My hanns g hc174d monitor will not display anything

Question: Does Hanns.G provide Windows (or other) drivers? Answer: Answer: No Operating System specific drivers should be necessary. Hanns.G monitors comply with DD2B plug & play standards.
In other words hans doesn' t need drivers, it is plug and play
Terry

might wanna check the cable
and make sure you are on the right video setting on the monitor Ie. dvi,vga,comp,

If this is a "Windows" problem, try the following.

Press and hold "ctrl" + "alt" then press the up arrow.
Screen should revert to normal.

install an AGP card into an AGP slot because internal display card does not support high resolution because of insufficient memory . use 8X AGP card for better result . then you can see high resolution ,3D games ,and movies .

Try replacing the VGA cable if it is not hard wired to the screen. Check that the CPU is not sending an out of range signal (i'e. To Low / To high) Hope this may help.

This sounds like a claim. Give it back to your seller.

That once happened to my LCD screen. I had to send it to the supplier for a fix. If it's still under warrenty, try sending it back for a replacement.

Dear Andy,
Try surfing at www.techtree.com
May be will be to help you.

HI,

I'll let you know soon...

the possibility is that with main board resistor or capacitor burnt.