Question about Smeg 24 in. DWD612SS Built-in Dishwasher

1 Answer

Dishwasher does not complete the cycle

My dishwasher starts the cycle, usually number 5, but stops after about 20 minutes

Posted by on

  • lockie0 Apr 08, 2009

    mine starts and trips the whole house about 25 minutes into the cycle of programme 4. can eventually finish it after waitng a while and switching the machine back on. tied it on oter programmes too and it has startted doing it with them.

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Repair guy came out and after an hour of taking things to bits and not finding a leak , we managed to identify the problem as originating from a faulty door seal at the top door lock ( it was ever so slightly dented in/warped) which had caused the water to track through the door lock down into the machine and trip the electrics after 30 minutes in the cycle. He'd never heard of this happening before - just my luck!!
Door seal replaced and ( so far) everything working fine.

Posted on May 11, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

What's causing my dishwasher to stop in the cleaning cycle, and how do i fix?


It's probably the switch that is attached to the latch. Could also be the latch itself or the strike.

Sep 25, 2014 | Whirlpool Dishwashers

1 Answer

My LG dishwasher counter doesn't count down


Since you didn't give the model number, I looked at a general user manual for an LG dishwasher. It suggested that if the water is cold, it would take longer to wash the dishes. That suggests to me that a cold water temperature might prevent the timer from starting till the desired temp is reached. Could that be the problem? Could it be connected to a cold water supply rather than hot? Is the hot water set too low?

Mar 10, 2014 | LG Dishwashers

1 Answer

Dmt300


please make this test and fix it. Merry Christmas
Float Switch

The float switch may be hung up and this can cause the dishwasher to be stuck in a cycle.

Timer / Control

If your dishwasher gets stuck in a cycle first try shutting off the breaker for at least 5 minutes if this does not correct the problem you will need to replace the timer/electronic control.
fb1a70c4-1642-41dc-b9b8-6b3d2c5db87c.jpg

Dec 19, 2013 | Samsung Dishwashers

1 Answer

Fault code 20


Try contacting John Lewis for resolution.

Dec 05, 2013 | John Lewis JLDWW1200 Dishwasher

1 Answer

Leaving a white film on everything


Hi, what you are currently experiencing is as a result of dishwasher detergent, combined with mineral deposits from hard water, which in yurn can leave a white film on the inside of the dishwasher.
You have to clean the dishwasher by sprinkling baking soda onto a damp cloth. Scrub the inside of the dishwasher to remove soap scum, grime and mineral deposits.
Pour 2 cups white vinegar into the bottom of your dishwasher. Turn the dishwasher on and run it on a full cycle. Stop the dishwasher halfway through the wash cycle and allow the vinegar and steam to work on the remaining mineral deposits for 20 minutes before resuming the cycle.
Open the dishwasher and dry the interior with clean, dry cloths. Keep the door propped open for 20 to 30 minutes to allow the dishwasher to dry completely.

Hope it helps....

Jun 27, 2011 | Whirlpool Dishwashers

1 Answer

My indesit idl40 cleans everything, but leaves a film? does not seem to rinse?


Hi, what you are currently experiencing is as a result of dishwasher detergent, combined with mineral deposits from hard water, which in yurn can leave a white film on the inside of the dishwasher.
You have to clean the dishwasher by sprinkling baking soda onto a damp cloth. Scrub the inside of the dishwasher to remove soap scum, grime and mineral deposits.
Pour 2 cups white vinegar into the bottom of your dishwasher. Turn the dishwasher on and run it on a full cycle. Stop the dishwasher halfway through the wash cycle and allow the vinegar and steam to work on the remaining mineral deposits for 20 minutes before resuming the cycle.
Open the dishwasher and dry the interior with clean, dry cloths. Keep the door propped open for 20 to 30 minutes to allow the dishwasher to dry completely.

Jun 26, 2011 | Indesit Dishwashers

1 Answer

Dishwasher only runs for 21 minute cycle


I bought and replaced the control board in the door. $145 CAD it took 5 min saved myself $300

May 07, 2009 | Dishwashers

1 Answer

DU1100 Stops mid cycle.


main control cpu unit failing
needs to be replaced

May 09, 2008 | Whirlpool 24 in. DU1100XTP Built-in...

1 Answer

Zanussi ZDT6252 stops 1min into cycle


You need to reset the computer on the bottom. Had the same problem with mine. The Blinking led means the heating element is bad and will not operate.

Dec 30, 2007 | Zanussi 23 in. ZDT6252 Built-in Dishwasher

Not finding what you are looking for?
Smeg 24 in. DWD612SS Built-in Dishwasher Logo

Related Topics:

342 people viewed this question

Ask a Question

Usually answered in minutes!

Top Smeg Dishwashers Experts

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Starnley Johnwells
Starnley Johnwells

Level 3 Expert

1029 Answers

oysterman

Level 1 Expert

25 Answers

Are you a Smeg Dishwasher Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...