Question about Kodak Easyshare Z812-IS Digital Zoom Digital Camera

1 Answer

Camera will not turn on

The camera will flash up the startup screen for a second and then shut off. It does this everytime I turn it on, and it has brand new lithium batteries in it.

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I just had the same problem with my Kokak 712. I used the solft cloth that came with the kit and removed the batteries and cleaned the flap of the battery with a cloth several times. Replaced a new battery, even though my battery was new, and it works now.

grace

Posted on Feb 11, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do i turn flash on


Click on the icon on the right down corner called "DISP" and then click on the first optiong "Normal" and close it ... finally look on the right middle of the screen and click on the flash icon , it looks like a thunder and then click on the first one "AUTO" if the place its dark itll flash , but if it is not necessary its not gonna flash, the second one is to flash everytime even if its not needed..
I hope I helped in something.

Sep 19, 2010 | Sony DSC-T70 Digital Camera

1 Answer

Shuts off after startup


did you ever get this corrected mine started doing this today as well.

Jul 11, 2009 | Pioneer AVIC-F700BT Car GPS Receiver

1 Answer

I turn camera on. Lens comes out. beep 3 times. turns off.


Everytime I try to turn it on, the lens comes out for about a second, the camera beeps 3 times, the lens retracts and the camera shuts off. The battery is completely charged and the camera is only 4 months old. HELPP :(

Jun 17, 2009 | Samsung Digimax S500 Digital Camera

2 Answers

Camera turns on with a bit of a tremble but shutter locks


I have an 5D with the same problem, It looks like the Anti shake does not initialize properly, The only bypass I found that worked (except for a real repair) is to set the display light timeout for 5 seconds, The standby timout for 1 minute, Turn the camera off, and on again, Wait for 5 sec then the display goes blank, wait for 1 minute then the camera goes in standby, (light from CF card flashed red 1 time) Then touch any button to re-activate the camera and... voila... everything works, including taking normal pictures and the anti-shake !!! So it only takes a minute everytime to startup..

Jun 05, 2009 | Konica Minolta Maxxum 7D / Dynax 7D...

1 Answer

My camera won't turn on!


Check your memory card you need a sd card or mmc for this camera make sure your card is not an sd hc card over 2gb it will not support it

Feb 14, 2009 | DXG Technology DXG-506V DV Digital...

1 Answer

The Flash on my camera won't work


When taking pictures, you must really be allowing time for the camera's flash to be charged
before you could take another picture so that camera will have enough time to rest and it
could function normally.
But if the camera was dropped, then it's really causing those kinds of issues like flash will not work properly.

You could still try these steps below:

First, do the POWER RESET:
- Turn off camera
- Remove batteries for a minute
- Reload batteries
- Turn on camera

Second, do the MASTER RESET
- Be in AUTO mode
- Press on MENU button
- Press on the right button until you see SETUP 2
- Scroll down until you see RESET
- Press the right button to pick up on YES or NO
- Press on OK/MENU button for changes to be saved
- Turn off camera for a few seconds so that settings will be refreshed

Turn it on and take a picture.
When you want to have just the AUTO FLASH.

- Rotate the mode dial to PROGRAM
- Press the LEFT/FLASH button until you've seen the
LIGHTNING icon with the Letter A on the leftmost part of the screen
- Try to take a picture by pressing and holding the shutter button
halfway first for 3-5 seconds and then press it all the way down

Dec 13, 2007 | Samsung Digimax S630 Digital Camera

1 Answer

Polaroid a520 doulble flash


The first flash is to lessen red eye in picture when 2nd flash goes off.

Nov 22, 2007 | Polaroid PhotoMax PDC 4055 Digital Camera

Not finding what you are looking for?
Kodak Easyshare Z812-IS Digital Zoom Digital Camera Logo

Related Topics:

117 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kodak Cameras Experts

kakima

Level 3 Expert

102366 Answers

Tony

Level 3 Expert

2598 Answers

Greg Cann
Greg Cann

Level 3 Expert

1114 Answers

Are you a Kodak Camera Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...