My razor got wet now my key pad light stays on all the time.

pop the case open and dry it off inside, let it sit open in a warm room for 24 hrs so the residual moisture can evaporate.

if that doesn't fix it, time for a new fob as the circuitry has probably shorted the electronics

sir just go to your neareas mobile shopee

******** then

To turn on Lock:
Press and hold Heat Dry for at least 4 seconds. The Locked light
glows. If you press any pad while your dishwasher is locked, the
light flashes 3 times.
To turn off Lock:
Press and hold Heat Dry for at least 4 seconds. The Control Lock
light turns off.

Hate to say it, but your phone is on the way to its death. I've had two RAZRs die on me, and both showed similar symptoms before they went down. It's a combination of the ribbon wire that connects the screen to the keypad half of the phone (causing the power problems) and the open/close sensor on the phone not realizing you've shut the phone (which is why it's keeping the T up on the screen). If you have warranty coverage on it, move all your contacts to your SIM card, send any pics you want to keep to your email address with mms messages, and then go show them the problems. They should give you a new phone.

you just have to change the key pad and dry the inside of the phone.

it shows that you are having flex cable issues - common problem with the v3. you would have to bring it to a local repair shop or order a keypad flex and button flex cable to do yourself.
the parts are about $15-40 and a shop will charge about $25 to install

if all else fails contact me and we can help arrange it.

HAS IT BEEN WET? IF SO OPEN BATTERY DOOR AND REMOVE BATTERY THEN POUR RUBING ALCOHOL NOTE MUCH THEN VACUME NOW PLACE IT UNDER POWERFUL FAN OVER NITE.TRUST ME IT WORK'S...

yes, if your phone gets wet dry it out before turning it on. once dried if still not working properly take to repair shop or replace keypad yourself