Question about HP PSC 1510v All-In-One InkJet Printer

2 Answers

Gone a week. Now my HP PSC1510v won't power up.

There was no power failure or anything. I am running a PowerMac G5 with OS 10.4. I cannot even get a green light. No sign of trouble before I went on vacation either.

Posted by on

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Expert
  • 177 Answers

Ello and welcome to Fixya!,

It may have overloaded or something has burnt out on it!

Contact HP and get replacements for it. It sounds like the Power Board has Died!

Hope This Helps --P3NGYJ03

Posted on Dec 31, 2008

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 140 Answers

Unplug the power cord and try a different outlet. Let's hope it's something simple. Good luck.

Posted on Dec 31, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Sharpener pro 2 0


You can use a PowerMac G5 running Mac OS X 10.5.

Jul 23, 2013 | Computers & Internet

1 Answer

How to get to BIOS on Apple Powermac G5


There is no Bios on Mac OS, but there is Open Firmware on Macs.You can get into OpenFirmware using this key sequence:
CMD-OPT-O-F

Apr 26, 2012 | Apple Power Mac G5 Desktop

1 Answer

Video jitter on youtube on power pc


Try using the browser Google Chrome, it has flash built in and it is a bit faster.
If this doesn't work, you'll have to kill some programs to get more processing power. Press and hold the command key, and then tap tab while still holding command to cycle through your running programs. Let go to stop on one you kill, and then press Command + q to kill it. Do this with as many programs as you can to get better performance, you can always start them up again later.
If none of this works, you may need to upgrade your graphics card...sorry.

Apr 14, 2012 | Apple PowerMac G5 Dual Mac Desktop

1 Answer

My PowerMac G5 won't recognize the monitor that goes with it


check your video cable ends for bent pins or debris, then make certain that they are plugged in straight and tight.

Mar 06, 2012 | Apple Power Mac G5 Desktop

1 Answer

PowerMac G5 with dual 2.7 processors powers on but no video


There are seven diagnostic LEDs near the memory banks of this model: six in a tight line between the edge of the logic board and DIMM bank 1, and the seventh just underneath DIMM bank 1 and slightly more inboard. Please tell me which of these LEDs are on and I will tell you what they mean.

Sep 25, 2009 | Apple Power Mac G5 Desktop

2 Answers

PowerMac G5 fan keeps running -- LOUDLY


I had the same problem... It is the logic board... You need to get it replaced. One way you could try to fix it by resetting the board there should be a little black dot behind the front two fans when you open it up. Press and hold for a few seconds... this resets the board to factory settings. The other way is replace the internal battery. and the third is to replace the logic board. $150-200

Jun 04, 2009 | Apple PowerMac G5 Dual Mac Desktop

1 Answer

How to replace the power supply on a powermac G5


I would be very cautious doing this, if you are not an Apple tech. You can damage the connector for the G5 Processors, and render the machine un-usable.

You have to remove the RAM and Processor, then remove the two power connectors that connect from the power supply to the logic board. On the bottom, underside of the chassis, there are four screws. Remove them, then you can tilt the power supply out of the bottom of the unit.

Replacement, is just the reverse.

Apr 17, 2009 | Apple Power Mac G5

1 Answer

Power Supply blew up, need to replace


Hi, Sorry to hear you are having problems,
Here is a very useful website:
http://g5.bhmm.net/
it will show you how to take apart a Powermac G5 step by step.

Mar 16, 2009 | Apple PowerMac G5 Dual Mac Desktop

Not finding what you are looking for?
HP PSC 1510v All-In-One InkJet Printer Logo

Related Topics:

15 people viewed this question

Ask a Question

Usually answered in minutes!

Top HP Office Equipment & Supplies Experts

Seeker5211
Seeker5211

Level 3 Expert

1089 Answers

kakima

Level 3 Expert

101554 Answers

mukhtar21 shaikh
mukhtar21 shaikh

Level 3 Expert

2017 Answers

Are you a HP Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...