Question about Kenwood KDC-7009

2 Answers

KDC 7009 - lost manual, have code,but not sure next step

Hi! i recently reconnected my trusty KDC 7009 after a long absence. lucky me, i remember the code, and can enter it. trouble is, i can NOT remember what to do next. what to i press? i've tried all the buttons. please help - i have a 12 hour drive in my trusty VW and need music... thanks!

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer
Re: KDC 7009 - lost manual, have code,but not sure next...

Once you enter the 4 digit code, press and hold the "display" button on the radio. The "display" button is located in the upper right hand corner of the KDC-7009 stereo. After holding the "display" button, you should see the words "APPROVED" displayed across the screen. Happy listening!

Posted on Feb 24, 2009

  • Level 1:

    An expert who has achieved level 1.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 3 Answers
Re: KDC 7009 - lost manual, have code,but not sure next...

Try putting in 3501 if that dose not work thy pressing the reset button and the proses of ilemination

Posted on Aug 19, 2007

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


3 Points

Related Questions:

1 Answer

Code for my kdc-8009

here you can have it for $25.00...

That code is $ for all shops, none of them will give it up. Kenwood does not want the code public, or it would defeat the point of having one. If you are friends with a Kenwood tech, you may be able to get it.

Jun 12, 2009 | Kenwood KDC-7009

3 Answers

Kenwood kdc-322 car cd stereo

use the preset buttons to enter the code.
first press the number 1 button until the correct first number of your code appears
then press the number 2 button until the second number of your code appears
then the 3 button for the 3rd number of your code
then the 4 button for the last number of your code

I am writing this from memory so the next step you may need to try a couple of things, my memory is failing me as I get older.

After the code is entered you will probably need to press the track forward button or the src button. it should now be ready to use.

If that does not work, reply back with a post and I will look it up in the service manual at work tomorrow, but I am pretty sure this will work.

Please give me a good rating if this has been helpful

Jun 18, 2008 | Kenwood KDC-322 CD Player

2 Answers

Kenwood kdc 7009 - just bought car w/ stereo in it, but no remote or codes ?

Look for a small hole in the face plate. Take the tip of a pen and try holding it in for a few seconds. Re-setting it should work.....

Jan 26, 2008 | Kenwood KDC-7009

1 Answer

Kenwood kdc-7024

Use the am and fm buttons to increase or decrease the numbers and use the seek up button to move to the next number and then press and hold the seek button to enter the code ( these buttons are on the bottom right hand side of the fascia)

Oct 17, 2007 | Kenwood KDC-7024 CD Player

2 Answers

It just wont work!!!!

What cars do you have? year/make/model

Aug 19, 2007 | Kenwood KDC-7009

Not finding what you are looking for?
Car Audio Receivers Logo

375 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kenwood Car Audio Receivers Experts

xxxxxx xxx

Level 3 Expert

4679 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Pablo Gonzalez

Level 3 Expert

733 Answers

Are you a Kenwood Car Audio Receiver Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides