Question about 3Com OfficeConnect Wireless 11g Cable/DSL Gateway Router (3crwe754g72-a-uk)

1 Answer

3com Router and Panasonic BLC30 wireless camera

I have wpa encryption enanbled on my 3com router, but my panasonic blc 30 wireless camera only supports wep. Is there any way I can configure the router to allow the camera to connect with out disabling the wpa?

Thanks

Posted by on

  • hesham_saleh Jan 09, 2009

    i want to access ip camera with router to can watch it from any where

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 115 Answers

The solution I used was. I had a second router/ap that was wireless.
I then associated the #2 router/ap to the WPA main router,
And ran the Camera on wired mode thru the 2nd Router.

When you use an ext renal wireless AP that camera.

You get much better range. I had a che-po router.
And the range was 3x what it was using the cameras antenna.

Also Here's a back door to Panasonic FTP with all the camera related software they put out,
ftp://ftp.panasonic.com/pub/Panasonic/cctv/downloads/

Sketchlab.com

Posted on May 16, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Sometimes i cant find any network


To connectyour computer to a wireless router, you click the Refresh networklist, then Choose your wireless network and then click Connectto your secured Wireless Network, it will asks for a Network Keybefore allowing you to connect into your wireless network. This NetworkKey is either the WEP, or WPA or WPA2 Encryption key that is used toconfigure the Wireless Router. The Passphrase is an alternate way tosetup the Encryption key.
When you are requested for a Network Key, you can just enter the Passphrasethat was used to configure the Encryption key in the wireless router.http://www.fixya.com/support/r5270415-network_password_network_addressFor information on securing your wireless network,configuring the wireless router and configuring the wireless card in thelaptop/computer, please click on this link and follow my instructions :-http://www.fixya.com/support/r3559128-wireless_router_security

Mar 17, 2012 | 3Com OfficeConnect Wireless Router

1 Answer

Cant find how to connect to a wireless network with my cf-51


Theencryption key secures your data from unauthorized access. The router's password is a Passphrase or the WEP or WPA orWPA2 encryption key. The Passphrase generates the WEP or WPA or WPA2 encryptionkey and this is in the router's wireless settings. To connect to your wireless router, configure the router'swireless settings ie SSID, plus the WPAor WPA2 encryption key and then configure wireless cards in the laptops and orcomputers with these router's wireless settings. Then the laptops and desktopcomputers can communicate with your wireless router.

Jul 23, 2011 | Panasonic Toughbook CF-51 Notebook

1 Answer

I want to connect to a router.how do do it


Theencryption key secures your data from unauthorized access. The router's password is a Passphrase or the WEP or WPA orWPA2 encryption key. The Passphrase generates the WEP or WPA or WPA2 encryptionkey and this is in the router's wireless settings. To connect to your wireless router, it needs the router'swireless settings configured ie SSID, WPA or WPA2 encryption key and also thewireless cards in all the laptops and or computers needs to be configured withthese router's wireless settings. Then the laptops and desktop computers cancommunicate with your wireless router.

Apr 10, 2011 | 3Com 3C16700 /RETAIL3COM Officeconnect(R)...

1 Answer

What is the access address for a Panasonic BB-HGW700A


Wireless Encryption Key WEP or WPA -
You will findit on the router itself or open the Router GUI i.e 192.168.x.x page

Nov 08, 2010 | Panasonic (BBHGW700A) Wireless Router

1 Answer

I dont know how to get internet on my ds lite


Nintendo? You have to have a WEP key...and if your wireless encryption is not set up with a WEP key, if it has a WPA or a WPA-2 key, it won't work. You have to change the encryption on your wireless (either router or modem, whichever you are using) ...open a browser and type 192.168.1.1 in the address bar, put in your password, and change the encryption type to WEP...then put the settings in the DS.

Jun 13, 2010 | 3Com Wireless LAN Access Point 7250...

1 Answer

Unable to make router wireless


To use a wireless network/connection you need to do.
1. Configure the router's wireless with SSID, WPA encryption etc.
2. Next configure the wireless card in the computer/laptop with the router's wireless settings so it can connect to the wireless router.
Please click on this link for my instructions on how to secure your wireless network, configure the wireless router and configure the wireless card in the computer/laptop :-

http://www.fixya.com/support/r3559128-wireless_router_security

Feb 10, 2010 | 3Com Computers & Internet

1 Answer

Trying to connect to wireless network. No options for WPA encryption code on my 3com assistant.


When connecting to locked wireless network, u need to insert the correct password/key in order to access.

Jul 19, 2009 | 3Com OfficeConnect Wireless 11g Cable/DSL...

1 Answer

Panasonic cf-50 problems to connect wireless wpa personal


If the wireless card is an old model it possibly won't support WAP encryption. The wireless router most likely supports both WEP and WAP encryption.
WEP is not as secure as WAP so use the highest bit encryption that is available to you.

May 07, 2009 | Panasonic Toughbook 50 Notebook

1 Answer

3com router encryption


Go to option menu-click the security option

Se the password under the any one of the security parameter

save the configuration

Feb 21, 2009 | 3Com OfficeConnect Wireless Router

Not finding what you are looking for?
3Com OfficeConnect Wireless 11g Cable/DSL Gateway Router (3crwe754g72-a-uk) Logo

Related Topics:

383 people viewed this question

Ask a Question

Usually answered in minutes!

Top 3Com Computers & Internet Experts

NBX_Tech
NBX_Tech

Level 1 Expert

58 Answers

steve morris
steve morris

Level 3 Expert

1675 Answers

micky dee

Level 3 Expert

2642 Answers

Are you a 3Com Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...