Question about Kenmore 25842 Top Load Washer

1 Answer

Kenmore Washing Machine. ......Model 25842400

I have a two yr. old Kenmore washing machine, model number 2584200. The porcelain tub already is already rusting away within the little drain holes and leaves rust marks on my clothes. When I received the washer (and I purchased a Kenmore dryer at the same time), my husband was home to receive the new appliances, and he did not receive any manuals for the brand new appliances. Due to the fact that I need the manual for the washer....I am told that I will be billed $30 for two manuals if I chose to order them from Sears. Does anyone know of an online source that has the manuals that you can download for free? I have yet to find one and I really don't feel like giving Sears any more money as I already have to pay money for a new porcelain tub installation. With a lot of work I was able to get them to at least cover the tub under warranty and that wasn't easy!!!! Thanks for any help. Karen

Posted by on


1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

You can go on to sears website to Manage My Home and pull up your manuel for free. Just have your model number.

Posted on Sep 24, 2009


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer


If Sears in Santa Rosa could not help you with the purchase of a replacement washer, maybe you should consider buying something other than a Sears machine.

Nov 06, 2013 | Kenmore Washing Machines

1 Answer

I have an old Lady Kenmore washing machine that for the past couple of months now will not dispense water into the drum for a washing cycle. I have to manually fill up the tub with water and when the

You will need to replace the "water inlet valve". Se if you can get a part number off the valve. I will need that number or the complete model number to point you to the correct part.

Nov 27, 2012 | Washing Machines

1 Answer

Kenmore elite washing machine is causing rust spots on clothing.

You have a chip in your inner tub where yor clothes are washing. Find the spot and get some porcelain repair at the hardware store and cover the chipped spot.

Aug 21, 2010 | Kenmore Washing Machines

1 Answer

Bought used washer porcelain tub finish is worn off in bottom

get rid of the machine
cant imagine a machine that old really cost that much.
pocelain is baked on and is glass so any edges will catch and destroy cloths

Oct 08, 2009 | Washing Machines

1 Answer

Balance spring fell off washing machine. Where

Check the Sears parts site for diagrams of all the major components. Replace the model number shown (11020802990) with your model number (found on cabinet when you open the lid)!retrieve.pd?pop=true&modelNumber=11020802990

Look at the diagram for the machine base and you should see the springs and where they connect.

Sep 14, 2009 | Kenmore Washing Machines

1 Answer

Kenmore washing machine makes a squeeking noise

Sounds like you have something between the tubs. If it only does this in the spin cycle, I would look for something between the tubs
Please rate solution if helpful

Aug 24, 2009 | Kenmore Washing Machines

1 Answer

Tub leak on a Kenmore Washing Machine Model

you could probalby get away with a marine epoxy to repair thecrack (depending on size) , althouth replacing the tub would be the best "feel safe" --- "no longer worry about possible floods". buthte cost and time to switch the puter tub is problably cheaperto buy new machine

Mar 24, 2009 | Kenmore Washing Machines

1 Answer

Kenmore Washing Machine - no cold water coming in

most likely cuase would be the inlet valve
you would need the complete model number to make sure you get the right part for that unit.

Feb 23, 2009 | Kenmore 46462 Front Load Washer

1 Answer

Washing Machine

The model number will be located under the lid along the wash tub opening. Post back with your COMPLETE model number and I can see if I can locate a manual for you.

Jul 28, 2008 | Kenmore 24032\24036 Top Load Washer

Not finding what you are looking for?
Kenmore 25842 Top Load Washer Logo

384 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kenmore Washing Machines Experts

Sal De

Level 3 Expert

2694 Answers


Level 3 Expert

5651 Answers

 Brian Main
Brian Main

Level 3 Expert

467 Answers

Are you a Kenmore Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides