Question about D-Link AirPlus Xtreme G DWL-2000AP 802.11g/b Wireless Access Point

1 Answer

Can't connect 2 pc to 1 printer

I hav 1 printer hp color leaser jet 2550l ,i can't connect it to 2 compiuters

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Expert
  • 50 Answers

Steps to fix your issue

  1. install printer driver on one computer
  2. Make sure both computers are connected in same network by ethernet cable or wireless connection.
  3. share the printer on 1st computer
  4. access the shared printer from 2nd computer through network
This way your can access one printer from 2 computers. This setup work only when the 1st computer is turned on because HP leaser jet don't have the capability to work as network printer as they cannot acquire IP address.

If u need further information on how to configure 2 computer please refer below link
http://www.ajcsoft.com/connect_computers_together.php

For information regarding how to share printer on windows XP refer below link
http://www.microsoft.com/windowsxp/using/networking/expert/honeycutt_july2.mspx

Posted on Dec 30, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My HP photosmart 7510 does not recognize the presence of any color cartridges. I use only HP 564 cartridges. It prints only black. What can I do with it?


Check this link for ink cartridge problems. The part on "older generation cartridges" is very interesting. It is located on page 39 of the manual (page 40 of the pdf).


http://h10032.www1.hp.com/ctg/Manual/c03011756.pdf

Jan 06, 2015 | HP Photosmart 7510 e-All-in-One Printer

1 Answer

My hp 4500 printer is not printing clearly


You may want to post to Printers Category for a Printer expert.

Apr 16, 2013 | HP Office Jet 4500 Wireless All-in-one...

2 Answers

My Hp Photosmart C5820 all in one printer is connected to my HP Pavilion dv6000 laptop (Windows XP). How do I share this printer wirelessly with my new Dell laptop (Windows 7)?


Any printer that isconnected to a computer and is connected on a LAN can be configured so allother computers on the same network can print to this printer. This means thecomputer with the printer attached to it MUST be booted up at all times whenother computers want to access the printer. You need to install theprinter driver on the computer and configure it as a Shared printer. The other computers on thenetwork need to add this printer to their computer. Follow these steps toset-up a shared network printer :- 1. Connect the printer tothe computer and install the printer driver. 2. Open Printers and Faxes- right click on this printer and click Sharing - click Sharing tab and click Share this printer, and then if you wish you could change theShare name, then click OK 3. Right click on theprinter - click Properties - click Print Test Page to confirm printerinstallation.
Follow these steps toconfigure the computers on your network :- 1. Open Printers and Faxes- click Add a printer - Next - select a network printer, or a printer attached to another computer - Next. 2. Select Browser for aprinter - Next 3. Click on and expand theMicrosoft Windows Network down to the computer with the printer - Next 4. Select Yes for - Usethis printer as the default printer - Next - Finish 5. Right click on theprinter - click Properties - click Print Test Page to confirm printerinstallation. b>

Mar 04, 2011 | HP Computers & Internet

1 Answer

Can't get hp photosmart wireless to connect to router


Sometimes it is difficult to connect a printer to a wifi network.... First, ensure that your printer has wireless capability and that it is in range of the router... (This can be fixed by moving closer to the router)..... If this is true, then you can move on to step 2... Step 2, go to "Settings" and find Network Settings or anything in there that has something to do with wireless..... Step 3, Once you have found that, select it and it should have some kind of Wizard to find all in range wireless networks.... Step 4, Select the wireless network that you wish to connect, (make sure at this time to have the password for your network at hand).... Step 5, Enter your password, enter the correct settings, and connect.... Allow some time for it to connect about 5 minutes..... After, this you should enjoy wireless printing from your laptop(s).... Hope this works :)
PS: If you are attempting to print with a desktop, then skip all those steps..... Just Easily connect the USB Cable from your printer to your desktop..... Your computer should do all the rest :D ALSO, if this doesn't work for you laptop(s) then a quick fix is to use the USB cable that came with the printer and connect it from your printer to your laptop, again your computer should do all the rest :)

Jan 08, 2011 | Computers & Internet

1 Answer

Wireless Printer Issue.


As I understand your issue, the HP Laserjet 1020 is a USB printer. You have it attached to a desktop PC. If that PC is rebooted, you can print for a short while.
The problem is probably not your network, but your desktop.
I would do the routine maintenance on it. Clear all the temp files, check hard drive free space and defrag the drive.
Then get online and download Malwarebytes.org spyware malware scanner tool. Scan the desktop PC for malware and clear out anything that may be occupying the resources of this PC.

Apr 06, 2010 | Nortel 2332 802.11a/b/g Wireless Access...

1 Answer

Antenna required to connect ap 530in 802.11a mode


The manual for this AP states "If both Radio 1 and Radio 2 are set to the IEEE 802.11b/g mode, Radio 2 must be configured to an external antenna."
802.11a mode is only supported on Radio 2 per the documentation.

Mar 29, 2010 | HP ProCurve 530 (J8986A) 802.11a/b/g...

1 Answer

Connecting two computers and two printers together


Go to Control Panel>Printer and Faxes>Add Printer> Network Printer>search>then find you printer and hit ok.

Mar 05, 2009 | Computers & Internet

1 Answer

Airport Express, Bonjour Printing Does Work With Leopard


In the setup of the Airport network settings, you have to make sure that AppleTalk is actually turned on (or the box is checked). When using Mac's with Leopard and you use both the ethernet port and airport off and on, the OS tends to deactivate AppleTalk. Its not a set thing, just random.


Jun 27, 2008 | Apple AirPort Express (M9470Z/A) 802.11g/b...

Not finding what you are looking for?
D-Link AirPlus Xtreme G DWL-2000AP 802.11g/b Wireless Access Point Logo

223 people viewed this question

Ask a Question

Usually answered in minutes!

Top D-Link Computers & Internet Experts

Prashant M
Prashant M

Level 3 Expert

2259 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18333 Answers

Mike

Level 3 Expert

4332 Answers

Are you a D-Link Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...