I NEED HELP PROGRAMING MY HT1000 TO SCAN

How do I program ESPN game changer remote control - Fixya

www.fixya.com/.../t6930391-program_espn_game_changer_remote_co...

Nov 21, 2010 - how do I program ESPN game changer remote control - RemoteControls question. ... You can also use the "Power Scan method": Turn TV off. ..... I need code for an lg bh100 dvd player .... I need the code for an emerson hd flat screentv using a universal Game Changer Remote control espn edition.

Game Changer Remote Programing Codes - LuLuSoSo.com

www.lulusoso.com/.../Game-Changer-Remote-Programing-Codes.html

We Provide 20 for you about game changer remote programing codes- page 1. ... OEM remote control,OEM quality standard remote control for TV or STB 3. ... ZTH3607Use: universal Place of original: Guangdong China (. ... Samsung Tv Remote ControlCodes List · Remote Control Codes For Lg Tv Lcd · Universal Remote ...

See previous post...

You need software for this radio and programming scan mode

On the HT1000, there is an A, B, C toggle switch just under the On/OFF/Volume control knob.

When set to A, the radio is IN the scan mode.

When set to B it is NOT in the scan mode.

When switched to C, it is in the scan program mode. There is a green button on the left side above the PTT switch. When you set it to C, you switch the CHANNEL SELECT knob to the desired freq you want to add to the scan list. When there, you push the green button. ONE push gives you a red indicator light on the top of the radio. A 2nd push gives you a GREEN light displayed. A 3rd push gives you NOTHING lit up.

The 1st push (RED light) means you have selected THIS freq as your PRIORITY channel of your scan list when scanning.

The 2nd push (GREEN light) means it is just IN the list, not as a priority channel.

NO light means it is NOT entered into the scan list.

Once you have your list set up, simply flip the A,B,C switch back up to A and you're scanning what you selected.

HOWEVER All of the above is dependent on whether or not the ORIGINAL setup programming from the factory set the radio up for these features to work. If it WASN'T set up that way, you'll have to have it reprogrammed to activate the buttons and the toggle switch for those features to work.

ABC switch = Function switch
Can be programming to many functions like sub channel or talk group on trunking radio or scan on/off, power lo/hi, repeater/talk around...ect......depends on what software allowing you to do.

You're on scan mode but have no channel in scan list. You might have to go to scan PROGRAM mode and select the channel you want to scan then press a side button to put that channel in the scan list then will scan.

radcom907

Since you are receiving the weather (Wx) channel, the radio appears to be receiving fine. It might be that your fire frequencies are not programmed into the radio. Check your programming, as well as checking your scan list. The Wx channel should not be included in the scan list, as there is constant radio traffic on this frequency, and your radio would get stuck there during the scan process.

The scan is on and you do not have a scan list programed.

This is the most common problem connected to your post. Hope that helps, Bill.

First, your radio must have one of the side buttons programmed to be scan on/off. You will need to experiment while one or more of the channels is active and press the side button to see if it puts you in scan mode.

If it is, most likely a short press turns on scan, and a long press would be nuisance channel delete. This feature will temporarily eliminate a channel out of your scan list for the time your have your radio turned on. Once you shut the unit off and turn it back on, it would return to the original setting.

The only way to have a button programmed for scan/nuisance channel delete, is to us Motorola propritary software available to dealers and certain businesses and governement agencies. If you are needing to turn on scan or change a scan list, you would need to have the radio reprogrammed. This typically will cost between $25 and $40 at more dealerships.

Hi bonkuman,

To my knowledge the Motorola HT1000 is not a trunk system radio, it is as a "conventional" 16 channels two-way radio. Motorola classifies this radio as intended for Government & Enterprise. In my country, we call them "Commercial" radios as oppose to "Amateur" radios. In a way, yes they may be termed "professional" as their claimed performance and durability exceeds those of other radios. Incidentally, the Motorola HT1000 has been discontinued and was replaced with the PR1500.

Hope this be of initial help/idea. Pls post back how things turned up or should you need additional information.

Good luck and kind regards.

Thank you for using FixYa.