Question about iLO (2 GB) MP3 Player

1 Answer

My Ilo 1GB Player isn't playing songs correctly...

My Ilo 1GB MP3 player is uploading all my songs to the player (about 211 songs) and is still under about half of its full holding capacity. I look on the songs in the player and it says they are all there, but when I play regularly it'll skip some and go from like 2 to 8 and 54 to 72 and ect... I can go into the song list I have and access the songs that won't work, but its like its paused and wont play at all. I keep pressing play and it still doesn't. Also I've been played it on random and noticed it would play a song that didn't work and reset the whole player. Would deleting all the files in the player from the computer help?? If any helpful solutions please e-mail me at demon_1012003@yahoo.com. (Given just incase my e-mail isn't shown elsewhere.)

Posted by on

  • Bassman15 Jan 04, 2008

    I have the same problem. The songs are loaded in the menu but they won't play. I just skips them.

    A solution to this problem would be greatly appreciated.

×

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 8,596 Answers

The songs are in the wrong format

There are two ways to format an Mp3 player - one on the computer itself, and one in Windows Media Player. Both methods will end up erasing all the songs on the player, but the player will be "good as new" after that. Sometimes reformatting in this manner will override the player's native formatting and cause problems - this can be reversed in most cases by updating the player's firmware. Firmware upgrades are available from most manufacturers' websites.

WARNING: The following procedures will erase all songs on the player.

Check if the file system is NTFS. If yes, format it to FAT or FAT32. - Connect player to computer, double-click my computer, right click on icon of mp3 player and select format. This only applies to Windows-based computers.
You can also format the player in Windows Media Player itself:
Connect your Mp3 player to the computer and open Windows Media Player. Click on the Sync tab. Pull down the drop down menu underneath the Sync tab by moving your cursor over the Sync tab and left clicking on the little black arrow underneath the Sync tab. Highlight "name of Mp3 player here 1GB" (wording may vary slightly), and then select "Format." - this should erase everything.
-Tha Mp3 Doctor

Posted on Jul 06, 2008

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

I can download music on my mp3 but when i go to play it it says its empty


Ilo player must be synchronized, coping and pasting files is not enough:

  1. Start Windows Media Player and select following menus: "File.", then choose "Add to Library." then the "Add" button. Then, look for the folder where your keep the mp3s to upload.
  2. Plug the Ilo MP3 player into USB.
  3. Click the "Sync" tab that you find at the top of Windows Media Player . You will find the Ilo MP3 player on the right side of Windows Media Player. If Ilo is not ther, then right-click on Sync tab and click "Refresh Devices."
  4. Click "Library" then "Songs." on Windows Media Player . Highlight the son songs, and choose "Add to Sync List."
  5. Click "Start Sync" button that will appear at the bottom right corner of Windows Media Player. The songs will then be uploaded to the Ilo MP3 player.


Sep 07, 2009 | iLO (2 GB) MP3 Player

1 Answer

I cant play all songs in china mp3 .so what would i do to play all songs..


first check that every songs r mp3 format? if not convert that mp3 and upload that. then it become ok

Aug 03, 2009 | iLO (2 GB) MP3 Player

1 Answer

E260 player won't read some songs


Check if the size of the disk is actually what they say it is because I have seen where 1gb was written on an mp3 player whereas it was stretched, e.g, 128mb might be stretched to 1gb, so whenever you put songs that exceeds 128mb the other ones will not play at all. It has happened to me several times.

Jul 01, 2009 | SanDisk Sansa e260 MP3 Player

1 Answer

Deleting songs


From the computer - use Windows Media Player to delete - higlight song name ON THE PLAYER ONLY LIST, NOT ON THE WHOLE COMPUTER LIST - click 'delete' button on your keyboard

May 30, 2008 | iLO MP3 Player

2 Answers

Ilo 1GB 3.101.103 MP3 Player = MTP Device?


Uninstall MTP Device in System --> Hardware --> Device Manager

May 18, 2008 | iLO MP3 Player

1 Answer

Mp3 player severe help


There are two ways to format an Mp3 player - one on the computer itself, and one in Windows Media Player. Both methods will end up erasing all the songs on the player, but the player will be "good as new" after that. Sometimes reformatting in this manner will override the player's native formatting and cause problems - this can be reversed in most cases by updating the player's firmware. Firmware upgrades are available from most manufacturers' websites.

WARNING: The following procedures will erase all songs on the player.

Check if the file system is NTFS. If yes, format it to FAT or FAT32. - Connect player to computer, double-click my computer, right click on icon of mp3 player and select format. This only applies to Windows-based computers.
You can also format the player in Windows Media Player itself:
Connect your Mp3 player to the computer and open Windows Media Player. Click on the Sync tab. Pull down the drop down menu underneath the Sync tab by moving your cursor over the Sync tab and left clicking on the little black arrow underneath the Sync tab. Highlight "name of Mp3 player here 1GB" (wording may vary slightly), and then select "Format." - this should erase everything.
-Tha Mp3 Doctor

Mar 09, 2008 | iLO MP3 Player

1 Answer

2GB SD Card Problem.


you cant expect all mp3 players to play as many songs as u wnt. each mp3 player has a limit of memory card that needs to be attached. see whats the maximum memory your mp3 player can support. and also see if you can locate all the songs when the SD card is connected to your computer

Jan 29, 2008 | iLO MP3 Player

2 Answers

My ilo MP3 player needs help


when i turn it on it stays on the ilo logo sreen and just blinks

Jan 23, 2008 | iLO (2 GB) MP3 Player

1 Answer

Ilo 1gb mp3 player


install the ilo driver cd that came with your ilo. Because you never know, not all ilo mp3 players have the same software.

Thats just my opinion, hopefully it works

Dec 30, 2007 | iLO MP3 Player

1 Answer

Mp3 player won't play


your ILO has somehow lost its file structure. look for a tiny pinhole to reset the device. if none, then remove batteries to attempt reset. if still no songs, then firmware upgrade if possible or copy file structure (using windows) from a friend's ILO.

Jun 08, 2007 | iLO (2 GB) MP3 Player

Not finding what you are looking for?
iLO (2 GB) MP3 Player Logo

Related Topics:

90 people viewed this question

Ask a Question

Usually answered in minutes!

Top iLO Audio Players & Recorders Experts

Mohamed Ismail
Mohamed Ismail

Level 3 Expert

462 Answers

Allen Benge

Level 1 Expert

3 Answers

Michael Vincent Cruz

Level 3 Expert

868 Answers

Are you an iLO Audio Player and Recorder Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...