Question about Dell Dimension 4600 PC Desktop

1 Answer

Error message rundll on startup

When I start up the computer an error message pops up as follows:
error loading C:\WINDOWS\system32\lumejeji.dll
The specified module could not be found

What do I do to fix this or do I need to have a pro fix it?

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 12 Answers

Looks to be a left over file. Probably not needed - this happens when you delete a program, but other files remain. Go to start button - click on search - click on all files and folders type lumejeji.dll in the top box - hit the search button

it will find the file - you can either drag it to the recycle bin or right click on the file and go down to delete and left click that.

Should fix your problem

HOWEVER
I just looked this .dll file up - Here is what I found - you may want to delete the file and run a virus scan as well
hope this helps
UMEJEJI.DLLFraudulent Security Program Your PC is infected. The file called LUMEJEJI.DLL is considered unsafe and there may be other infections on your PC.
You should urgently check your PC and remove any malicious software including LUMEJEJI.DLL as soon as possible.

Posted on Dec 30, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Emachines T4010 won't start up, says image checksum, and that an image is corrupted


Receiving a bad image checksum error message when upgrading a computer to Windows XP means that a Windows system file such as user32.dll is damaged. This error occurs when any damaged system file is encountered that isn't overwritten during Setup. The repair process for this error involves voiding the damaged dynamic link library file from the DOS command line prompt and replacing it with a new copy from the Windows XP disk.

Insert a clean Microsoft Windows Millennium Edition (ME) or Microsoft Windows 98 Edition startup disk into the computer, and hold the reset button on the front of the computer until the system commences rebooting. Navigate the Windows startup menu with the keyboard's directional keys and select 'Start Computer with CD-ROM Support'. Hit "Enter" to continue. Write down your CD-ROM's drive letter on a piece of paper. At the command prompt, type "Drive:" without quotes (Drive should be replaced with the drive letter on which Windows is installed), and press "Enter." Type "cd windows\system32" without quotes, and press "Enter." Type "ren user32.dll user32.old" without quotes and again press "Enter." This renames your damaged user32.dll file so it is not recognized by the system, but still physically exists as a backup if needed in the future. Eject the Windows ME or 98 disk, and insert the Windows XP disk. At the command prompt, type "extract CDROMDrive:\i386\user32.dl_ Drive:\windows\system32\user32.dll" without quotes, replacing CDROMDrive with the CD-ROM's drive letter that you made a note of earlier, and replacing Drive with the system's drive letter on which Windows is installed. Hit "Enter" to execute the command. This process extracts a new copy of the user32.dll file to your hard disk, from the Windows XP CD. The new file will be found in the Windows/System32 directory. Restart the system by holding the reset button on the front of the tower until reboot commences.

Jan 03, 2013 | PC Desktops

4 Answers

Everytime I turn on my computer, I get this error message: Error loading C:\PROGRA~2\MYWEBS~1\bar'1.bin\F#SCRCTR What does it mean and how can I fix it? My operating system is Microsoft Vista.


Please click on Start, Click on Run and type the following in the open box and click OK
msconfig

Vista: In the Start Search field, type msconfig , and press Enter . The System Configuration window opens.

Or

Press and hold Windows logo key on keyboard and press R. It will open Run Window. Type the following in the open box and click OK

MSconfig

The System Configuration window opens.

Please click on Startup tab

Remove the check mark from entries related to Mywebsearch OR M3PLUGIN.DLL

Then click on Apply, Close and Please click on Exit without restart.

When the system restarts, you will see a message about System Configuration Utility. Click in the box for "Do not Show this message" and then click on OK.

More on this solution here.

May 05, 2011 | HP PC Desktops

1 Answer

Whenever we try to open skype a dialoge box apppears showing fatal error failed to load library d3d9.dll.


You will have to re-install the Skype application in order to get rid off the error.
Please follow the below step:
1. download and install the Revo uninstaller application online(It's free).
2. Look for the "Skype" application and select the "uninstall" option.
3. Select "Advance" scan and remove all the remaining files of skype.
4. Reboot the computer.
5. download the d3d9.dll file from the following website http://www.dll-files.com/pop.php?dll=d3d9
6. Copy the d3d9.dll file and paste it at the following location C:\windows\system32
7. You will have to register the dll file before installing the skype application. To register the dll file:
Click on "Start" menu and select the "Run" option or Simply Windows key+R
Then, type regsvr32 d3d9.dll and click 'OK" .
8. Once the dll file is registered, you can install the Skype application and continue using it.
I hope this should fix the issue.
Thanks, Vicky

Dec 27, 2010 | Compaq Presario 5000 PC Desktop

1 Answer

STOP C0000221 erro de hardware desconhecido systemroot system32 ntdll.dll


You may receive one of the following stop error messages while working on your Windows XP computer.
STOP: C0000221 unknown hard error
Path\File_nameSTOP: 0xC0000221 unknown hard error
C:\Winnt\System32\Ntdll.dll (or another specific file or driver)
STOP: 0xC0000221 STATUS_IMAGE_CHECKSUM_MISMATCH
Path\File_name
Note: The error message may be discussed in many different formats-blue screen or message box. It depends on when the corrupt file was detected.
Similarly, you may receive the following STOP messages when a critical system file fails to load on your Windows NT and Windows 2000 computer.
STOP: C0000221 unknown hard error
<path>\<file_name>STOP: 0xC0000221 unknown hard error
c:\winnt\system32\ntdll.dll
Note: Some other drive may also be given in the message.
On Windows 2000 the following error message may display:
STOP: 0xC0000221 STATUS_IMAGE_CHECKSUM_MISMATCH
<path>\<file_name>
You usually face this problem when an incorrect driver for one or more hardware is installed on your system. For instance, the error messages described above are displayed when you install a millions of instructions per second (MIPS) driver on a x86 system.
Cause of the Error
This error occurs if the file given in the error message is damaged.
Your Windows XP operating system checks the following files for integrity during system startup:
  • All driver files, excluding the files that loaded using the system loader to start your system .
  • All DLL (Dynamic Link Libraries) on the system. These include, Graphics Driver Interface (GDI), User, Ntdll, Crtdll, Shell, Kernel and several other DLL files on the system.
  • On Windows NT and 2000 computers, all DLLs loaded in the Window server address space are also checked.
The problem may also occur if an Iomega Zip drive is connected to the same cable as your hard disk drive.
Resolution Method
You can resolve this issue by removing the corrupt driver from your computer and then reinstalling a fresh and healthy copy of the driver. You may need to use the Device Manager utility to remove the driver. It is recommended that you clean your registry with the help of a reliable tool, such as RegGenie to ensure that all entries related to the uninstalled driver are removed from the system. After you have completely removed the corrupt driver, restart your system and install a fresh copy of the driver on the system.
If this step does not resolve the problem, you may have to reinstall Windows XP.
It is recommended that you regularly clean your registry with the help of a registry cleaner tool and perform antivirus and antispyware scan using tools, such as Antivirus Plus and StopZilla to prevent such errors from occurring on your system.

GOOD LUCK :-)

Feb 03, 2010 | Intel PC Desktops

1 Answer

RUNDLL Error Message, Windows XP


Dear sir,

Welcome to Fixya.

Rundll error is observed when computer is attacked by viruses and spyware.I think your computer is infected by virus and spyware.You can remove the viruses and spyware by using good Antivirus software,but if you want to get rid of all errors permenantely, solution is format your pc and reinstall your operating system then install good antivirus.
I think it helps
if you have any problem regarding this issue leave a comment or feedback we were happy to assist you.


Have a Nice Day!

Oct 02, 2009 | Dell Dimension E520 PC Desktop

1 Answer

I hit F8, here is the new error message


If this is all you are seeing, then this is not an error. What is happening here is that your computer is loading Safe Mode. This is a way to load Windows operating system without any extra software or programs, using the most basic drivers and software to load. There are a lot of benefits to accessing this mode, especially if you installed a program that stops you from getting into Normal Mode, or you have a virus that does the same. It makes it easy to troubleshoot. Here is a link to a website with a little more info:

http://www.computerhope.com/jargon/s/safemode.htm

If you load your computer normally by not pressing any keys, then you should be fine.

Mar 27, 2009 | HP Pavilion xt938 PC Desktop

1 Answer

RTHDCPL.EXE err


Error Message after Installing Security Updates 925902 and 928843 This afternoon (April 3rd, 2007) my Automatic Updates alerted me about a couple updates I needed to install, so I did. Upon rebooting the computer though I was confronted with the following error message
"RTHDCPL.EXE - Illegal System DLL Relocation"

"The system DLL user32.dll was relocated in memory. The Application will not run properly. The relocation occurred because the DLL C:\WINDOWS\SYSTEM32\HHCTRL.OCX occupied an address range reserved for Windows system DLLs. The vendor supplying the DLL should be contacted for a new DLL."
  


Cause of Error Message

Turns out this error occurs when the Realtek HD Audio Control Panel by Realtek Semiconductor Corporation is installed. This is my built-in sound card on my computer.

The HHCTRL.OCX file that is included in the Security update 928843 and the User32.dll files that is included in Security Update 925902 have conflicting base addresses. When Windows loaded the HHCTRL.OCX file before it loads the User32.DLL file, the problem occurs.

The error occurs when the following third party programs or applications are installed on a computer with Windows XP Service Pack 2 installed. 
Realtek HD Audio Control Panel
ElsterFormular 2006/2007
TUGZip
CD-Tag
Microsoft now has released a patch to correct the problems, you can go to the following link to download and install the patch for the patch :-)

http://support.microsoft.com/kb/935448

Oct 18, 2008 | PC Desktops

1 Answer

Dell dimension5150 won't startup


The solution is to restore the GDI32.dll from the service pack into Windows system folder with the following steps:
  1. Boot from your Windows CD
  2. At Welcome to Setup screen, press “R” to start repair option and open up a Recovery Console’s command prompt window.
  3. Select the Windows installation to use, normally is C:\Windows and just one option. If so, press “1′ and hit Enter.
  4. If prompted for administrator password, enter the password (normally blank) and hit Enter.
  5. Make a backup of existing GDI32.dll in system folder with following command: REN C:\Windows\System32\GDI32.dll C:\Windows\System32\GDI32.dll.orig (take note of spaces)

  6. Replace “C” of the drive letter of your Windows installation drive if necessary.
  7. Then copy backup GDI32.dll from c:\windows\servicepackfiles\i386\gdi32.dll to the system folder with the following commands: copy C:\Windows\ServicePackFiles\i386\GDI32.dll C:\Windows\System32\GDI32.dll (take note of spaces)
  8. Restart computer.
This should Fix the problem.

Oct 08, 2008 | Dell Dimension 5150 (DIM515MIN) PC Desktop

1 Answer

I have an Emachine and the disk drive won't work a box pops up and says at the top RunDLL and inside it says Error loading C:Windows/system32/gzmrotate.dll


RunDll is a system file. Error loading C:Windows/System32 is also system files. Just do a repair---not a recovery. The repair option is after you have to hit F8 then choose "R" for repair. This should take care of it. If not it may be your hard drive in which case you would replace it and have to do a full reinstall.

Aug 10, 2008 | PC Desktops

Not finding what you are looking for?
Dell Dimension 4600 PC Desktop Logo

Related Topics:

122 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dell PC Desktops Experts

joecoolvette
joecoolvette

Level 3 Expert

5660 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18298 Answers

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

Are you a Dell PC Desktop Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...