Question about Mintek MDP-1760 Portable DVD Player

1 Answer

Nothing happens When I put the power on, the logo comes on for half a second and then it goes black/no picture, no sound, but disc is still spinning.

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 4 Answers
Re: nothing happens


Posted on May 03, 2007

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


3 Points

Related Questions:

1 Answer

Blu ray shows the "Blu ray Disc" Logo on TV screen and then just show a black creen

Hi! and welcome to Fixya!

It looks like your tv is unable to handle the output video resolution from your bluray. The reason why you do not have picture on the tv screen after the bluray disc logo appears.

You can follow the instruction below to set the video resolution on your player to its lowest resolution:

1. Using your bluray remote control, press the following buttons in order... STOP button (press and release) ....HOME button (press and release)....POP UP/MENU button ( press and release )
Note: press the buttons in order with 1 second interval. Make sure tv and bluray are ON when you try this. If first attempt nothing happens, try this again.

2. When the home menu screen appears after doing the above instruction, you can set the video resolution again manually. Follow the instruction:
Using the BD remote control press HOME button > then go to SETUP > select screen settings > then change OUTPUT VIDEO RESOLUTION to Auto > change also 24P OUT to 1080P // set the BD-ROM 24P OUTPUT to Auto

The next time you turn on the bluray player you will have picture again.

Let me know if this works!

Oct 24, 2015 | Sony DVD & Blu-Ray Players

1 Answer

My Sansui SLED 2453W 1080p HDTV will not support my Toshiba BDK33 blu-ray disc player.

try to force resolution below 1080p to interlaced, or 720 and see what may have a bad logic board

Aug 20, 2012 | DVD & Blu-Ray Players

1 Answer

Doesn't load the disk

Someone needs to open it to SEE what is happening--if the unit holds more than one disc (model seems to indicate that) you likely have a mechanism problem with something jammed or even broken--mechanism could also be out of alignment which is a task for a pro.

Look and see what is happening is first thing needed here.

Apr 24, 2012 | Cyberhome CH-DVD 300 DVD Player

1 Answer

Will only play about half the dvds that we put into it. once in awhile if you turn it off and on it will read the disc.

This sounds like the spindle is not spinning the media you may need a new motor, take the top off to see if when you press play the dvd spins this will confirm this

Dec 21, 2009 | Samsung DVD-VR330 VCR and DVD Recorder

1 Answer

No Signal

Go to samsung and check support and Q & A for a firmware update

Jun 08, 2008 | Samsung BD-P1400 Blu-Ray Player

2 Answers

DVD stopped playing all DVDs

Reset you player by doing the following:
With the player on, hooked properly to your television, and on the correct station:
Open the tray
Close the tray (with no DVD inserted)
Hold the stop button down for a full 5 seconds
The CyberHome screen should appear. You should be able to play your dvd's now.

Feb 20, 2008 | Cyberhome CH-DVD 300 DVD Player

1 Answer

Unit will not start or load disc

Try opening up unit and using canned air and blow it out - sometimes simple dirt causes things like this While inside glance and see if you don't have some old tape or bits of labels that have come off and are anywhere inside that might be hanging the various working areas. Try using cd cleaning disk and vhs cleaning tape Without seeing this not sure what is causing it but may be something simple like the dust or pieces of label causing problems or the little rubber "tires" and other rubber components having gotten stretched out and slipping.

Nov 05, 2006 | Emerson EWR20V4 DVD Recorder/VCR

1 Answer

Dvd/vcr combo,vcr is fine ,but dvd no picture,or sound,disc reads.

Hi There is an I/P button on your player's remote control. Power your player on then press the I/P button on your remote control.

Aug 16, 2006 | Apex Digital ADV3800 DVD Player/VCR

Not finding what you are looking for?
Mintek MDP-1760 Portable DVD Player Logo

Related Topics:

48 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mintek DVD & Blu-Ray Players Experts

Jaime Hernandez

Level 3 Expert

2267 Answers

The Knight
The Knight

Level 3 Expert

66537 Answers

Steven Wander
Steven Wander

Level 3 Expert

574 Answers

Are you a Mintek DVD and Blu-Ray Player Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides