009 | Pentax ME Super 35mm SLR Camera

1 Answer

The shutter button does not appear to click down and the lense does not open so no picture is taken. Usually it makes a sound and you know the picture has taken. HELP MEEE????


I had a similar problem with another brand of this type of camera. I would click the shutter and hear it open but it would not go through the series of four lens exposures unless I manually turned the film advance wheel . I think it may be because the motor isn't strong enough to draw the film across and trigger the shots. cheap plastic, ya know. I never got the film developed but im interested to see if it got anything at all.

Oct 28, 2009 | Lomo Action Sampler 35mm Point and Shoot...

1 Answer

My super sampler wont click after i take my firs shot??


Pull the string to advance the film. As long as your film sprocket holes are lined up with the sprockets in the camera, your shutters will fire the next time you press the shutter button.

Dec 31, 2008 | Lomo Supersampler 35mm Point and Shoot...

1 Answer

Super sampler How to get film out?


once you rewind the film line up the arrows on top of the winder then gently lift the winder to release the film canister

Jun 30, 2008 | Lomo Supersampler 35mm Point and Shoot...

1 Answer

Film Advancer loose


Hi., rotate the rewinder clockwise until the film will tightened , hold the film rotator , observe the rewinder knob moving , it means the film are engage will. then shoot for favorite angle.

Feb 18, 2008 | Pentax ME Super 35mm SLR Camera

Not finding what you are looking for?
Lomo Supersampler 35mm Point and Shoot Camera Logo

Related Topics:

345 people viewed this question

Ask a Question

Usually answered in minutes!

Top Lomo Cameras Experts

kakima

Level 3 Expert

101554 Answers

Steve

Level 3 Expert

3287 Answers

yadayada
yadayada

Level 3 Expert

67912 Answers

Are you a Lomo Camera Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...