Question about Bernina Sewing Machines

1 Answer

Bernina Artista 200

I have had the Artista 200 since new and recently it blew the fuse, the dealer replaced the fuse once again after it blew it a second time. Now concluded, its the mother board that needs to be replaced.
little more info: the machine is connected to a APC UPS.
Is there any experience out there with with this model "blowing the fuse"

Any thoughts?
tks
grayston

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 202 Answers

I suspect there is a wire cable pinched between the covers and the frame somewhere. Someone needs to inspect all the wires and possibly replace a cable or maybe one of the plugs isn't seated correctly. The motherboard (S-print or L-print) could very well be bad but only because it got shocked in the process. Static will do this if the person is not grounded with a wriststrap while servicing. Or a plug or cable bad or pinched.

Posted on Jan 08, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Need Bernina Artista 200 manual ASAP


You can download a manual from the Bernina web site.

BERNINA Support Machine and Accessories Finders and Software Support...

Then go to "Search Support Info for Bernina Models"

BERNINA artista 200 Support BERNINA

..

Jul 13, 2016 | Bernina Sewing Machines

1 Answer

Why doesn't it recognize that an embroidery hoop is attached?


Perhaps this will help:

My Embroidery Haven View topic Bernina 180

Bernina artista hoop not recognized

You can also try contacting the Support group at Bernina.com or your local Bernina dealer

...

Feb 24, 2016 | Bernina Artista 180

1 Answer

My Bernina Artista 200 freezes up after working for an hour and won't move? the tech changes out the most expensive card $450!! and still same problem.


I hope you did not pay for it ! IAs a Techie, it is our responsibility to correctly diagnose. If he wasn't sure, it should have been sent to Bernina where it would be fixed!

Oct 07, 2013 | Bernina Artista 180

1 Answer

Fuse blew on bernina 180 artista sewing machine advised to go up to a 5 amp fuse blew another part now has a small burn hole in it Please refund my $30 I may need a new circuit board


Herein is a lesson to very firmly learn .... fuses are rated for a reason .... NEVER, EVER put a bigger fuse in if the last one blew, because it blew for a reason. A fuse is there to protect your equipment from damage and for your safety ... if you put a bigger fuse in and your equipment gets damaged as a result, you've only yourself to blame. Just be thankful it didn't burst into flames and if you think I'm being dramatic ... dont ... fuse 'abuse' is one of the biggest causes of house fires. Whoever 'advised' you to do this wants his/her ears bashed and if you paid money for this advice, you desrve it all back plus the cost of repairing the damage it caused !!!

Jul 31, 2011 | Bernina Artista 180

3 Answers

Bernina 200 e freezing


Ask them to replace the I/O print and make sure its upgraded to the latest firmware, also have them check or replace the motor depending on when you bought your machine these could be under warranty.

Jun 18, 2009 | Bernina Artista 180

2 Answers

Dongle


Hello. No, the only way you are going to get this to work is to replace the software with new ones, as all software come with different dongle numbers. The dongle numbers are specifically for the software that you have, you can't even change dongles. Can you get in touch with the seller to give you the dongle? I have a set of Cracked software for the BERNINA ARTISTA 180 that I can copy for you for $200, which you don't need a dongle for. Email me on: lfr6@bigpond.com I have a BERNINA ARTISTA 180 as well and this is the software I run. RRP for the VERSION 3 and the CPS software is $4500.00. Thanks. Lawrence

May 02, 2008 | Bernina Artista 180

1 Answer

Bernina 200 e freezing


I took my artista 200e to my local bernina dealer and my machine needed to be upgraded - it hadn't had a software upgrade since new. I got it back today ad it's now working fine

Oct 28, 2007 | Bernina Artista 180

Not finding what you are looking for?
Sewing Machines Logo

Related Topics:

303 people viewed this question

Ask a Question

Usually answered in minutes!

Top Bernina Sewing Machines Experts

andika2000

Level 1 Expert

28 Answers

Bargain Box
Bargain Box

Level 3 Expert

1388 Answers

Iron
Iron

Level 3 Expert

3018 Answers

Are you a Bernina Sewing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...