Question about Audiovox Xpress EZ XM Satellite Radio Receiver with Vehicle Kit

Open Question

Xm xpress ez no sound

The receiver displays the station and what is on, but I hear nothing

Posted by on

  • 1 more comment 
  • robb_Revere Jan 28, 2009

    same problem. got a replacement and here i am a week later in same boat

  • Debbieb12 Feb 14, 2009

    was working great, then no sound. I have a signal and I can scroll thru the chanels.

  • Anonymous Mar 24, 2009

    make it 3 - just lost audio - everything else seems to work



Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

What is a tp button on a jvc kd528

TP (Traffic Programme) button
Setting and operating TA (Traffic Announcement) standby mode

When the TP button is pressed briefly in the FM mode, the "TP" indicator is lit during reception of a TP station and the TA standby mode is engaged. TP

When the station being received is not a TP station, the TP indicator flashes. Press
the ¢
in the display, and TP station search starts. When a TP station is tuned in, "TP" is lit.

• If you're listening to a DVD/AUX and wish to hear a TA broadcast,
press the TP button to enter the TA standby mode.
(The "TP" indicator lights up.)


Nov 20, 2016 | Computers & Internet

1 Answer

What is the traffic button for in a 2002 alero

According to the owners manual

TRAF (Traffic): Press this button to receive traffic announcements. The traffic announcement brackets will appear on the display. TRAF will appear on the display if the current station broadcasts traffic announcements. If the current station does not broadcast traffic announcements, the radio will seek to a station that does. When the radio finds a station that broadcasts traffic announcements, it will stop. If no station is found, NO TRAFFIC will appear on the display. When a traffic announcement comes on the current radio station or a related network station, you will hear it, even if the volume is muted or a compact disc is playing. If the compact disc player was being used, the compact disc will stay in the player and resume play at the point where it stopped. INFO (Information): If the current station has a message, INFO will appear on the display. Press this button to see the message. If the whole message does not appear on the display, parts of the message will appear every three seconds until the message is completed. To see the parts of the message faster than every three seconds, press this button again. A new group of words will appear on the display. Once the complete message has been displayed, INFO will disappear from the display until another new message is received. Hope this helps.

Feb 25, 2014 | 2002 Oldsmobile Alero

1 Answer

How to store the radio station in memory

You didn't specify the brand or model number of your receiver, but on most receivers you press and hold the preset button in order to store that radio channel. As soon as the station is memorized (usually around five seconds of holding the preset button) you'll see the display blink or you'll hear a sound.

Jan 25, 2011 | Audio Players & Recorders

1 Answer

How do i program the radio to only give audio alerts for the county in whitch i reside? (sarpy county in nebraska

1. Turn switch on side of radio to "ON".
2. Press "MENU".
3. Press "UP" arrow until "CHANNEL" is displayed.
4. Press "SELECT".
5. Press "UP" arrow until you hear the broadcast of your station.
6. Press "SELECT" to save station selection.
7. Press "MENU" to close menu mode.
To turn Weather/Hazard broadcast on again, press "WEATHER/SNOOZE".

Note you will hear only static on the channels not received in your area.
(FYI - channels are listed 1-7 on the left, and corresponding frequency numbers are displayed on the right side of display.)

At This Point You Will Receive Weather And Hazard Alerts Issued By The NWS.

Dec 24, 2010 | Midland WR-100 Weather/RDS Radio

1 Answer

Auto muting on when on am/fm and no sounds come out. everything else is fine.

That's normal.

The Auto Muting mode mutes the audio output of the tuner if the station is not sufficciently strong to be accurately tuned. Otherwise you would hear all that interstation hash noise.

Press the FM Mode button to change it to Mono if you want to manually tune a hard-to-reach station. It will be in Mono.

Page 26:

Normally select this.
When a program is broadcast in stereo, you will hear stereo sound; when in monaural, you will hear monaural sound.
This mode is also useful to suppress static noise between stations. The AUTO MUTING indicator lights up on the display.

Mar 31, 2010 | JVC RX-D205 7.1 Channels Receiver

1 Answer

No audio through car radio

is your car radio and the xm receiver tuned to the same frequency?

Aug 31, 2009 | Delphi SKYFi XM Radio Receiver

2 Answers

Play station 3 displaying problem

hold down the power button when the ps3 is turned off for 5 or more secs

Dec 20, 2008 | Sony Playstation 3 (PS3) Console

1 Answer

AM/FM receiver

the problem is in your tuner for me it is betwen the IC and the IF transformer. if u cant fix it buy new stereo componet.

Apr 16, 2007 | Harman Kardon AVR 225 Receiver

Not finding what you are looking for?
Audiovox Xpress EZ XM Satellite Radio Receiver with Vehicle Kit Logo

Related Topics:

102 people viewed this question

Ask a Question

Usually answered in minutes!

Top Audiovox Audio Players & Recorders Experts


Level 2 Expert

509 Answers

Chinmay Joshi
Chinmay Joshi

Level 2 Expert

143 Answers

Computer Links

Level 3 Expert

2386 Answers

Are you an Audiovox Audio Player and Recorder Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides