Question about Disney 13" TV

4 Answers

Dish network remote code for Disney 13" TV

I need to program the dish network code to the Disney tv and when I called Dish Network their one code did not work so they told me to call Disney

Posted by on

4 Answers

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 2 Answers

On your dish remote, press and hold the tv button until all 4 buttons light up, then release. push either of the power buttons once. Now start pushing the down channel button, It's the one right below select, continue pushing it until tv turns off. When tv goes off push down button one more time then push up button, when tv turns back on stop and press # key, tv light will flash 3 times and should be set. Note....if u press down button and tv does not turn off after going through all codes( tv light will start flashing) press cancel and try again only channel up this time. hope this helps.

Posted on Mar 09, 2009

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 2 Answers

Try echostar\dishnetwork code 759. This is listed in the echostar 6.2 and 6.3 remote manuals as a TV code for Hisense.

Unfortunately this code is not in the 6.0 remote. I have the same TV and verified code 759 operates the television with a 6.3 remote.

Posted on Mar 15, 2009

  • Jacque Walker
    Jacque Walker May 27, 2015

    This code worked for me for the 3.4 & 4.4 UHF Pro....thanks!

×

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 2 Answers

I lost remote i need a code and brand to set a universal remote

Posted on Dec 20, 2009

  • Level 1:

    An expert who has achieved level 1.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 2 Answers

The dish network code for a pink 13" disney princess tv is 720 using a uhf pro tv2 remote control. (and also for the tv1 ir remote)

Posted on Dec 24, 2011

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

3 Answers

Does anyone know the remote code for a sanyo tv model dp42647 on a dishnetwork remote


Remote Codes ' MyDISH ' DISH Customer Support

https://www.mydish.com/support/remotecodes
Remote Control Manuals · Program Remote to TV/Other .... remote, product type, and manufacturer below to see the current known remote codes you should try.

My Dish remote needs programming for Sanyo TV ... - Directly

https://www.directly.com/.../dish-network-my-dish-remote-needs-progra...
My Dish remote needs programming for Sanyo TV, Model DP226649. My Dish ... Needcode. Alta asked this ... Dish Network • 16808 answers • 95% helpful. Code is ... Test volume control, if it works you're set ... try 590 it should work. tivosat.

How do I program my dish remote to work for my Sanyo TV.

https://www.directly.com/.../dish-network-how-do-i-program-my-dish-re...
Dish Network. How do I program my dish remote to work for my Sanyo TV. ... entercode 590 press pound then sat Then try to turn tv on and off then try volume.

How do you program a dish network remote to my sanyo tv? ' Ya


Jan 09, 2012 | Sanyo 42 in. LCD TV

1 Answer

NEED A CODE TO PROGRAM DISH NETWORK 5.4IR REMOTE TO OPERATE PHILIPS HTS3565D


Hello! My name is Becki, with DISH Network. Programming the remote to the TV is a pretty easy process. I have given some codes that should work to program the remote. If not, please let me know!

1. Hold down the clear TV button until all lights light up at the top of the remote
2. Punch in a 3 digit code (provided below)
3. Press the # (POUND) button
4. Try powering the tv on/off, and the volume. If one or more of these functions do not work, start over from step 1 with a different code

566
828
824

Becki Barned
DISH Network Customer Service
becki.barned@dishnetwork.com

Jul 13, 2011 | DISH Network IR Remote Control

1 Answer

Programme remote to work with sony tv


To program your DISH Network remote to your Sony TV you will simply- press and hold the TV Mode button until all the other mode button back lights illuminate, then release.

-Now while the TV mode button is blinking please enter in the remote code 500 which is the remote code for your Sony TV after entering 500 then press the pound (#) key.

-After pressing the # key on the DISH Network remote, the TV mode button should blink 3 times and then turn off completely. This will mean the programming of the DISH remote to your TV has been completed successfully. While still in TV mode try any of the functions on the remote, such as turning the volume up or down on your TV or attempting to press the power button.

-The DISH Network remote should now be programmed to control your TV.

-If the remote code 500 doesn't program the DISH Network remote successfully you can also try each of the following using the same procedures, 000, 590, 640, 502, 002, or 567.

I hope this resolved the issue for you! Please feel free to contact us if you need any additional assistance.
-Kirstie DISH Network

Sep 16, 2010 | DISH Network IR Remote Control

1 Answer

My dish network control doesnt work even the volume button it only stays on sat and stays blinking red


If you want it to control the volume of your tv you must program it. You need to get the code for your tv to do this. You can call tech support at dish network.

Jun 26, 2010 | DISH Network IR Remote Control

1 Answer

Dish network remote to run RCA DVD player


I had rca remote that did not recieve ir signals but rf signals instead. Check online with rca or in owners manual for what type of signal factory remote sends. The dvd player I had was 5 dvd and that was the case. Dish might have an option like direct tv where you can program rf signals as well. Call dish network support or look online

Apr 25, 2010 | DISH Network IR Remote Control

1 Answer

Cant program my emerson flay screen tv wiyh dish


Hi tbombertigermy name is Mike Houston of DISH Network and I was going over your post and Isee where your Emerson TV needs to be programmed to your DISH Network remote. Ihave the codes 569, 632, 505, 516 and 004. What you will want to do is holddown the clear TV button for 6 seconds and then press in the three digit codeand the # button. If these keys don't work we do have a step called Power Scanand I will send the link to help with the setup. http://www.dishnetwork.com/SupportSection/power-scan-instructions

Jan 06, 2010 | DISH Network IR Remote Control

2 Answers

Programing Dish Network Remote to control a Vizio Tv.


Try 627 for Vizio TVs - that should work on the Dish remote.

Dec 22, 2008 | DISH Network IR Remote Control

1 Answer

Dish network remote with a element tv


Since you dont have a popular brand set you should try using the scan method. Here is a link with a video to help program your dishnetwork remote to work with your set. http://www.disheez.com/videos/dish-network-video/programming-dish-network-remote/

Nov 23, 2008 | DISH Network IR Remote Control

2 Answers

Code for trutech


dish network remotes dont work with very many tv/vcr or tv/dvd combo units

Jul 11, 2008 | DISH Network IR Remote Control

Not finding what you are looking for?
Disney 13" TV Logo

1,882 people viewed this question

Ask a Question

Usually answered in minutes!

Top Disney Televison & Video Experts

The Knight
The Knight

Level 3 Expert

73474 Answers

Jaime Hernandez

Level 3 Expert

2311 Answers

Chris Goulet

Level 2 Expert

41 Answers

Are you a Disney Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...