Question about Delphi NA10000-11B1 GPS Receiver

2 Answers

Delphi NA10000 Losses Power, Turns OFF

My Delphi unit will automatically power off by itself. This happens irregularly, sometimes a few seconds, other times maybe 10-15 min. Ive tried a new power supply, also ac/dc power cord that comes with unit. No Luck. Can anyone shed some light on this. PS Tried also unit not warm to the touch, or left in car heat, exposure. Also tried Cool Unit. Left inside AC in house, Brought out to Car. Thanks GP :}

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.


    An expert whose answer got voted for 2 times.

  • Contributor
  • 3 Answers
Re: Delphi NA10000 Losses Power, Turns OFF

I had the same problem and was able to fix it by finding a replacement cigarette lighter power cord with the same voltage and polarity. Input to cord is 12Volts. Output to GPS is 5Volts, with a positive center post.


PS I need an instruction book and disks (or disk copies) if you know where I can get them. Delphi no longer has them.

Posted on Dec 03, 2008

Re: Delphi NA10000 Losses Power, Turns OFF

This seems to be a common problem with this unit. Mine does the same. current problem seems to be unable to get a gps fix.

Posted on Aug 03, 2007

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


3 Points

Related Questions:

1 Answer

How do i program the garmin to automatically turn off when my car turns off?

There are two ways to do this:
The first is to have the Garmin connected to a power source that is only on when the car is on. When the Garmin looses power, it will warn you and wait a few seconds, then power off.
The second is to purchase the Garmin EcoBoost module so that your GPS can detect when the car shuts off. Your Garmin has to be EcoBoost compatable to use this second solution.

Oct 04, 2014 | Garmin nuvi GPS Devices

1 Answer

Turn signals wont work

have you checked the flasher unit itself its a large round or square block in your fuse panel

Apr 21, 2014 | Delphi 2001 - 2003 Saturn L200 Vehicle...

1 Answer

I have recently purchased the Garmin nuvi 765T and I have charged it and waited to use in the car but after a few seconds of turning it on, it turns itself off after showing the "Garmin" company...

Try to soft reset it by holding the power button for at least 20 seconds till it restarts.

If that doesn't help - try a master reset to factory defaults by holding the lower right corner during startup for at least 20 seconds. This will erase all user data and starts the Garmin in factory default.

If it restart I suggest updating the software to the latest version on

Jul 04, 2011 | Garmin nuvi 765T GPS Receiver

1 Answer

Turns on for a few seconds, then turns off. Cycles on and off.

If your Nuvi won't turn on, it's possible that it's locked up. Try using the reset button as follows.

Nuvi 3xx & 6xx Series: The reset is located on the rear of the unit, underneath the antenna. Press and hold it for at least 8 seconds and then release.

Nuvi 7xx Series: Slide the On/off power switch to the left and hold for at least 8 seconds and then release.

Nuvi 2xx & 2xxW: There are (2) different versions of this series.

Some will have the reset on the bottom, where the decal is. There will be a small flap labeled "reset".

On newer units, slide the On/off power switch to the left and hold for at least 8 seconds and then release.

Oct 22, 2010 | Garmin nuvi 205 GPS Receiver

1 Answer

My gps will not turn on

Hi undten,

I wonder what's going on with all the Garmin reset and failure to powerup problems during the last few must be the water...

Try these steps for powering up and resetting your unit.

The Garmin Nuvi 265 and most other 200 series GPS receivers are normally reset as follows:

The reset button is located on the right rear-backside of the unit. Press a blunt non-metallic object or a cut off toothpick into the small hole and hold for approximately 15 seconds. The unit should do a fresh reboot. Sometimes these GPS units can be reset by sliding the Power key to the left for 10-15 seconds to completely shut the unit down. Then, do the same procedure for 10-15 seconds again, to power it back on.

It would be best to assure the unit has external power, and hopefully a full battery charge, for best results. Also you can download a complete manual from this link for more info:

Let me know how this turns out, and if I can help you further.



Sep 19, 2010 | Garmin nuvi 265 Car GPS Receiver

1 Answer

Unit will not stay powered up. When plugged into DC power adapter, unit will power up but turns off after a few seconds. Unit indicates low battery. Unit had been successfully used during the previous 24...

Check the fuse on your power cord if it has one. Also try using a different power cord, perhaps one for use inside or use a USB cable if one was provided. Borrowing one or using one at an electronics store as a test may also help.

It sounds like the power cord you are using has stopped functioning and your battery is depleted and requiring a charge.

Feb 16, 2010 | Garmin StreetPilot C330 GPS Receiver

3 Answers

Skycaddie turns on by itself

Support reps are paid by their company to KNOW what their device and software can and can't do, does or doesn't do, so if you need support why call them and argue or doubt their assistance. This is what's wrong with over half the people who need/require support.

Your SG2 did not do this, because one, the SG2 DOES NOT have a backlight feature. All SkyCaddies however, do have the ability to power off automatically, and those power off times can be set by certains intervals, within the device. Once turned off, you will need to power it back on, it's that simple. Also, IF your device is plugged into your computer or is charging, it may power on, you are not losing power when this occurs.

Lastly, as a consumer, we want to buy something and have it WORK, bottom line. But there is ALWAYS the possiblity that the device has a problem and may have to be sent in for a repair or a look-at if all troubleshooting is exhausted and the issue is not from user error.

May 14, 2008 | SkyGolf SkyCaddie Handheld GPS Unit

2 Answers

Delph na10000

the on button is the button that looks like a house hold down for 2 seconds

Apr 18, 2008 | Delphi NA10000-11B1 GPS Receiver

2 Answers


"unit turns on and off with the ignition switch, sometimes."

There is something wrong with your power cord or the connection to the cigarette lighter. Your unit should turn on and off with the ignition switch. If the unit is on and doesn't turn off with the ignition switch then your unit is running on battery. If your unit doesn't turn on with the ignition switch then the unit is not getting power from the cigarette lighter.

Dec 28, 2007 | Garmin StreetPilot C330 GPS Receiver

1 Answer

Garmin C330 resets itself

The first problem with it powering itself off is a battery problem. Your battery is not hold a charge.

The second problem with it powering itself on with the power cord attached is a power cord issue. The unit is suppose to automatically power itself on if a power cord is attached to it. This is Garmin way of turning the unit on when you start your car. Most auto cigarette lighter will cut power if the ignition is off, and restore power when the ignition is on.

Garmin uses this to turn the unit on and off. If the unit was being powered by the the cigarette lighter then it say unit is shutting down in 20 seconds after the power is cut.

Jan 21, 2007 | Garmin StreetPilot C330 GPS Receiver

Not finding what you are looking for?
Delphi NA10000-11B1 GPS Receiver Logo

Related Topics:

110 people viewed this question

Ask a Question

Usually answered in minutes!

Top Delphi GPS Devices Experts

Cindy Wells

Level 3 Expert

4719 Answers


Level 3 Expert

56798 Answers


Level 3 Expert

6993 Answers

Are you a Delphi GPS Device Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides