Question about IBM Infoprint 1532 Laser Printer

1 Answer

How to config the IBM 1532 's print margin

I saw someone pressed "confirm"+right button to enter the config page when switch on the print. But I never can find the configure page even I do like that.
Please instruct me if some further tricks I need to do. Thanks.

Posted by on

  • Anonymous Feb 18, 2009

    I have an InfoPrint 1532 and need to adjust margins. I have found instructions that say hold down the Go and Return button and then power on but my unit doesn't have a Go and Return button. It only has Back, Menu, Stop, The Navigation keys, and the Numeric Pad. Are there different buttons to use for this particular model?

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Expert
  • 65 Answers

Turn the printer off
Hold down Go and Return, then turn the printer on. Release both buttons when the display changes to Performing Self Test
After a couple of seconds the display will change to Registration
Change the size of the margin:
a. Press Right Arrow until the asterisk to the right of the number you want to change starts blinking and then press Select
b. Press the Left Arrow or Right Arrow to change the value and then press Select
Once you have made all the changes that you need to, press Return one time
Press the Left Arrow until Exit Diagnostics is displayed and then press Select

Posted on Jan 17, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How reset photoconductor ibm infoprint ibm1512 thank you


The instructions for IBM Infoprint 1412/1512 printer's photoconductor is the same as the Lexmark E342.

The instructions are located here: http://support.lexmark.com/index?page=content&id=HO2564&locale=en&userlocale=EN_US

Recap of Instructions:

To Reset Photoconductor page count:
1. Turn off printer
2. Press and hold the Select and Return buttons at the same time on the panel and turn the printer on (continue holding down buttons until printer screen displays "Performing Self Test" or "CONFIG MENU").
3. If "Reset PC Cnt" does not appear on screen, press the left or right menu button until it appears.
4. Press "Select" and the message "Resettting PC Cnt Value" should briefly appear indicating the page count is reset.
5. Turn off printer when "CONFIG MENU" appears again.
6. Wait 5 or more seconds and turn back on. Done.
7. It is suggested to check and verify that the PC Count is reset by printing a menu setting page:
a. Press left or right menu buttons until you see "Utilities Menu" and press "Select".
b. Press left or right menu button until you see "Print Menus" and press "Select".
c. This should print out the information. Look for "Cartridge Info" and the word "Photoconductor". It should indicate "OK" or close to 100%.
d. If not showing "OK", print 10-20 pages and Print Menu again to check. If still not, reset PC again and check again.

Jan 13, 2011 | IBM Infoprint 1512 Laser Printer

1 Answer

How do I reset the maintence kit counter for an Infoprint 1532?


This is a lexmark based machine with IBM logo's
1 of the 2 options should get you squared away
---- Option 1 ----
To enter the Diagnostic Mode:
1. Turn the printer off.
2. Press and hold the Go and Return buttons.
3. Turn the printer on.
4. Release the buttons when "Performing Self Test" displays on
the operator panel.
This counter is reset by the servicer after a "80 Scheduled
Maintenance" message displays (300K copies) and a maintenance
kit is installed.
To view the Maintenance Page Count:
1. Select Maintenance Count Value from the diagnostic menu.
2. Press Return to go to the previous menu.
To reset the Maintenance Page Count to zero:
1. Select Reset Maintenance Count. Pressing Select causes the
maintenance page counter to reset to zero.
- Reset Maintenance Count Saved displays momentarily.
When the reset operation is complete, the menu returns to
the Printer Setup Reset Maintenance Count screen.
---- Option 2 ----

Maintenance page count
This counter is reset by the servicer after a 80 Scheduled Maintenance message displays
(300K copies) and a maintenance kit is installed.
To view the maintenance page count:
1. Select Maintenance Count Value from the Configuration menu.
2. Press Return to go to the previous menu.
To reset the maintenance page count to zero:
1. Select Reset Maintenance Count from the Configuration menu.
2. Pressing Select resets the maintenance page counter to zero.
Reset Maintenance Count Saved displays momentarily. When the reset operation is complete,
the menu returns to the Printer Setup Reset Maintenance Count screen.

Oct 19, 2010 | IBM Infoprint 1532 Laser Printer

1 Answer

How do I print a confirmation page for this fax


1. First You need to press the additional functions button on the front.
2. Select Report Settings button
3. Select Printer button under the Print List menu
4. Press either PCL button or PS button to print the appropriate config page.
5. Press Configuration Page button
6. Select Yes button to confirm printing of config page.

Feb 19, 2010 | Canon LaserCLASS Fax 710 Printer

1 Answer

Receiving fax confirmation & worded side up or down when sending


  1. Print a configuration report according to the following instructions:
  2. Press MENU/ENTER .
  3. Press the < or the > button to select Reports , and then press MENU/ENTER .
  4. Press the < or the > button to select Config report , and then press MENU/ ENTER .
  5. select the xmit config and choose .

Feb 09, 2010 | HP LaserJet 3330 All-In-One Printer

1 Answer

Tray 1 Low


How many input trays does this printer have?

Trays can be renumbered to allow for larger capacity input trays.

Please print out the menu setting pages and verify the correct paper tray numbers.

Don

May 15, 2009 | IBM Infoprint 1532 Laser Printer

2 Answers

CONFIG PAGE(S)


pressing the up and down arrow keys at the same time should unlock printer, take printer offline first.

Aug 25, 2008 | IBM Infoprint 6500 Matrix Printer

1 Answer

Clearing message after "replace photoconductor kit" message came on


To reset the photoconductor page count:
  1. Turn off the printer.
  2. While the printer is off, press and hold the Select (pattlnk_1262005_1956-enus20772_selectbuttonicon_t64x_en_us.gif) and Return (pattlnk_1262005_1950-enus21096_returnbuttonicon_e340e342_en_us.gif) buttons on the operator panel.

    pattlnk_1262005_208-enus21096_oppanelbuttons1_e340e342_en_us.gif

  3. While keeping both buttons held down, turn the printer back on. Keep holding down both buttons until the printer screen displays Performing Self Test or CONFIG MENU.
  4. Release the buttons when you see either of these messages.
  5. If Reset PC Cnt does not then appear on the screen, press the left or right menu button until it does.

    pattlnk_1262005_2017-enus21096_oppanelbuttons2_e340e342_en_us.gif
  6. Press the Select button once. The message Resetting PC Cnt Value should briefly appear on the screen, indicating that the photoconductor page count has been reset.
  7. When the display shows CONFIG MENU again, power off the printer.
  8. Wait five or more seconds and then power the printer back on. NOTE: Do not hold any buttons down when powering on the printer during this step.

    The photoconductor page count should now be reset. At this point, it is recommended that you print a menu settings page to confirm this. Do the following:
    1. With the printer at the Ready status, press the left or right Menu button until UTILITIES MENU appears on the screen.
    2. With UTILITIES MENU on the screen, press the Select button once. A new menu should appear.
    3. If Print Menus is not displayed on the second line of the screen, press the left or right menu button until Print Menus appears.
    4. Press the Select button once. The message Printing Menu Settings should appear on the screen and the printer will print out one to three pages of printer settings.
    5. Look for a heading labeled Cartridge Information on one of the menu settings pages.
    6. Under Cartridge Information, look for the word Photoconductor. Confirm that the level of the photoconductor says OK or is close to 100%.
    7. If the photoconductor is still reading low, try printing 10 - 20 more pages.
    8. Print the menu settings page(s) once more. Confirm that the photoconductor level is now at OK or close to 100%.
    9. If the photoconductor continues to give a low reading, repeat this entire procedure again from the beginning to reset the counter once more.
    10. If the photoconductor reading is still low after two attempts to reset the counter, the printer may require service.

Jul 28, 2008 | Lexmark E342n Laser Printer

1 Answer

Disabling Power Save mode


If you enter the config menu, you can turn off energy conserve. You enter the config menu by turning off the printer, holding the center and right arrow, and powering the printer on. Continue to hold the buttons until you see Performing self test. Then you will see config menu. If you scroll down to energy conserve and select it. You can change the option to off. This will disable power saver.

Jul 01, 2008 | IBM Infoprint 1532 Laser Printer

1 Answer

Can't stop printer form printing this one page over and over...


you might want to check and make sure it's not printing the demo! If that's the case someone just has it in demo mode and holding down the green button while booting might do it!

Apr 26, 2008 | IBM Infoprint 1532 Laser Printer

1 Answer

Lexmark 1532


If the Operator Panel is locked. (Menu's disabled) you need to enter Config Mode to enable the operator panel. Press and Hold the > right arrow and down arrow buttons while powering on the printer. Once in configuration mode scroll to Panel Menu where you can enable it. Exit Config Mode or just power the printer off and back on.

Mar 28, 2008 | IBM Infoprint 1532 Laser Printer

Not finding what you are looking for?
IBM Infoprint 1532 Laser Printer Logo

Related Topics:

328 people viewed this question

Ask a Question

Usually answered in minutes!

Top IBM Office Equipment & Supplies Experts

James Cagle
James Cagle

Level 2 Expert

418 Answers

Toby
Toby

Level 1 Expert

34 Answers

CheckitRight
CheckitRight

Level 3 Expert

1362 Answers

Are you an IBM Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...