Question about Avery 9100 Thermal Printer
Also, what I did was to first back all of the labels out and back into the reel. Turn machine off, then back on. With the peel lever down, as mentioned above, begin to load the labels as shown. The light will blink and it will make a noise as it senses the label. It will begin to draw the label in and you need to make sure you create tension on the labels as they are being pulled in. I accidentally did this by holding pressure against the reel, and sure enough, the thing pulled the first label into place and quit frickin blinking!!! Labels printed fine afterwards!
Posted on Feb 11, 2010
Had the same problem, position the peel lever to the down postion but don't use the peel feature and relaod the label. This stoped the blinking amber light when loading labels of all sizes. Hope this helps
Posted on Aug 11, 2009
Tips for a great answer:
Mar 01, 2014 | HP OfficeJet Pro K8600 Printer
Jun 05, 2011 | Printers & Copiers
Dec 18, 2009 | HP PSC 1315 All-In-One InkJet Printer
Aug 17, 2009 | Printers & Copiers
Jun 27, 2009 | Kodak ESP 5 Printer
May 30, 2009 | Avery AVE09000 Automatic Lbl...
Apr 28, 2008 | Avery 9100 Thermal Printer
729 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: