I don't know my wifi password...

you don't need a signal booster. Instead what you need is a WIFI signal repeater. This device basically captures your router's signal and repeat it to other devices. Basically place is somewhere between the router and your computer.

There are many out there but here's a cheap one on ebay

http://www.ebay.com/itm/like/122201090687?lpid=82&chn=ps&ul_noapp=true

Westell routers have an IP of 192.168.1.1
Type that in the address bar of your browser to be able to access your router. The login for most westell is:
Username: admin
Password: password Then this will give you access to setup your router with security which will allow you to set a password.

Admin/password should take you in.
This 7501 is preconfigured to be a wireless router. You should be able to directly connect it to Internet (Cable/DSL modem) to Wan port and use the details of Wireless access in the back of the modem to get connected. By default it is setup to WEP and the access details are on the back of the Westell 7501.
Its available for 19.99 on VErizon site now.

sometimes the default gateway is not always 192.168.1.1 sometimes it is actualy your ip adress for example 192.168.0.1 but that won't always work so go to command prompt and type 'ipconfig" and press enter first try your ip and then try the default gateway... for any more help please pm me for any more help...

there might be a problem with the Linksys router, the Westell 6100 should be 1st set to bridge mode in order for your router to be connected to it. or there could also be a proble on the Verizon server.

Actiontech routers should use the username/password combination of admin // password. If those aren't working, you or someone else, may have changed the default username/password of the router. In that case, you either need to figure out what was set or use the little red button on the back of the router to reset the router to factory defaults. Once that's accomplished, you should be able to use the password combo above.

It's possible you are connecting to a neighbor's unsecured network by mistake. Have you verified that you are actually connecting to your own network?

You can try the link below and see if you can get the default password..

http://www.routerpasswords.com/

if i were to guess you are probably a PPPoE user with a dynamic IP address.

possible config

the default password for your westell 327 is username: admin and password: password, the admin admin combination is what usually isp providers such as verizon tells you to put in after configuring it for the first time. 192.168.1.1 is the url add for you to be able to access your westell 327. after accessing your modem you can find the WEP key below the modem, after enabling the security of your network the WEP kep is your default security password