Question about Logitech Cordless Action Controller for PlayStation 2

1 Answer

Remote contoller mode light flashing controller not working?

The logitech remote controller light is flashing red and the contoller is not functioning. The receiver on the consul is flashing green. Changed the batteries made no difference?

Posted by on

  • Tahn Jan 05, 2009

    I have the same problem, controller for ps2 is flashing red, the receiver is flashing green, we tried replacing the batteries and it still does not work.

  • Anonymous May 01, 2009

    I have the same problem, controller for ps2 is flashing red, the receiver is flashing green, we tried replacing the batteries and it still does not work.

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 34 Answers

Hold down the connect button on the receiver and the mode button on the controller at the same time for approximately 10 seconds. This is a 2.4 GHz wireless transmitter and receiver (connection is somewhat like your WIFI router and laptop computer) and they need to reconnect sometimes.

Posted on Jun 17, 2009

  • sinik Aug 29, 2010

    that is how it is done, thank you internet!!!!

  • kloud92 Jun 06, 2011

    it did not work at all

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I can't sinc my remotes to my wii


Try unplugging the Wii then plugging it in and press the red button on the wii then press the red button on the remote until lights flash then press the red button on the wii...hope it helps

Aug 31, 2013 | Nintendo Wii Remote Controller

1 Answer

Red light blinking on ps3 remote


if your PS3 rempte is blinking red that means that you should use a usb cable from the remote to the console.

i recommend not playing the game while they are connected.

Dec 02, 2012 | Logitech Cordless Precision Controller for...

1 Answer

The control lights of my wii just keep flashing but the controls don't do nothing to the wii, I try new bateries and still don't work


First, remove the battery cover for the Wii Remote
Then open the small panel on the front of your Wii console
While holding down the sync button on the controller, press the sync button located under the small panel on the console, wait a moment, your contoller should then be synced.

Jul 22, 2011 | Nintendo Wii Remote Controller

1 Answer

Red light flashes on the D/mode button. The controller wont work.


you need to make sure the controller is compatible with ps3, and try to re snyc

Nov 09, 2010 | Logitech Cordless Precision Controller for...

1 Answer

Wii remote


Try to resync your remote. To do this:
1) Locate the red button under the battery cover on your remote.

2) Locate the red button near the sd card port on your console.

3) Press both buttons within a couple seconds of each other.

4) Wait a few seconds if your remote doesn't sync, retry.

Good luck. Please rate, thanks.

Mar 03, 2010 | Nintendo Wii Remote Controller

1 Answer

The wii remote is not linking with the tv so cant use it


You probably need to synchronize your Wii-Motes to your system. When you press buttons on your controllers do the four LED lights flash at the bottom? This is a clear indication. Your Wii needs to be turned on. You need to open the little door on the front of your Wii where the SD card slot is. Under the slot there is a little red SYNC button. Then open the battery compartment on the backs of your remotes. There is another little red SYNC button here. Press the button on the remotes and then while they're flashing on the Wii and it should sync. If it doesn't work the first time try again. Good luck!

Nov 23, 2009 | Nintendo Wii Remote Controller

2 Answers

On one of the wii controllers all i get is 4 blue lights flashing then nothing


The Wii-mote probably just needs to be synchronized to your Wii. Open the battery compartment on the back of your remote and open the front SD card slot on your Wii. Push the red SYNC button on the Wii and then the little red button on your Wii-moteand it should sync to your console.

Nov 10, 2009 | Nintendo Wii Remote Controller

1 Answer

Wii remote is not responding and every time i press a button the lights flash, after the battery was fully charged. I put regular bateries and nothing, either.


you might have to re sync the remote to the consol again open the front cover with the wii on press the red sync button then press the red button inside the batt compartment on the remote you will have to have reg batts in the remote to do this then put the rechagable pack back in this might help ive had to do this a couple times

Jun 20, 2009 | Eforcity Charging Station for Nintendo...

1 Answer

I need help with a cordless remote to work with my ps3. The remote doesn't have a usb connection (logitech cordless precision) model 840-000016


i believe that you controller takes batteries and works along with a receiver that looks similar to a flash drive. hope this helps :)

Feb 23, 2009 | Logitech Cordless Precision Controller for...

1 Answer

We bought an additional wii remote and have tried to sync it but all we get is all 4 blue lights flashing??? wont work? thanks


Well, I don't have a Wii myself but I did some checking and found this. Hope it helps.

When you first get a second Wii remote, you have to press the red button inside the battery compartment and you press the red button by the Wii's SD Card slot simultaneously. Then you turn on the game and you press the Wii menu button. Go to controller settings and select reconnect remotes (can't remember if that's the exact words, but it's something like that). Next you hold 1 and 2 on the first remote, then hold 1 and 2 on the second remote. And that should do it.

Jan 19, 2009 | Nintendo Wii Remote Controller

Not finding what you are looking for?
Logitech Cordless Action Controller for PlayStation 2 Logo

2,891 people viewed this question

Ask a Question

Usually answered in minutes!

Top Logitech Video Game Consoles & Games Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18334 Answers

Rob boss

Level 1 Expert

2 Answers

Are you a Logitech Video Game Console and Game Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...