Question about Acer Computers & Internet

1 Answer

Wireless internet I cant get my wireless connection to work. I hooked up the router and my computer picked up the signal but I still cant connect to the internet

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Genius:

    An expert who has answered 1,000 questions.

  • Master
  • 1,011 Answers

Dear,
what about the modem. are u using a modem for dsl and then wireless router. if this is the condition, then u have to give different ip addresses to each. like 192.168.1.1 for modem and 192.168.0.1 or 0.2.......so on . then both will work and then configure the wireless after this. hope u understood what i mean to say. ask if further required or condition changes.
regards,

dont forget to rate it.

Posted on Dec 30, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I need a diagram of how to hook up a wireless route


What kind of router?
What are you trying to connect to it?
What have you tried?
Usually a wireless router broadcasts a signal and lets you know it is there via an SSID.
Most people do not know to reconfigure this so they leave it at factory default settings. (Netgear, Linksys)
Also, the default ip address of most wireless routers are dependent on what kind or routers brand you have.
I would first connect to your router using a CAT5 cable (the one that looks like a bigger telephone jack)
This will determine that your router is processing the internet connection.
If it is, then you can start to configure your wireless.
Default, go to your computer's system tray (usually the group of icons at the bottom right of your screen)
There should be a little antenna, or two computers with a bouncing green or red dot) double click on it and a new window will pop up asking you to choose which connection you want.
you can then pick your connection and the computer's wifi will try to connect.
If there are several of the same type, connect to one and then turn your router off. If you stay connected, that was not yours.
When you have yours connected, write to us again with model numbers and we can try to help you set up a SECURE network.
A friend who knows what to do is a good solution too.
Good luck.

Sep 26, 2010 | Computers & Internet

2 Answers

Router all hooked up get my network name but no internet access its a netgear wireless grouter WGR614


Most new routers now a days need to be connected to with a network cable first, login to the router console and setup the wireless and wireless security before they will operate. you will want to login to your routers web interface. looks like this screen and work with the wireless menud5d6fb6.png

Sep 01, 2010 | Computers & Internet

1 Answer

On my windows xp it says my internet is working but when i try and open a internet page it says it cannot load, please help


FIRST POSSIBLE SOLUTION: Determine which version of IE you have installed. To do so, click "Help" on the IE toolbar and then click "About Internet Explorer." The version will appear in a dialog box. Go to the Microsoft website and upgrade to IE version 7 if you are using an earlier version. By upgrading, you may be able to resolve your IE problems. Repair damaged files automatically using IE 7's "Reset" feature. Go to the "Tools" menu and click "Internet Options." Click on the "Advanced" tab. Click the "Reset" button. Close all other programs if asked, and then click "Reset" to confirm that you want to reset IE and repair the files. Use XP's System File Checker to resolve IE problems. Click "Start" and then "Run." In the "Open" box, type "sfc /scannow" and click "Go." The System File Checker will scan your computer, finding and repairing damaged or missing files. Restart your computer after the process is finished. Update Windows XP to make sure you have the most recent service pack installed. Go to the Microsoft Windows, check for any available updates and install them. SECOND POSSIBLE SOLUTION: Make sure your computer is not too far away from your wireless router and you have a good signal. By placing your mouse pointer over the wireless connection icon, located in the bottom right corner of your taskbar, you can check to see if your signal strength is good. Anything less than a good signal can cause intermittent connections. SOLUTION: You will need to relocate your wireless router closer to your computer. If you have a 2.4 GHz wireless home phone, take notice if you lose the internet connection when placing or receiving a call. These wireless phones interfere with wireless routers because they both operate on 2.4GHz frequencies. If this happens you need to power down the router and then turn it back on. This will happen occasionally but not all of the time. SOLUTION: (1) upgrade your wireless phone to 5.8GHz, (2) use a corded phone or (3) use a wired internet connection to your router. If steps 1 and 2 did not solve your internet connection, borrow a friend?s laptop with a wireless card and see if their laptop can connect to the internet. Be sure to set your friends wireless connection settings to the same settings that your wireless card is set to. If your friend?s laptop connects to the internet then you may have a bad wireless card. Try reconfiguring your wireless card settings before going out to purchase an external wireless card. If your friend?s laptop can?t connect to the internet, try resetting the router to the factory defaults. Change the settings on the wireless card to the same settings as the factory default on the wireless router. If this works you are back in business. If it does not work for either computer, the wireless portion of your router is bad. SOLUTION: Purchase a new router or use a wired connection to one of your router ports.

Sep 24, 2009 | Dell Dimension 3000 PC Desktop

2 Answers

Can i use Bluetooth USB Adapter to connect PC to wireless router?I purchased a new PC that's connected to a wireless router for internet. I want to connect my old PC to the same wireless router. I don't...


Hi, to connect your computer to the wireless network of the router you need to have a wireless adapter. The bluetooth adapter will not work in this case as the router does not communicate with the bluetooth signals.

Purchase a wireless adapter like NETGEAR WG111

Rate it, if it helps.

Regards
Anand

Aug 03, 2009 | Computers & Internet

1 Answer

I have the acer 8.9 inch with a built intnet wireless care. The one that connectst to the internet throutht the air waves Just as if it needs no router or modem, but i cannot connect. What do i do


It does need a Router and Modem. Every computer does. Even if you bought the new Verizon mini pc, it needs the towers signal since that is the router. Wireless just means that you don't have to drag a wire from the computer to the router. You need a wireless router that will attach to the modem for this to work. Otherwise the signal from the computer just goes into the air into nowhere. If you go to stores that have "hot spots" or "wifi" and use your computer, that just means that they have a router that you're signal is hooking up to.

Jun 09, 2009 | Acer Aspire L100 PC Desktop

1 Answer

I CAN NOT CONNECT TO THE INTERNET ..using Linksy wireless remote


the wireless card installed to your computer is working..as you said you can view all wireless networks...your computer is good too...the only issue is you cant connect to the wireless router...

turn off and unplug the power cable of the Modem
turn off and unplug the power cable the router

wait for 30 seconds
plug in and turn on the modem, wait for all the light turn to solid green ( no blinking lights )

then power on the router

if you saw the wireless icon light turn solid...

go to your computer...right click the wireless icon...select repair

if this doesnt work....reset your internet router by press and hold the reset button behind the router near the power plug (atleast 15 sec)

then connect your PC..the wireless network dont have the WEP key anymore because of the reset..you can reconfigure and put back the WEP key when you get connected.

Mar 16, 2009 | E-Machines (T2958) PC Desktop

1 Answer

How to connect wireless router, Netgear WGR614, to my computer?


4 steps to set up your home wireless network
1.
Choose your wireless equipment
The first step is to make sure that you have the equipment you need. As you're looking for products in stores or on the Internet, you might notice that you can choose equipment that supports three different wireless networking technologies: 802.11a, 802.11b, and 802.11g. We recommend 802.11g, because it offers excellent performance and is compatible with almost everything.
Shopping list
• Broadband Internet connection
• Wireless router
• A computer with built-in wireless networking support or a wireless network adapter

A wireless router
The router converts the signals coming across your Internet connection into a wireless broadcast, sort of like a cordless phone base station. Be sure to get a wireless router, and not a wireless access point.
A wireless network adapter
Network adapters wirelessly connect your computer to your wireless router. If you have a newer computer you may already have wireless capabilities built in. If this is the case, then you will not need a wireless network adapter. If you need to purchase an adapter for a desktop computer, buy a USB wireless network adapter. If you have a laptop, buy a PC card-based network adapter. Make sure that you have one adapter for every computer on your network.
Note: To make setup easy, choose a network adapter made by the same vendor that made your wireless router. For example, if you find a good price on a Linksys router, choose a Linksys network adapter to go with it. To make shopping even easier, buy a bundle, such as those available from D-Link, Netgear, Linksys, Microsoft, and Buffalo. If you have a desktop computer, make sure that you have an available USB port to plug the wireless network adapter into. If you don't have any open USB ports, buy a hub to add additional ports.
2.
Connect your wireless router
Since you'll be temporarily disconnected from the Internet, print these instructions before you go any further.
First, locate your cable modem or DSL modem and unplug it to turn it off.
Next, connect your wireless router to your modem. Your modem should stay connected directly to the Internet. Later, after you've hooked everything up, your computer will wirelessly connect to your router, and the router will send communications through your modem to the Internet.
wireless_chart.jpg Next, connect your router to your modem:

Oct 29, 2008 | Computers & Internet

1 Answer

I have a D-Link wireless router, it is a DI 524 model. Well I just recently had to reinstall everything on my desktop computer, which my wireless router and dsl pipe are hooked up to. I have a laptop with...


IF YOUR WIRELESS NETWORK ACCESS POINT IS CONNECTED BUT YOU CANT GET ONLINE,YOU WILL NEED TO GO TO YOUR DLINK ONLINE ROUTER SETTINGS PAGE AND CHANGE YOUR PASSPHRASE KEY WHICH YOU NEED TO CONNECT THE ACCESS POINT TO THE WIRELESS ROUTER.BEFORE YOU DO THIS THOUGH,OPEN UP THE NETWORK CONNECTIONS WIZARD ON YOUR LAPTOP AND VIEW"AVAILABLE WIRELESS NETWORKS".IF YOU SEE YOUR NETWORK LISTED,HIGHLIGHT THE NETWORK AND PUSH THE CONNECT BUTTON.WINDOWS WILL ASK YOU FOR A PASSPHRASE OR PASSWORD.ENTER THAT AND CLICK CONNECT.YOU SHOULD THEN GET CONNECTED TO THE WEB.IF YOU DONT HAVE A PASSPHRASE OR PASSWORD,THAT IS WHY YOU CANNOT CONNECT THRU THE ROUTER AND YOU WILL THEN NEED TO CREATE A NEW PASSPHRASE AT THE D-LINK WEB SETTINGS PAGE.GOOD LUCK.

Aug 22, 2008 | Computers & Internet

1 Answer

I just purchase a computer and I'ved try to hook it up wireless to the internet and it will not connect. I have a wireless router that work fine on my old computer. The computers states that is is getting...


open up internet explorer, go to tools, internet options, connections, then tick never dial a connection and apply.

Close IE then open it up again and click refresh a few times and you should connect.

If you have security enabled i assume you have inputed the passkey to your router in the pc first

Aug 21, 2008 | Gateway Computers & Internet

1 Answer

Hi, I have a desktop and a wireless router. The desktop was connected to the internet via a Belkin USB wireless adaptor but it has suddenly stopped and does not pick up any signal. I have uninstalled and...


Belkin products are notorious for breaking down at a high rate. If you wanted to rule out your computer as the culprit, you could install the belking adapter on your laptop (disable the built-in one) and see if it still works. I would also suggest going here:

http://www.belkin.com/support/

and typing in your product model # and downloading the latest firmware/software for it. As always, restart your computer.

Jun 10, 2008 | Belkin Computers & Internet

Not finding what you are looking for?
Computers & Internet Logo

Related Topics:

83 people viewed this question

Ask a Question

Usually answered in minutes!

Top Acer Computers & Internet Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18330 Answers

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

joecoolvette
joecoolvette

Level 3 Expert

5660 Answers

Are you an Acer Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...