Question about HP ProCurve 2626 (J4900B) 24x10/100 Mbps Networking Switch

1 Answer

How to assign IP address to HP procurve1800 switch?

I want to know how to assign ip address to hp procurve1800 switch, as well as i want to know how to take remote desktop access of switch to configure ip address , is anybody their to help me ?

Posted by on

  • meerakbarali Jan 01, 2009

    thanks for providing information about HP procurve switch



    iam having another problem ,How to assign host name and password for new switch of Dlink 24 ports ,



    how to assign password to FTP? if the server password expires we have to set in FTP also how to change it?

  • Mohammed Rizwan
    Mohammed Rizwan May 11, 2010

    Connect the Switch Console port to the PC Ethernet Jack
    Access it via hyper terminal
    Once you get the hyper terminal screen, type the following commands one after the other

    configure terminal
    interface fastethernet 0/1
    encapsulation data 1Q 2
    ip address xxx.xxx.xxx.xxx
    exit


    If you any doubts or need further clarification, reply back

    Thanks
    Riz



×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

The 1800 series do not have CLI so you should connect directly to any RJ-45 port.

I quote from the installation guide:
"In the factory default configuration, the default IP (Internet Protocol) address of the switch is 192.168.2.10 and the subnet mask is 255.255.255.0"

So set your PC IP address in the same subnet and access it through your web browser. If it has not the default configuration, interconnect the switch ports 1 and 2 and reboot it.

Hope this helps,

take care

AFO

Posted on May 14, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Where is the IP address for Photoshop C3180


The HP Photosmart C3180 printer does not have wired or wireless network capability. It can only be installed via USB connection. There is no IP address that can be assigned as it is not a network printer.

Feb 07, 2016 | HP Office Equipment & Supplies

4 Answers

IP address for HP deskjet f380 all in one printer


HP Deskjet F380 Printer: Trying to connect printer to phone with an IP address:

Hello. The HP Deskjet F380 is not a wireless printer.

Others online have been successful connecting this particular printer to their Android device using an OTG cable:

ip-address-hp-deskjet-f380-all-in-one-kyzl0pi20tqzz121bvlihxv0-5-0.jpg
..However, the HP Deskjet F380 is not compatible with the Android Printing feature as noted by HP Support here (for Android OS Kitkat and above):
HP Printers Mobile Printing in Android Kitkat Using the Android Print...

If you try to connect this HP Deskjet F380 to a Windows phone it is also not compatible.

Reference Links

HP Print Service Plugin Android Apps on Google Play
HP Printers Mobile Printing Solutions Compatible with HP Printers
F380 printing from android device
HP Deskjet F380 all in one printer

.

Jan 21, 2016 | Samsung Cell Phones

1 Answer

What is the default ip address for hp 2510-24 j9019B switch ?


Switches don't have an address, think of them more like a traffic intersection with 24 roads.

When you plug a device into the switch, that device gets assigned an ip address.

For example:
  1. Phone line comes in to your house and stops at your modem, your modem is plugged into the switch. The modem picks up the private network address 192.168.0.0
  2. Your computer is plugged into the switch. It picks up ip 192.168.0.1
  3. Your friends computer is plugged into the switch. It picks up ip 192.168.0.2
This carries on until you have filled all the sockets on the switch.

The ip's here are only on your personal network, to find what your external ip (your modem -> internet) is just type 'whats my ip' in the google search and it will show you your public ip address.

Nov 24, 2015 | HEWLETT-PACKARD Hewlett Packard HP...

1 Answer

How to assign ip address to hp 1400 switch?


no need of ip address....download driver software in hp website and install...automatically ip will be assigned

Aug 20, 2014 | HP PSC 1401 All-In-One Printer

1 Answer

Jetdirect ex default ip


Usually it it set to pick up IP from DHCP/BootP.
If someone had assigned a fixed IP and it is now unknown. It is better to reset the print server to factory default by pushing the little reset button,
Then check you DHCP server for the newly assigned IP address.

You will need a version of HP Jetadmin or HP webjetadmin to configure this print server

May 13, 2014 | HP JetDirect EX Plus Print Server

1 Answer

How the put static ip in my swictch HP J9078A? is default ip for J9078A? tks


the 1400 is not a manageable switch. Meaning that you can't assign an IP address to it.

Nov 29, 2010 | HP ProCurve 1400-24G (J9078A)

1 Answer

How can i assign IP address and other require parameters on HP LaserJet 2420dn printer ? I want to run this printer as print server using Ethernet (network) cable. Please reply me. My email :...


First install the printer driver on your computer and then change the printer port to IP port with the printer's IP address.
The printer's IP address is assigned from the printer's menu Network setup.
Please click on this link and follow my instructions.
http://www.fixya.com/support/r3559242-setting_up_hp_jetdirect_print_server_p

Aug 11, 2010 | HP LaserJet 2420 Printer

1 Answer

I need to change the IP address on my hp color laser jet 2840 coud you help me with that


Hi,
Most HP printers can be reset to factory defaults (or cold-reset ) by turning the printer off and holding down the Online or Go button while turning the printer back on. The printer control panel display should read "Cold Reset" or "Restoring Factory Settings" or something like these lines. This will remove any IP address that the printer had previously.
When you plug it in, your router should have assigned an ip address automatically. Go into your router and look at the attached devices and it will show you what ip address has been assigned to each device on your network.

Use Web Interface or Manually Assign an IP address NOTE: Network HP Printers allow you to manage them via Internet Explorer. You can enter the IP address that the printer currently has and access its configuration settings. This assumes that the web interface hasn't been locked.
NOTE: We recommend that you install the latest version of Sun's Java software before trying these steps. See this How To: How to Update Sun's Java 2 Runtime Environment Plug-in.
  1. Print the Configuration page if needed. You will be entering the "current" IP Address.
  2. Open Internet Explorer. Delete EVERYTHING from the Address line.
  3. Enter the IP Address in the Address line and press Enter.
  4. You should then connect to the printer. If this fail, go to the next section to assign the IP address manually.

    NOTE: There are 2 basics versions of the web interface. Type 1 is on newer printers. Type 2 is on older models

  5. Type 1: Click the Networking tab.
    Type 2: Click the Administration button. Click the Configuration tab.

  6. Edit the IP address, Subnet Mask, and Gateway as needed.
  7. Do not change any other fields.
  8. Scroll to the bottom and click Apply. Click OK.
  9. Close Internet Explorer.
  10. Restart the Printer. Print the Configuration page to see if number was set.
NOTE: If the above steps do not allow you to assign the IP address via the Wizard, you will need to do it through at the printer itself.
  1. Go to this HP Support Page.

    Configuring TCP/IP through the Front Control Panel

  2. Click the link to your printer model. Highlight these steps.
  3. From the File menu choose Print. In the Page Range section, click Selection. Click Print.

    Note: For the complete printer user guide, go to the HP Printers Support & Troubleshooting page. Locate your specific printer type and model. On its home page, under self-help resources, click the manuals link. Download the printer's User Guide (not the Getting Started Guide). Look for steps to manually configure TCP/IP parameters from the printer control panel.

  4. Follow the steps from the printout to assign the desired IP Address to the printer.

    IP address will be entered at the IP BYTE prompt
    Subnet mask is entered at SM BYTE prompt
    Gateway address is entered at GW BYTE prompt

    Note: The syslog server IP address (LG BYTE 1=) and timeout (TIMEOUT=) do not need configured.

  5. Once the IP Address is entered, restart the Printer. Print the Configuration page to see if number was set.

Hope this helps

Chris (ziraffa)

Jan 09, 2009 | HP LaserJet 2840 Printer

2 Answers

HP JetDirect IP Address


how to assign the IP address to Hp color laserjet 2550Ln printer?

May 10, 2008 | HP LaserJet 2550Ln Printer

1 Answer

Help with hub Procurve Hp j3294a


These are non-manageable switches, not configurable thus no IP. You should be able to plug it in to your home wiring, however, if you don?t have a server or dhcp server you will have to assign IP addresses to your computers and other network devices manually.

Dec 14, 2006 | HP ProCurve (J3294A) 12x10/100 Mbps...

Not finding what you are looking for?
HP ProCurve 2626 (J4900B) 24x10/100 Mbps Networking Switch Logo

2,729 people viewed this question

Ask a Question

Usually answered in minutes!

Top HP Computers & Internet Experts

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18375 Answers

Tony

Level 3 Expert

2598 Answers

Are you a HP Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...