Question about Memorex (278010300003) Internal DVD Drive

1 Answer

Missing cdrom drive

My cdrom drive is missing on "my computer" I installed a memorex DVD drive and put it as the slave to my PC CD drive. The LED light is on but the icon in my storage is not there for the DVD Drive but only the originial CD drive icon. I can't access my DVD drive at all. I don't know what to do? I put in a CD and then a DVD into the DVD drive and nothing happens? Its useless!

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

The triggers determining the slave was set to master with the CD rom drive as well...so I had two master drives...kind've stupid. Everything is now working properly!

Posted on Dec 30, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

I dont have cd..what can i do to have acd rom?


Hi,<br /> <br /> You can download CD Rom via below mentioned link.......<br /> <br /> <a href="http://www.softpedia.com/get/CD-DVD-Tools/Virtual-CD-DVD-Rom/Virtual-CDROM-Control">http://www.softpedia.com/get/CD-DVD-Tools/Virtual-CD-DVD-Rom/Virtual-CDROM-Control</a>-<br /> <br /> <br /> Please post your feedback and Vote if the problem resolved as per your satisfaction.

Aug 30, 2010 | Compaq (138178-001)...

2 Answers

I need drivers for a memorex internal dvd rom 16x Model MRX-210L-v1HM61 I think the part number is 32023254


If you have your Resource CD, you should install it and run the drivers tab.
If you do not have the resource CD, go to Dell's support site for this GX270. You can download the drivers there. You will be looking for the chipset driver and the IDE controller drivers. The CD drivers are firmware.

Mar 27, 2010 | Memorex (32023254) Internal DVD Drive

2 Answers

Two DVD Burners not regestering.


Try this - step by step how to get cdrom back.

Aug 22, 2009 | Computers & Internet

5 Answers

Dell xps m1330 dvd drive will not eject cd inside


Im a dell tech, and i hate those cdrom styles, but, that is what the consumer wants, so we make them. Try starting the machine, then press F2 to enter the BIOS. once in the bios, press the eject button. listen for any noises, (an attempt to eject). if you hear a sound, it means the drive should be capable of ejecting the disc, and perhaps the disc has not seated correctly. If the disc will not eject, you must contact Dell. This is from the DELL dcse site: " Optical Drive The XPS M1330 has a slot-loading optical drive instead of a conventional tray-loading module. There is no mechanical eject mechanism for the drive to eject stuck discs. This means you must replace the drive if a disc gets stuck in the drive. After replacing the drive, disassemble the old drive to remove the disc for the customer."

Jul 21, 2009 | Dell (0F146) Internal DVD Drive

2 Answers

How do you replace proprerly a CD/DVD Drive?


HI there

I belive what you have done is ccaused a conflict on the ide channel that the dvd is on you should check the jumpers on the back of your new device and match it with the setting from your old cd.

you have three options master , slave . or cable select (cs) you can only have one master or one slave on each ribbon cable .

by what you are saying the second device on that channel must be a hard disk if you dont have your old cd drive check what the hdd is set on ie master then set your dvd to the oposite ie slave .

if your hdd is set to (cs) then also set your dvd to (cs)

this should get you going

Regards Al "alstech"

May 25, 2009 | Computers & Internet

2 Answers

Dvd rom not detected


when you installed it, did you put it on the same ide cable as another drive? if so 1 will need to be set to slave and 1 to master. that can be done from the black pin on the back of the drive

Mar 23, 2009 | Lite On SOHD - 16P9S Internal DVD Drive

1 Answer

My dvd and cdrom in Compaq Presario R3000 quit working. Help!


Unfortunately these devices will fail.
A new one will cost in the $20-30 range and is easy to install.
Good luck!

Mar 20, 2009 | Compaq 350831-001 - Presario R3000 Series...

1 Answer

Computer shuts down on inserting disc


I have just fixed a computer with a similar problem. The owner installed a new DVD burner (a SATA drive) and every time he inserted a CD or DVD disc, the computer shutdown (mostly, because the front LED was still on and the CPU fan too, everything else just turned off [drives, PCI cards]). It happened in Windows, in Linux (Ubuntu) and even in the BIOS screen, so I discarded an OS problem. Also happened while booting if a CD or DVD was already inserted in the unit; as soon as the drive LED blinked, the computer crashed. After checking the obvious, I did three final tests:

1) try the DVD unit in another computer (it worked);
2) try the DVD unit with the power connector only, with the data cable disconnected (it shutdown);
3) try the DVD unit with the power connector from and external power supply, with the data cable connected (it worked).

By this point, it was obviously a power supply problem. I checked the power supply unit (PSU) and discovered it was pretty small (250 W). So I installed a more powerful one (350 W) and then it worked.

I checked with a wattmeter and it seems this DVD drive increased the power consumption by 25 watts when started to spin the disc. I really don't know if that is normal (taking 25W to start spinning the disc) or if this drive has some defect, but it seems the previous PSU could not provide that extra power and shutdown some of its output (but not all).

So, if you have this weird problem, maybe checking the power supply and testing with a bigger one may help.

Regards,

MV



Jan 31, 2009 | LG (GDR-8162BI) (GDR8162BI) Internal DVD...

2 Answers

2 burners on win2000


window 2000 could be a probable cauuse.You could try the following. Update windows by installing the latest hot fixes this would most probably solve the problem if the problem is in windows. if the drives show up in device manager. boot you PC in safe mode and uninstall the drivers of both DVD drives.and reboot normally. If this doesnt work let me know your DVD drive make and model.

Jun 06, 2007 | AOpen DVD1648L (750519138717) DVD Drive

Not finding what you are looking for?
Memorex (278010300003) Internal DVD Drive Logo

Related Topics:

300 people viewed this question

Ask a Question

Usually answered in minutes!

Top Memorex Computers & Internet Experts

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

Jax Planet
Jax Planet

Level 2 Expert

921 Answers

Gareth Cockram
Gareth Cockram

Level 3 Expert

657 Answers

Are you a Memorex Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...