I have a wharfedale WH-180 in car sterio and the usb conection wont work it keeps giving me error msg when i try to plug in my (same brand ) mp3 player.... ????? i have tryed several diferant usb leads and i have tryed other (my friends) mp3 players (the other player worked) and my mp3 has been in my friends car and worked fine????
It appears this stereo is compatible with a limited number of mp3 players. I had the same problem with my Ford Edge Sync option. See if you can get a list of compatible players from the manufacturer/ dealer. If not, try different mp3 players until you find one that works reliably and purchase one.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
It's unlikely that you're doing something wrong. Did you buy this DVD player as one that is supposed to support connecting hard drives? If not, then the player probably doesn't support connecting a hard drive.
Our problem was that we could not get picture on the tv screen but it got sound.We tried to solve it using different techniques like the setup,video source,function keys pressed on remote control by trial(only assumed) and error as we could not see the screen and I used scart with every conection but three point pin was free so I put only one pin in video out put and at that moment I could see the picture on tv.
If you have access to the 8 pin plug and have a voltage tester check each pin with the ignition on. Once you have found the pins that have voltage see which one goes off w/ign. and which one does not. The one that goes off cut it about 2-3 inches from the plug and cap the end of the wire that was going to the plug. With the wire from the plug remove 1/2 inch or so of the insullation and find the pin that did not go off w/ign and skin that wire back about 1/2 inch and apply the other wire and tape up. this should do it.