Question about Audio Players & Recorders

1 Answer

Hi there..any idea where I can find circuit/component/diagram for E&W HS3600 amplifier.looks like NZ factory of origin does not exist anymore as e-mail does not get is my e-mail to them that I tried to send: Please help!! Hi Al, Maybe an unusual request for your understanding and help but hope to receive soonest urgent and positive reaction from you. I bought a HS3600 Amplifier from a guy that previously had the contract to repair under guarantee electronic equipment for various importers in South Africa. It belonged to him and he was clearing stock at his home where he also have some sort of a workshop.I paid him to fix it. He repaired another amp for me and what a useless ******* he is..went back 3 times..cost me a fortune so far but bought this amp to try and solve my problem as the other one is not sufficient/big enough to do the job. Needless to say the HS3600 lasted for 4 gigs too. I am not prepared to return this amp to him for repairs as I was let down by his repairs on times I needed the amp the most. Neighbor friend is clued up with amps and electronics and the amp is there at the moment. According to him replaced components are not up to standard and some insufficient to handle the power. I am not clued-up with electronics but I am trying to get some help here Al. I understand that my friend is in need of a diagram/circuit of the amp with specifications on original components that must be fitted. Especially on the Power amp/power supply circuit board..does that make sense? He replaced a lot of components so far but still has a problem. Please help Al.. Thanks Dirk

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.


    An expert who has answered 1,000 questions.

  • Master
  • 1,175 Answers


From a websearch is seems E&W is in S. Korea

Maybe they can assist

Posted on Jan 08, 2009

1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

What's your question? what is the problem of amplifier wn no out pot soud?

Check and replace damaged component/s at its audio output stage circuit. Refer the circuit diagram, and do it. If you wish to get some details; check the site linked here. Pull up older posts. Surf the site with patience.
Circuit diagrams of many popular brand devices are given. Search the site by type in the "brand name" to your device, in the "Search box at the top right of the display window of the Homepage" to get gathered related posts.

Nov 10, 2015 | Audio Players & Recorders

2 Answers

Technics su-g75 amp goes to loud static after a few minutes

Hi Aawpharmd,

system control error.
please go for repair shop.

Jan 13, 2014 | Technics SU-G75 Amplifier

1 Answer

Rotel RA 12

I think RA 12 is not existing type, but RA 12xx types exist.
Please try this link, and I hope you will find the relevant documentation.
Good luck!

Mar 18, 2013 | Audio Players & Recorders

1 Answer

Protection circuit "ON" : no sound

Protection devices tend to come on when the power amp section has a problem. I would like to the devices on the heat sink to the cause.

Feb 24, 2013 | NAD C325BEE Amplifier

1 Answer

My Ashdown amps tweeter cone plastic screw on surround has broken and the amp is old now. It's a ABE 400 combo and I think the part is probably not in production anymore.......any ideas? Cheers

Either you can get a sutiable tweeter to be fitted which matches the size and fits correctly.
If the amplifier is good order it can be restored , if not as mostly the older generation has moved off it will be difficult to replace the board or components. You can fit in a newer version of a power amp board.

Jun 26, 2012 | Ashdown Audio Players & Recorders

1 Answer

I have just bought a used Sony Integrated amplifier TA- F210 and it didn't come with the owner's manual so I don't know the RMS wattage to enable me connect speakers with the appropriate wattage. Could...

Hi, I brought a Sony TA-F-210 new back in 1990 $ 650 NZ , and has been a very .. very good amp. Earthquake ruined it !! I still have the owners manuel and it says for UK and other countrys DIN, 1 kHz, 8 ohms . 70w + 70w . or . 20Hz-20kHz THD 0.05%, 8 ohms . 50w + 50w Hope this helps. Have been running big old 3 way 8 ohm 50w speakers for all its life and it grunts.. or did !! Nobody belived me I was running only 50w speakers !! I dont know what I will replace it with.. You will enjoy. Might look for another one ! Wayne.. NZ CHCH

Nov 26, 2010 | Audio Players & Recorders

2 Answers

I do not get any audio -unit is 3 yrs old-I can control my tv but no audio from any of my outputs-amplifier?

You are connecting everything correctly and it just has no output on any channel? I would say check and re-check all the wiring and if you still get no output despite giving it an input signal then the unit needs to be opened up and troubleshot. Without anymore info i can't offer you anymore help over the internet. You might wanna open it up and give the circuitry inside a good visual inspection. You might find open fuses, circuit board problems or toasted components, and be able to attempt a repair yourself.

Nov 15, 2010 | SpeakerCraft MZC-66 Amplifier

1 Answer

Krell 250a power amp

Hi There WLAW,
I am in Auckland NZ and do repair work for a high quality Amplifier chain so I could have a look at yours for you....

Being Local in Auckland it will save you sending it away off shore to Australia.

Cheers From YUBEUT (09) 357 7496

Dec 26, 2007 | Krell Home Theater Standard 7.1...

Not finding what you are looking for?
Audio Players & Recorders Logo

Related Topics:

164 people viewed this question

Ask a Question

Usually answered in minutes!

Top Audio Players & Recorders Experts


Level 3 Expert

100387 Answers


Level 3 Expert

4706 Answers

The Knight
The Knight

Level 3 Expert

71172 Answers

Are you an Audio Player and Recorder Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides