Question about Toshiba Estudio 200L Copier

1 Answer

Estudio 352 is not help to take out printout from computer

Our machine e studio is working properly for the past 11 months. now it is not given any printout from my computers. If printing command given just one light for print in the machine panel displays but printout is not coming. But in the print log statement it displays the computer machine name but print page displays only 0.. my office work is jamed due to this mistake. I am registered in the customer care of HCL(Chennai, India) of the Toshiba supplier. but they are not helpful to me to rectify the mistake.. Please give the suggestion to recfify the mistake

Posted by on


1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.


    An expert whose answer got voted for 500 times.

  • Toshiba Master
  • 990 Answers

Hello sir; When you make copy does it print? if there also no print out you better check the corona wire (charge & discharge) it should take care of you, if still don't work let me know.

Posted on Jan 07, 2009

  • Shakil Barua
    Shakil Barua Apr 19, 2018

    Same problem, Don`t work it,
    plz help me



1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Toshiba estudio 353 frimware

try this link,when you goto this link scroll down the page and read before you download to make sure it is what you are after.
Toshiba copier firmware download
or try this link.

Dec 23, 2016 | Toshiba Office Equipment & Supplies

1 Answer

E studio 352 unable to print, works well as copier, admin panel and log is accessible on network but does not print, no error

check same IP is given elsewhere remove RJ44 while ping is on if still replay is on,then change the IP no.

Feb 06, 2014 | Toshiba e-STUDIO 352 Black and White...

1 Answer

Toshiba estudio-352 "can't find HDD data" error

go to toshiba website and look for tech support and email the question to them they should get back to you asap.

Dec 26, 2012 | Toshiba e-STUDIO 352 Black and White...

3 Answers

How make printout from a toshiba e studio 232 photocopier without using a original dongle, need a permanent solution

It cannot be done without the dongle.
But u can try the trial period, once the trial period is almost reach, u can try update the machine firmware. But not sure whether it can work or not...

Oct 05, 2011 | Toshiba e-Studio 232 Black and White...

1 Answer

I have problem with my toshiba estudio 352. it hangs during work somestimes and stop working. nothing work at lcd.


1)Please switch off the machine, while holding down the 0+8 buttons please switch the machine on.
When the machine is in test mode input 690 and press the start button
The machine will ask if you want to continue, please continue, oncet the machine is finished it will ask you to reboot the machine.
2)If the problem persists it could be that the firmware has to be updated, or the hard disk drive is faulty and needs to be replaced.

I hope this helps somewhat

Apr 18, 2011 | Toshiba e-Studio 350 Copier

1 Answer

It is requested that this office is maintaing a Toshiba Estudio-352 which is not working properly. we are facing following problems:- 1. Delay in instalation process when we start the machine. 2....

the hard disk drive needs to be replaced but first do -08-694 to test the hdd and then do -08-690 and format the hard drive or it could also be the laser unit but that is only in extreme cases

Mar 05, 2011 | Toshiba e-STUDIO 352 Black and White...

1 Answer


U can download via below site:

Jul 13, 2010 | Toshiba e-STUDIO 352 Black and White...

6 Answers

I want reset my estudio 163

Press *+1+3 and power on the machine.

Nov 29, 2008 | Toshiba e-Studio163 Copier

1 Answer

Printing problem with Toshiba Estudio160

U need to make sure the cable is connected properly and working.
Try to reinstall the driver also.
If still cannot, u can try reset the machine by pressing *+1+3 and ON the machine.

Nov 28, 2008 | Toshiba E-Studio 160 All-In-One Laser...

Not finding what you are looking for?
Office Equipment & Supplies Logo

Related Topics:

257 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toshiba Office Equipment & Supplies Experts


Level 3 Expert

653 Answers


Level 3 Expert

2237 Answers

Branko Djurdjevic
Branko Djurdjevic

Level 2 Expert

103 Answers

Are you a Toshiba Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides