Question about Avaya Partner ACS 308EC (108463001) Expansion Module

1 Answer

On a AT&T Partner R4.1 calls, Recv rotary ring xtalk on other cal

I get crossover ringing while on incomming calls occur on other lines of the system. Had D' marked checked from vendor, had the risers checked from the riser vendor. Changed out whole phone system and problem still exists? any clues?

Posted by on

1 Answer

So, when line 1 rings in, it makes line and line 2 ring? If so, the riser vendor is a ****. The line is double punched. Call in a good vendor to hit them..

Posted on Jan 13, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I turn the ringer off at my phone for external incoming calls?


Go into the extension programming and change the line settings to no ring. It is best done if you have a display phone so you can see the changes. If not, then you will need to look at the flashing line lights when you enter the programming mode.

Press Feature 00. This will take you into the programming mode. You should see the line buttons lit up green. They will be Solid (Immediate Ring) or Slow Flash (Delayed Ring) or Fast Flash (No Ring). I assume yours is solid so push each line button until it changes to a fast flash. Once done press Feature 00 to exit the system and save the settings.

Sep 11, 2014 | Avaya Lands Phones

1 Answer

Incoming calls do not ring


Is the line ringing turned off? A quick check is to press Feature 00 from any extension and look at the line lights. If they flash fast then the ringing is turned off. To restore ringing press the line button until the light turns solid. Then press Feature 00 to save and exit.

Aug 26, 2014 | Avaya Partner 18 Eurostyle 18D telephone

1 Answer

Why won't replica rotary dial phone works well but won't ring on incoming calls


Whats a rotary phone? J/k we're not that old yet.

Because phone systems are no longer analong. The way a rotary rings is by an increase in line voltage.

Aug 08, 2014 | Toscano Design Pay Phone Pop Rotary Dial...

1 Answer

How do I reprogram the phone to ring when a new call comes in, default to a certain line, and show caller id when a call comes in.


The answer to the Caller ID question:
Depend on the type of system that the phone is connected to. Late model Partner ACS equipment will display Caller ID info between the first and second rings, provided that the telephone line is plugged into a module that supports Caller ID.

The answers for the other 2 questions are taken directly out of the Partner ACS Programming Guide which is available for free download at Avaya's website.

Ther answer to the incoming call line ringing question:
Again, depends on the system. For the Partner ACS:

1) Press FEATURE 00 at extension 10 or 11.
2) Enter the number of the extension to be programmed for Line Ringing.

The green lights next to the line or pool buttons show the current Line Ringing settings for all

lines or pools assigned to the extension. (If a line or pool is not assigned to a button, the green

light next to that button is off.) The following ringing options can be shown by the green light

next to the line or pool button:

? Immediate Ring - on steady

? Delayed Ring - flashes slowly
? No Ring - flutters quickly

3) Press the line or pool button until the button light shows the correct setting (the setting for the
currently selected line or pool also appears on the display).
4) Continue programming, or exit programming mode.

Line selection:

For incoming calls, the line selection (hunt sequence) is set by the local service provider). For outgoing calls....again....it depends on the system. For the Partner ACS:

1) Press FEAURE 00, SYSTEM PROG, SYSTEM PROG, CENTRAL PROG at extension 10 or 11.
2) Enter the number of the extension to be programmed for Automatic Line Selection.
3) Press **.
4) Press the line, pool, or INTERCOM buttons in the desired order. The valid entries for Automatic
Line Selection
depend upon the type of extension:

? Key Extension: Outside system lines, Left Intercom (the factory setting)

? Pooled Extension: Pool 880 button 1, button 2, Left Intercom, Right Intercom (the factory

setting), Pools 881-883, individual lines


For each button pressed, a display similar to the following appears:

Automatic Line Selection


5) To exit Automatic Line Selection, press **.
6) Press CENTRAL PROG and enter a new extension number, or exit programming mode.

Changing line ringing and line selection are tasks that are normally reserved for the Administrator of the telephone system.

Jan 06, 2011 | Lucent 18D Corded Phone

2 Answers

How do I set phone to ring at my extention?


Partner, all releases.
Examples
Receptionist Call Routing. If you want calls to be answered by the receptionist first, set the lines at the receptionist’s extension to Immediate Ring and the lines at the users’ extensions to No Ring. (This is the factory setting)
Receptionist Backup. If you want all calls on a line to ring directly at users’ extensions -with the receptionist providing backup -set the line at the users’ extensions to Immediate Ring. Then set the line (or lines) at the receptionist’s extension to Delayed Ring. An incoming call that is not answered by a user within 20 seconds will also ring at the receptionist’s extension.
Programming
To change the way outside lines or pools ring at an extension:
  1. Press [ Feature ] [ 0 ] [ 0 ] [ System Program ] [ System Program ] [ Central Tel Program ].
  2. Enter the number of the extension to be programmed for Line Ringing. The green lights next to the line or pool buttons on the phone show the current Line Ringing settings for all lines assigned to the extension. (If a line is not assigned to a button, the green light next to the button is off.) The following ringing options can be shown by the green light next to the line button.
    • Immediate Ring - on steady
    • Delayed Ring - flashes slowly
    • No Ring - flutters quickly
  3. To change Line Ringing for any line, press the line or pool button until the button light shows the correct setting (the setting for the currently selected line or pool also appears on the display).
  4. Continue programming or exit programming mode.

Dec 01, 2009 | AT&T Lucent MLS-12D Phone

1 Answer

Since power outage phone lines do not ring - only to receptionist


Your system lost its programming. It will need to be reprogrammed completely. The lines are ringing on the extensions where I voicemail is, unplug voicemail and at least lines will ring in correctly.

Jun 15, 2009 | Avaya Lands Phones

1 Answer

Stop ringing at main phones when outside calls come in.


Here is a link to program line ringing.

It sounds like your extension is forwarded (confirmed by the one beep you hear on an incoming call.

From any display phone, press Feature 11
then enter your extension number 2 times. So if you are extension 20, do this:
Feature11-20-20
see if that does it.

May 28, 2009 | Lucent PARTNER18 Corded Phone

1 Answer

Stop ringing at certian phones when outside calls come in.


http://dstech1.com/programming-line-ringing/


Partner, all releases.
Examples
Receptionist Call Routing. If you want calls to be answered by the receptionist first, set the lines at the receptionist's extension to Immediate Ring and the lines at the users' extensions to No Ring. (This is the factory setting)
Receptionist Backup. If you want all calls on a line to ring directly at users' extensions -with the receptionist providing backup -set the line at the users' extensions to Immediate Ring. Then set the line (or lines) at the receptionist's extension to Delayed Ring. An incoming call that is not answered by a user within 20 seconds will also ring at the receptionist's extension.
Programming
To change the way outside lines or pools ring at an extension:
  1. Press [ Feature ] [ 0 ] [ 0 ] [ System Program ] [ System Program ] [ Central Tel Program ].
  2. Enter the number of the extension to be programmed for Line Ringing. The green lights next to the line or pool buttons on the phone show the current Line Ringing settings for all lines assigned to the extension. (If a line is not assigned to a button, the green light next to the button is off.) The following ringing options can be shown by the green light next to the line button.
    • Immediate Ring - on steady
    • Delayed Ring - flashes slowly
    • No Ring - flutters quickly
  3. To change Line Ringing for any line, press the line or pool button until the button light shows the correct setting (the setting for the currently selected line or pool also appears on the display).
  4. Continue programming or exit programming mode.

Jan 09, 2009 | Lucent PARTNER18 Corded Phone

1 Answer

Change number of rings on incoming call before it goes to VMS


Changing the vms hunt delay on a Partner ACS system is done on either ext 10 or 11. At one of those ext's press the feature key and "00"
next press the left hand intercom twice
the display should say system programming
enter in "#505"
the display should say vms hunt delayand mode:
enter 1 for day mode or 2 for night mode
enter line you want to program in 2 digit format (line 1 =01)
enter number of rings (2)
press feature "00" to logout
hope that helps

Jan 05, 2009 | Comdial Avaya Partner ACS Phone

1 Answer

Incoming calls to office cause all phones to ring in classrooms


Changing ringing on a Partner system is done on either ext 10 or 11.
At one of those ext's press the feature key and "00"
Next press the left hand intercom twice
The display should say system programming

Press the right hand intercom once. The display should say Centralized Programming.

Enter in the extension number that you want to program.

Press the line that you want to ring.
A solid light on the line means immediate ringing
A slow flashing light means delayed ringing (meaning the phone will wait 3 rings before starting to ring.)
A fast flashing light means no ringing.

When finished with that station press the right hand intercom and enter in the next extension to program and set ringing accordingly.


Press feature "00" to logout
Hope that helps

Dec 02, 2008 | Lucent PARTNER18 Corded Phone

Not finding what you are looking for?
Avaya Partner ACS 308EC (108463001) Expansion Module Logo

Related Topics:

101 people viewed this question

Ask a Question

Usually answered in minutes!

Top Avaya Computers & Internet Experts

Brad Brown

Level 3 Expert

15133 Answers

David Payne
David Payne

Level 3 Expert

14161 Answers

kakima

Level 3 Expert

102366 Answers

Are you an Avaya Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...