Question about HP Officejet 5610 All-In-One InkJet Printer

1 Answer

Lost 'Destinations.msi' In the process of removing a user account and establishing a new one, I find I cannot use the networking at all--either as wireless or with an ethernet connection. When I log on in either the old or the new user account, all I get is a message that says I need to reinstall Destinations.msi from a disk. I'm stumped. This is a Toshiba Staellite U205 that came as Vista -ready. I installed Vista from the disk they sent three months later and have had noting but trouble. I can't go back to XP and If I put the XP recovery disks in, I get a message that tells me it is not an XP system. Any assistance would be appreciated. Thanks, htheninth

Posted by on

  • haegertson Dec 30, 2008

    Thank you! This is proof that I am out past what I know. I had no idea msi was a piece of the equipment/software--I thought is was a file type. I'm going to play around with the downloads from their site and see what I can do. I did completely and successfully reformat the hard drive on a netbook a few weeks ago, but am a bit less sure of myself with this one becasue of all the cross Vista issues. It may come to that, but because everything else seems to be working just fine, I will try your suggestions first. I really appreciate this and will work on getting past my embarrassment for my oblivion.
    htheninth

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 2,692 Answers

Since you have the recovery disks you may reformat the hard drive and reinstall windows Xp.  You can reformat the hard drive with some free software that can usually download from the manufactor of you hard drive. Yuor hard drive is listed under   MY computer(right click) - properties-hardware . The other option is to go to the MSI website and see if they have special software for *********** board for VISTA for the:" Destinations.msi"  

http://www.msicomputer.com/support/TechSupport.asp

Posted on Dec 30, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Create new yahoo account. My previous account has been stolen and given a new password, which I don't know. The thieves now have control of my email account. I need to establish a new account.


to get it back try putting in your user id and then click on forgot password
when you get permission to reset your password put in a completely new password, reenter it and you have your account back
I then suggest that you change your user id as well by the forgot process
if that doesn't work contact the yahoo administrator and ask how it can be done

Jul 12, 2016 | Yahoo Mail

1 Answer

I need to create a "System Password" to the system. The BIOS only allows to create a password for the "BIOS". That is not the password I want to create. When the system boots up I would...


hare are a number of password changes that can be made
click start control panel Open User Accounts in Control Panel. On the Users tab, click the name of the user whose password you want to change, and then click Reset Password. In New password and Confirm new password, type the new password, and then click OK. Notes You can change passwords only for local computer accounts, such as guest, administrator, or accounts you create for your computer. You cannot change your network logon password in User Accounts. To change your own password, press CTRL ALT DELETE and then click Change Password
also
if you are not the computer administrator and have not assigned a bios password during the boot up process you will see on the screen for a short amount of time press a certain key to enter set up Press and hold that key during the boot up process to enter BIOS scroll down to set user password or supervisor password you can add change or remove your password from there also click start control panel user accounts on the users tab,click the name of the computer administrator you must have full control can change the password there

hope this helps you

Aug 18, 2011 | MSI K9N6PGM2V2 Motherboard w AMD Athlon II...

4 Answers

I am wanting to reset the system password on my dell computer


click start control panel Open User Accounts in Control Panel. On the Users tab, click the name of the user whose password you want to change, and then click Reset Password. In New password and Confirm new password, type the new password, and then click OK. Notes You can change passwords only for local computer accounts, such as guest, administrator, or accounts you create for your computer. You cannot change your network logon password in User Accounts. To change your own password, press CTRL ALT DELETE and then click Change Password also if you want set a BIOS password during the boot up process you will see on the screen for a short amount of time to press a certain key to enter set up Press and hold that key during the boot up process to enter BIOS scroll down to set user password or supervisor password you can change or remove your password from there also click start control panel user accounts on the users tab click the name of the computer administrator you can change the password there hope this helps you should make a note of any passwords and keep them separate to your computer incase of memory lapses

Aug 07, 2011 | Dell Computers & Internet

1 Answer

I am msi laptop passwords problem. pls help me for msi laptop cr-400 ms-1451..I want to password chang software ..pls help me...how to bios password chang


click start control panel Open User Accounts in Control Panel. On the Users tab, click the name of the user whose password you want to change, and then click Reset Password. In New password and Confirm new password, type the new password, and then click OK. Notes You can change passwords only for local computer accounts, such as guest, administrator, or accounts you create for your computer. You cannot change your network logon password in User Accounts. To change your own password, press CTRL ALT DELETE and then click Change Password also if you want set a BIOS password during the boot up process you will see on the screen for a short amount of time to press a certain key to enter set up Press and hold that key during the boot up process to enter BIOS scroll down to set user password or supervisor password you can change or remove your password from there also click start control panel user accounts on the users tab click the name of the computer administrator you can change the password there
you should make a note of any passwords and keep them separate to your computer incase of memory lapses
hope this helps you

Aug 04, 2011 | Intel Motherboard

3 Answers

I want to change my password


click start control panel Open User Accounts in Control Panel. On the Users tab, click the name of the user whose password you want to change, and then click Reset Password. In New password and Confirm new password, type the new password, and then click OK. Notes You can change passwords only for local computer accounts, such as guest, administrator, or accounts you create for your computer. You cannot change your network logon password in User Accounts. To change your own password, press CTRL ALT DELETE and then click Change Password also if you want set a BIOS password during the boot up process you will see on the screen for a short amount of time to press a certain key to enter set up Press and hold that key during the boot up process to enter BIOS scroll down to set user password or supervisor password you can change or remove your password from there also click start control panel user accounts on the users tab click the name of the computer administrator you can change the password there hope this helps you should make a note of any passwords and keep them separate to your computer incase of memory lapses

Aug 01, 2011 | Computers & Internet

2 Answers

How do i reset my security code?


what security code??if you are refering to change your security password

click start control panel Open User Accounts in Control Panel. On the Users tab, click the name of the user whose password you want to change, and then click Reset Password. In New password and Confirm new password, type the new password, and then click OK. Notes You can change passwords only for local computer accounts, such as guest, administrator, or accounts you create for your computer. You cannot change your network logon password in User Accounts. To change your own password, press CTRL ALT DELETE and then click Change Password
also
When you boot up to the log in screen type in administrator as user to log in if you cant log in during the boot up process you will see on the screen for a short amount of time press a certain key to enter set up Press and hold that key during the boot up process to enter BIOS scroll down to set user password or supervisor password you can change or remove your password from there also click start control panel user accounts on the users tab,click the name of the computer administrator you can change the password there

Hope this helps

Mar 30, 2011 | Computers & Internet

1 Answer

I need to erase a gmail account which a relative established 'on my behalf' and unwanted. i also wish to establish gmail of my choice' if possible gmail.ca.could someone speak to me by phone? Please!


Account establishment is attainable as an individual level only requiring the computer network structures to initiate the process. First a computer with internet connectivity makes available google display page at www.google.com. Second, gmail is the messanger service attainablel at the goolge network. Click instruction initiates process that would require credential personal details to establish an account. The electronic mails services on google apears as username.gmail .com where username is the members prefered credentails and gmail is the most mail service. Once estabslhied, an account is manipulated by the member. Also, prior member accounts usually are manipulted by the acount owner. Requesting to close the account requrire loging inot member spaces to initaite closure requests.

Feb 14, 2011 | Google Gmail

Not finding what you are looking for?
HP Officejet 5610 All-In-One InkJet Printer Logo

698 people viewed this question

Ask a Question

Usually answered in minutes!

Top HP Office Equipment & Supplies Experts

Seeker5211
Seeker5211

Level 3 Expert

1089 Answers

kakima

Level 3 Expert

102366 Answers

mukhtar21 shaikh
mukhtar21 shaikh

Level 3 Expert

2017 Answers

Are you a HP Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...