Question about RCA D52W23 52" HDTV CRT TV

1 Answer

RCA TV question....

I had posted a question about my tv, and was browsing through other peoples problem, and saw an interesting comment you added for sometime....about checking these fuses...that didnt look like fuses, but rather small brown caps....

I have a RCA D52W23 tv, and it had started doing the tricolor ghosting/double image thing....and the screen at the top and bottom looked like it was caving in towards the center.... i had taken everything apart, nothing looked damaged, smelled burned, or arcs when i power the set on.....then after a couple of minutes of looking for the "Auto-Convergance" option i knew was in setup, i could no longer find it, and then as i was looking through the menus the tv powered off completely. and now if you press the power button, the power lights up for a few seconds, the screen never turns on, then the whole unit turns off....and you can't power it back on....unless you unplug it from the wall for a few minutes and try it again.

Does this sound like the same kind of problem? I hate to bug ya so close to new years, but it sounds like you know the exact problem i have. I'd appreciate any help, thanks!

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • RCA Master
  • 5,138 Answers

OK you have 2 problems First Go to Capacitors cp150 2200uf 16 v look to see if it is puffed up on top if so replace it and 2 others cp114,cp120 220uf 35 v . The fuse you are looking for is on Right side of (FBT) flyback Transfomer there is 3 of them the one in the middle is the convergence Fuse FL231.Go to http://servicemanuals.vstore.ca they will have what you need ! If you need anymore help let me know. Happy New.

Posted on Dec 31, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My rca projection 52" tv


http://www.partstore.com/OpenSearch/Model/Thomson/RCA.aspx

Jul 07, 2011 | RCA P52960 52" Rear Projection Television

2 Answers

When i turn it on the screen turns green then blue and then shuts off


This is one of a group of sets that had bad picture tubes (RED, GREEN AND BLUE).

The tubes are no longer available from Sony and only available on a rebuild basis---very expensive.

There is something easy that requires no parts you can try in an attempt to cure it. Takes about 15 minutes and I can tell you how and what to do.

If this is of interest to you rate this solution as very helpful and comment here and I will assist you.

SD TECH

Aug 30, 2010 | Sony KP-51WS500 51" Rear Projection...

1 Answer

I need a owners manual for a RCA tv i just purchased,Could you tell me where to get one?Thanks


Here is a link to download the owners manual and spec sheets.

http://tv.rca.com/RCATV/NewTV/Templates/SupportDownloads.aspx?NRMODE=Published&NRORIGINALURL=%2fen-us%2fproductdownloads%2ehtml%3fMN%3dM50WH185&NRNODEGUID=%7b35D79B02-4AAE-4834-BFD0-1124EA501FA2%7d&NRCACHEHINT=NoModifyGuest

I hope that I have provided the correct information that will assist you in the resolution of this issue. If you have any questions, please post back with a comment to this thread.
If I have helped you with your question and/or solved the problem, please take just a moment to rate this post. Thank you!
I hope that you can rate this a FixYa experience.

May 03, 2009 | RCA D52W20 52" Rear Projection HDTV-Ready...

3 Answers

TV LOOKS LIKE ITS 3D


One might think that 3D would be a good thing but I am assuming that the problem is that it looks 3D without the glasses or in other words horribly fuzzy. If this is so you should be able to adjust the convergence in the set up menu to resolve your issue.

Feb 26, 2009 | RCA P61927 61" Rear Projection Television

1 Answer

Projection TV parts source?


http://servicemanuals.vstore.ca/
has plenty of screen components for the RCA and GE models HDTVs

Jan 25, 2009 | RCA R52WM24 52" HDTV Projection Television

1 Answer

KP-65WV700 convergence problem


AD board is some thing else and in convergence problem only D board will be replaced.
being a TV Tech, I do repair D Board on component level.
If you need D Board part number, let me know.

Dec 08, 2008 | Televison & Video

1 Answer

RCA HD52W56 inneed of help no power


Ok there is no light on front panel. doesnt blink or try to turn on? this is an indication of a main power interuption. as always the main fuse can be checked.

Apr 14, 2008 | RCA HD52W56 52" Rear Projection HDTV

Not finding what you are looking for?
RCA D52W23 52" HDTV CRT TV Logo

116 people viewed this question

Ask a Question

Usually answered in minutes!

Top RCA Televison & Video Experts

The Knight
The Knight

Level 3 Expert

69808 Answers

matt martin
matt martin

Level 3 Expert

1198 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Are you a RCA Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...