You have those newer earphones, the ones that actually go in your ear, the pods? No? Well dig this guy. They have more volume and monsterous bass! One player I have that I used to turn up to about 8 on it; I can hear at 1 with a set of cheap Sentry earpods I bought for $4.
Otherwise, it sounds like you might need a new rechargeable battery, or a better brand/ kind of disposible battery. If you use rechargeble batteries like AA or AAA, most have less power than regular disposible; 1.2 vs 1.5. You'll still want the earpods, serious.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
I had the same problem, and I was ready to take the player back. I was searching under media help and found the help I needed. This is what you need to do: open your media player. Along the top it will read Now playing, Library, Rip, Burn and then SYNC. Sync is what you need to click on. In the area that you would drag music to for a playlist will now have ' Connect A Device'. The rest should be easy to follow. Good Luck!
If you look on the left side of the e130, there is a slide switch. Slide that switch up, that is your hold switch. In order to get your player powered on, you have to have it out of the key hold function. Now after you get to playing the music you want to hear, then you can reactivate the key hold. However, this will disable you from turning the volume up or down, or skipping through the songs. In order to be able to do this, then simply turn off the key hold again by sliding it down. I hope this helps!
Try this: disconnect the player from the computer, turn it off,hold in the volume + button, and reconnect the player to the computer while holding the volume + button in. Keep holding the volume + button for an additional 5-50 seconds. Windows should eventually go into recovery mode and revive the player- it will pop up a window that says Found New Hardware Wizard.