Question about Kodak EASYSHARE 5100 All-In-One Printer

1 Answer

Can't load the Kodak AiO Homecenter software

I just reloaded the original Kodak software for my 5100 multifunction printer. It loaded EasyShare software but did not load the AiO Homecenter Software to control scanning, etc.

Any ideas???

Thanks, Andy

Posted by on

  • 1 more comment 
  • Anonymous Feb 08, 2009

    I have the same problem, I have windows vista. I have uninstaled and installed again, and it still does not work.AIO home center will not open when right click on the printer icon, and cant find anywhere else.I have went to kodak and done what they said to do going into regedit area.The software for aio home center did not install.Got an ideas thanks david

  • wendi-anne Feb 08, 2009

    I am using windows Vista, Home centre loads initially and everything works ok. Then the next time I try to use it, if my pc has been shut down it wont load again. I have now reinstalled the drivers 4 times, same problem every time, it stops working after I shut the pc down. I have also tried the option of repairing installation from the start up disc but this causes exactly the same problem.

  • Anonymous Feb 15, 2009

    kodak ESP-9 All in one printer

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 2,976 Answers

Go to the control panel and uninstall it. Don't just delete the program from windows explorer. Reinstall everything. It SHOULD work fine.

Posted on Jan 01, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

The Kodak AiO Home Center won't fully load. It


To perform a clean installation of the KODAK All-in-One Printer Home Center Software:

  1. If a USB 2.0 cable is connected to your printer, disconnect it.
    IMPORTANT: Do not reconnect the USB 2.0 cable until instructed to do so during installation of the software.

  2. Install the KODAK All-in-One Printer Software, either from CD, if you have the latest version of software, or by downloading from the Kodak Web site, www.kodak.com/go/aiodownloads, free of charge.

Apr 08, 2009 | Kodak EasyShare C613 Digital Camera

1 Answer

Just need to load 3.3 software i have the 1.2


Here is the page to download the software.

Kodak 5100 AIO Download

If you need more help, coment back.

Thanks for using Fixya.

Feb 21, 2009 | Kodak EASYSHARE 5100 All-In-One Printer

1 Answer

Software kodak printer


Hello C_Lopez,

To install that software you need the Kodak AIO Home Center Software which is found on the Yellow CD along with the package of the printer you bought...

I hope it will solve your problem...

Nov 09, 2008 | Kodak EASYSHARE 5100 All-In-One Printer

1 Answer

Video display with Kodak AiO Home Center


Make sure that your screen resolution is 1024x768

Jun 27, 2008 | Kodak EASYSHARE 5500 All-In-One InkJet...

9 Answers

Will not scan kodak easyshare 5100


Go to Control Panel
Double Click on Printers and Other Hardware
Double Click on Scanners and Cameras
Double Click on Kodak 5100 AiO
Click Next
Read and follow directions
It ain't rocket science

Feb 08, 2008 | Kodak EASYSHARE 5500 All-In-One InkJet...

5 Answers

Home Center will not open...Can't scan


I needed to reload my AiO Home Center software and no one seemed to have the correct procedure. Maybe if you remove & reinstall yours it will resolve your problem. This procedure worked for me on my XP-machine:
1. got to Control Panel/Printers&Faxes and delete the printer
2. go to your Hardware/Device Manager/Universal Serial Bus Controllers, right-click on USB Composite Device and select Uninstall
3. go to Control Panel/Add/Remove Software and remove the EasyShare software
4. disconnect the cables from the Printer
5. download from Kodak.com the program "install_aio.exe"; run the program
(I selected only AiO+EasyShare+Software Updater to load)
6. followed the prompts after the sw installed to reconnect the Printer cables
7. rebooted

WORKED for ME !

Jan 13, 2008 | Kodak EASYSHARE 5300 All-In-One InkJet...

Not finding what you are looking for?
Kodak EASYSHARE 5100 All-In-One Printer Logo

Related Topics:

685 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kodak Office Equipment & Supplies Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18375 Answers

Sajid Najmi
Sajid Najmi

Level 1 Expert

31 Answers

Cindy Wells

Level 3 Expert

4916 Answers

Are you a Kodak Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...