Question about Lexmark X5470 All-In-One InkJet Printer

1 Answer

What usb cord do i need for my 5340 4 in 1 - Lexmark X5470 All-In-One InkJet Printer

Posted by on


1 Answer

  • Level 1:

    An expert who has achieved level 1.


    An expert that hasĀ over 10 points.


    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 15 Answers

Any USB printer cable will do, and what makes it work for a printer is how each end is shaped. These same cables work for many other devices as well, and are probably the most common USB cables, along with the mini cables used for digital cameras.

I'm posting a link to one on Amazon, only because it has a good picture of both ends, I am not affiliated with Amazon or Belkin, nor do I recommend this particular cable over any others. But this one would work just fine.

Copy and past that into your browser to see it. If you go to a store and ask for one, they may try to talk you into a very expensive one (more than $20 say). Don't pay that much for it. The quality matters, but the cables they try to sell you in stores are way overpriced! They have a huge markup on them.

Posted on Feb 07, 2009


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya Technician can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Technician (only for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Error 5011 cannon MG 5340

The printer error has occurred.
1.Turn off the machine and unplug the power cord from the power supply.
2.Plug the machine back in and turn the power on.(if you disconnect the power plug, all the faxes stored in the machine's memory are deleted).
If the above solution has not resolved your error, please contact your nearest service center.

Feb 26, 2015 | Cannon Office Equipment & Supplies

1 Answer

No dial tone on Mitel 5340 IP Phone. The message on the phone is DHCP: Discovery.

The network isn't configured properly for your phone to boot up. You should contact your phone vendor or system administrator for support.

Apr 05, 2011 | Mitel 5340 IP Phone

1 Answer

How to obtain a voicemail from a mitel 5340 when the password is invalid....The person left who knows it.....And now the I accidentally cleared the voicemail option...

The mailbox will need to either be defaulted or at least the password. Either your on-Site system administrator, or your vendor will have to make the change.

good luck,

Feb 04, 2011 | Mitel 5340 IP Phone

1 Answer

My Mitel 5340 ip phone will not turn on. i've changed the cable's and it still won't turn on. what could it be?

Is it plugged into the correct port (not the PC port)? The phone requires Power Over Ethernet - this is either done with a PoE Switch or PoE injector. This should provide power to the phone so it can boot.

Dec 14, 2010 | Mitel 5340 IP Phone

1 Answer

My Mitel 5340 will not go to voicmail and keeps ringing

You need to set this extension up in the Call Rerouting form in the PBX. Program the First alternative to go to the voicemail extension.

Oct 29, 2010 | Mitel 5340 IP Phone

1 Answer

Does the Brother XL-5340 do an overlock stitch? If it does do I need to change the foot and to which foot? Thanks

There is an overedge stitch (page 38) that uses the regular presser foot.

If you do not have a manual, you can download (free) from the Brother site.

Mar 31, 2010 | Brother XL-5340 Mechanical Sewing Machine

2 Answers

Eclipse 5340 deck

I forget about the security light but I do know about the clock. I believe you turn the deck off and hold display or push display and the clock will come up. Then use the preset buttons for adjustment. I think 1/2 is for the hour and 3/4 are for the minute. It has been a while for me doing this but I think it is right. I just powered mine back up a while back and am trying to find my starting cd. You wouldn't happen to know how to reset this function and start over?

Apr 11, 2007 | Eclipse 5340

Not finding what you are looking for?
Lexmark X5470 All-In-One InkJet Printer Logo

Related Topics:

43 people viewed this question

Ask a Question

Usually answered in minutes!

Top Lexmark Office Equipment & Supplies Experts

Don  Farrell
Don Farrell

Level 3 Expert

1018 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18411 Answers

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

Are you a Lexmark Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides