Question about Whirlpool Duet GHW9150P Front Load Washer

1 Answer

Error code F1

F 1 what is the problem?

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 15,935 Answers

F01 - There may be an internal problem with the control, attempt a Hard Reset.

Hard Reset - In some cases the control can be non-functioning or may not accept activation from the control panel. To clear and restart the control follow the these steps:

* Unplug or turn the circuit breaker off for 30 seconds.
* Reconnect the unit to the power source by turning the breaker back on or plugging the unit back into the wall outlet.
* Press the Pause/Cancel/Stop button twice to clear the "PF" in the display.
* Start a short cycle to check the operation of the machine by selecting a cycle and pressing and holding the start button until the machine starts.

The F01 generally indicates a failed electronic machine control board.
This error code can sometimes be caused by a glitch or power surge through the electrical lines.
You may be able to clear this code by unplugging the washer for 5 minutes.
If the code returns after plugging the washer back in, then the electronic machine control board will need to be replaced.

The procedure for accessing and replacing this control board is shown in this image...

http://media.fotki.com/1_p,wkwdftgtbkdgfrwxgtqsskgwtqkq,vi/ksrttqdqrxkssrqtgsd/1/1303472/5961857/image12917img-or.jpg

Be sure to unplug the washer before accessing internal components.
When you access the control board, I recommend transferring the wires from the old control board to the new replacement control board one connection at a time.
Once you have all of the wires transferred, remove the old control board and mount the new control board in the washer.
Reassemble and test the washer.

The "F01" error code indicates a communication error between the Central Control Unit (CCU) and the EEPROM onboard the CCU.
The "F01" can also be displayed if the onboard "Pump Driver" fails to activate.
Generally in order to correct this failure will require replacing the CCU.
There is no way to test and verify if the control board has failed.
The technical data sheet basically states to replace the CCU.

http://media.fotki.com/1_p,wkwdffkrdwtbgwsxgtqsskgwtqkq,vi/ksskgsfwrxksrttqdqr/1/1303472/5961857/image12923img-or.gif


Thanks for using FixYa - a 4 THUMBS rating is appreciated for answering your FREE question^%$#@

Posted on Sep 29, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Electrolux dish washer will only drain has code ' 30


water level inconstancy, hence it trying to drain

Electrolux Dishwasher Error Codes - How To Clear - What To Check ...

removeandreplace.com/.../electrolux-dishwasher-error-codes-how-to-clear-what-to-ch...
  1. Cached
Feb 8, 2016 - Electrolux Dishwasher Error Code 30. Inconsistency between level on electronic pressure switch and level on anti boiling pressure switch.

Frigidaire Dishwasher Error Codes - What To Check - How To Reset ...

removeandreplace.com/.../frigidaire-dishwasher-error-codes-what-to-check-how-to-re...
  1. Cached
Feb 18, 2016 - If your dishwasher finds, sees, or detects a fault or error in the system, it will show an error or fault code. ... Frigidaire Dishwasher Error Code = i30 ...... February 9, 2016; Electrolux Dishwasher Error Codes - How To Clear ...

my electrolux dishwasher is giving me the error code .30 i - JustAnswer

www.justanswer.com > ... > Appliance Repair > Float Switch Questions
  1. Cached
  2. Similar
Question - my electrolux dishwasher is giving me the error code .30 i - CV. Find the answer to this and other Appliance questions on JustAnswer.

electrolux i30 Dishwashers Questions & Answers (with Pictures) - Fixya

www.fixya.com > Forum > Tags > electrolux i30
  1. Cached
  2. Similar
Electrolux dishwasher ESF6242, 911 236 182. Before the program was complete, the drain pump went into constant operation and the Error code i30 flashes, ...

how to mend it .com - electrolux dishlex error code 30? - Free repair ...

howtomendit.com > Kitchen Appliances, Dishwashers
  1. Cached
  2. Similar
Free repair help - electrolux dishlex error code 30. ... Is there a way to get to the base to empty the water without pulling the entire dishwasher out? Deb Electrolux dish washer will only drain has code 30 Google Search

Dec 01, 2016 | Electrolux Washing Machines

1 Answer

Error E1 for washing machine


Lots of info on E1 for different makes.

  • How to repair a Samsung washing machine with error code E1 ... https://www.quora.com/How-do-I-repair-a-Samsung-washing-machine... How do I repair a Samsung washing machine with error ... If your Samsung Washing Machine is showing error code E1 then ... How do I clear bosch washing machine error ...
  • E1 error in washing machine? ' Yahoo Answers https://in.answers.yahoo.com/question/index?qid=20131129013237AA7oiKP
    • RESOLVED
    • 7 POSTS
    • 6 TOTAL ANSWERS
    2013-11-29 · E1 error in washing machine? ... Haier washing machine error code E1? LG Wave Series Washer LE error message? Washing machine error code? ...
  • My washing machine is displaying an error code. What does ... www.samsung.com/my/support/skp/faq/1033803 My washing machine is displaying an error ... E1. Water supply error. ... · Check that the level of the drain hose is not lower than the base of the washing machine.
  • Related searches for Error E1 for washing machine
  • Samsung Washing Machine 4E and E1 Fault - Help & Advice https://www.northlondonappliancerepairs.co.uk/error-codes/samsung...
    • 4.3/5
    • 46 RATINGS
    Samsung Washing Machine 4E and E1 Fault. Samsung washing machine Not filling in allocated time error code 4E and E1 Fault.
  • Help & Troubleshootings - Haier ZA Products Website www.haier.com/za/help_and_troubleshootings/faq/washing_machine Help & Troubleshootings. ... Too much water in the washing machine ... Error Code-control panel display "E1" Question : Error Code-control panel display "Lock"
  • Samsung washing machine error code 4E and E1 Fault Not ... www.youtube.com/watch?v=cFlnxeB0P0g
    • BY HOW-2-REPAIR.COM
    • 9 MIN
    • 19K VIEWS
    2015-11-24 · Video embedded · ... machine-error-code-4e-and-e1-fault-not-filling-in-allocated-time/ Samsung washing ... Samsung washing machine error code 4E and E1 ...
  • Samsung washing machine error code 4E, E1, Fault Not filling www.how-to-repair.com/help/samsung-washing-machine-error-code-4e... Samsung washing machine Not filling in allocated time error code 4E and E1 Fault This is essentially a fill timeout error which will normally mean that either the ...
  • Hoover error code E1 - White Goods Help www.whitegoodshelp.co.uk > ... > Washing Machine Error Codes Hoover error code E1. ... You need to watch the washing machine to see when it aborts to get an idea which of the three areas to look at.

  • Jul 01, 2016 | Washing Machines

    1 Answer

    Fh error code wirpool duet washer


    Display shows F20 or FH - Front-load washer ' Whirlpool ...

    https://www.whirlpool.com/...fh-front-load-...

    Whirlpool Home AppliancesQuestion: Display shows F20 or FH - Front-load washer. Answer. Image. or. Image. or. Image. This error code indicates a water supply problem. Are both the hot ...

    whirlpool duet error code FH - Appliance Repair Forum

    forum.appliancepartspros.com > Appliance Repair Help > Washer Repair

    Jan 5, 2009 - 10 posts - ‎1 author
    ... Repair Help > Washer Repair » whirlpool duet error code FH .... FH No water detected entering machine or Pressure switch trip not detected. Whirlpool Duet diagnostic code C:03 error code FH
    1 post
    Dec 5, 2014
    Whirlpool Duet Washer HF Error Code
    3 posts
    Jun 10, 2013
    FH Error Code on Whirlpool Duet Washer
    2 posts
    Mar 11, 2013
    FH error code
    9 posts
    Sep 13, 2008
    More results from forum.appliancepartspros.com

    Stumped on error code FH for Whirlpool Duet front load washer .


    Jan 08, 2016 | Washing Machines

    1 Answer

    Error code 141. How can I fix it?


    Bosch error code 141 Washing Machines Questions ... - Fixya

    www.fixya.com > Forum > Tags > error code 141 > Washing Machines
    Bosch washing machines error code 141 related questions and answers. Ask your Bosch questions. Get free help from washing machine experts.

    error code 141 Washing Machines Questions & Answers ...

    www.fixya.com > Forum > Tags > error code 141
    Washing Machines error code 141 questions and answers. Ask your error code 141 washing machine questions. Get free help, advice & support for popular ...

    Zanussi Washing Machine Fault Code Reset - iFixit

    https://www.ifixit.com/...Washing+Machine+Fault+Code.../34977

    iFixitMy Zanussi Washing Machine hasn't been working properly for a while. then it stopped spinning and emptying, then wouldn't go through the programmes at all.

    [PDF]TOP LOADER Automatic Washing Machine - you


    Dec 29, 2015 | Washing Machines

    1 Answer

    F-24 error code so I ran a clean washer cycle, and the laundry room is now flooded.


    what's f24 code? - Kenmore Elite HE3 Washing Machine ...

    https://www.ifixit.com/Answers/View/85549/what's+f24+code

    iFixitAug 21, 2015 - Aiman, The F24 error code indicates a water temperature sensor reading that is ... The Kenmore Elite HE3 is a washing machine by Kenmore.

    F24 Error Code on My Kenmore Washer ' eHow

    www.ehow.com > Home
    F24 Error Code on My Kenmore Washer. Kenmore washing machines have several high-tech features, such as a stain treatment option, reduced energy and ...

    Kenmore HE2 Plus Front Load Washer F24 error code ...

    www.fixya.com > ... > HE2 > Kenmore HE2 Plus Front Load Washer
    ...error code F24 I have a Kenmore HE2T washer and I keep getting an F24 error on it.. I have no idea what is means can't find the manual help!!! The "F24" error ...

    I have a Kenmore HE2T error code F24 - Fixya

    www.fixya.com/support/t3608391-kenmore_he2t_error_code_f24
    Dec 9, 2009 - Posted on Dec 09, 2009.

    Dec 06, 2015 | Kenmore HE2 Plus Front Load Washer

    1 Answer

    Wme8227s. What does code E18 indicate?


    Beko Washing Machine ' WMA Series ' Error Codes

    www.ukwhitegoods.co.uk/.../fault-codes/...fault-codes/3623-beko-wma-...
    Feb 6, 2013 - ... Fault Codes. Beko WMA Washing Machines With Display ... BekoWMA Series Washing Machine Fault Codes. These fault codes are ... E18 ...

    UK Whitegoods • View topic - Beko WME7247W showing error code e18 ...

    www.ukwhitegoods.co.uk/.../washing-machine.../beko-wme7247w-show...
    Jun 19, 2011 - Hi, does anyone know what error code e18 is on a beko wme7247wwashing machine? thanks. User avatar louisebaxter: Whitegoods Newbie Beko wme7247w dc module burnt out
    Apr 27, 2014
    Bosch WAS24460GB showing error F:57
    Sep 28, 2013
    beko washer error code
    Aug 18, 2012
    Samsung B1415J showing error code EA ...
    Jan 9, 2012
    More results from www.ukwhitegoods.co.uk

    Oct 30, 2015 | Beko Washing Machines

    1 Answer

    What is CE error code on LG TROMM WM1814CW


    According to page 21 of the owner's manual, the following are known error codes: IE= Water Inlet Error, OE=Drain Error, UE=Unbalance Error, dE=Door Error, tE=Thermistor Error, FE=Overfill due to Faulty Water Valve, PE=Water Level Sensor Error, CE and LE=different Motor Errors, and PF=Power Failure.


    its a motor error
    check the brushes

    Jan 03, 2015 | LG WM Washing Machines

    1 Answer

    What is f4 and f7 error code


    F04 Error code is "Pressure switch jammed on empty"
    F07 Error code is "Heater relay stuck"

    Both would require you to dis-assemble the washer to get to each part for checking / replacing.

    http://www.hotpointservice.co.uk/help-and-advice/error-codes/

    Sep 03, 2014 | Hotpoint Ultima WF860 Front Load Washer

    2 Answers

    Washer stopped with error code f1


    Was the error code F01?
    If it is ther error code means EEPROM ERROR
    A communication error between the Central Control Unit (CCU) and the EEPROM onboard the CCU occurred. and or
    PUMP DRIVE ERROR
    The pump driver fails to activate.
    and or
    MAIN RELAYS ERROR
    One of the main relays is not working properly.

    Could be cause by a power glitch. unplug unit wait 10 seconds and plug unit back in. If code returns replace Central Control Unit (CCU)

    Oct 23, 2009 | Whirlpool Duet GHW9150P Front Load Washer

    Not finding what you are looking for?
    Whirlpool Duet GHW9150P Front Load Washer Logo

    104 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top Whirlpool Washing Machines Experts

    Dan Webster
    Dan Webster

    Level 3 Expert

    8147 Answers

    Richard Roth
    Richard Roth

    Level 3 Expert

    9472 Answers

    Mike Cairns
    Mike Cairns

    Level 3 Expert

    3053 Answers

    Are you a Whirlpool Washing Machine Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...