Question about ACE Graphics Tablets

1 Answer

Online writing function for Digimemo L2 doesn't work

Looked at other solutions for VISTA but it doesn't seem to work for my XP64 bit. I went through explore and to the programs 86 folder where ACECAD digimemo executable resides. Did a right click and did a run as administrator but it didn't change the functionality of the online function button. Is there some priviledge or permission that I need to invoke as an adminstrator that will allow access to the online function? How would I go about enhancing or extending the administrator privileges?

Thanks in advance for your help.

Jim LovellFord

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

This is what worked for us: After you click on "run as administrator", you return to the online page and click on the online writing icon.
This immediately synchronizes the paper on the pad and the online page.
Also, you will notice that you can't use the digital pen to click commands in the program when the online writing icon is activated. However, you can still use your mouse or touch pad to click on commands. So, you do have to go back and forth between the pen and the touch pad when the online writing icon is activated. 
Hope this helps.
Kathy

Posted on Jan 25, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I keep ink from spreading when I seal or varnish an art piece on wood?


Several thoughts:
1. Use ink that doesn't run in water.
2. Use a very light undercoat of clear shellac (alcohol based)
3. Use a very light undercoat of clear lacquer (thinner based)

Oct 20, 2014 | Acecad SolidTek Digital Inking Pen For...

1 Answer

Iv lost my driver CD now I cant seem to get it working properly.


use this link:
http://drivers.downloadatoz.com/vendor_uc-logic-technology-corp/hid-tablet-twa60/

Jan 12, 2014 | Graphics Tablets

2 Answers

I have a genius wizard pen 4 x 3, about 5 years old. Can it work with a new computer that has windows 7, 64 bit?


hi, i have the same tablet wizard pen 4x3, windows 7 64bit install the tablet but doesnt work. if you could find a solution please contact me, i'll do the same for you, got this page in my favs for repair stuff..
esmilodonte arroba gmail dot com
peace and be nice

Apr 18, 2010 | Genius WizardPen 4x3 (K941C001) Graphic...

1 Answer

Downloads for digipro WP8060



Graphics tablets
Device driver for
2000/XP/XP64/Vista
Driver 5.01.1
(NEW)
2009.03.05 3.21MB
winzip.gif

Jun 24, 2009 | Manhattan Graphics 8 x 6 (174459)

2 Answers

Need drivers for UC Logic Tablet


Google for: PF1209 Mac driver (you may add UC-Logic, Genius, Pentagram, Trust)  and find the OLDEST available driver. It should be a .pkg file after extracting. 
Install it (it should be the v.1.0 control panel) and then you may install the recent v.1.24.2 driver over it. 
It is still a bad written chinese PPC code conflicting with some applications but it works in the meantime. 
 While the whole planet slides down on the windoze-skit  - I'm waiting for a real Mac driver too ;o)

Mar 04, 2009 | UC-Logic WP8060U (689076313025)

1 Answer

My Wacom Intuos3 tablet won't switch into pen mode


The winning answer came courtesy of Mr Benedikt Schmitt of Wacom Europe, who offered the following solution: from the Windows Device Manager, disable the “Wacom Virtual Hid Driver” device. (Go to Control Panel > System and Maintenance > Device Manager, find the driver, right-click it and choose “Disable”.) One reboot later (welcome to Windows-land, circa 2008?), everything works as desired. Pressure and tilt sensitivity inside Photoshop still work, and the pen functions just fine in the rest of the Windows desktop. The absolute mapping makes it an absolute pleasure to point quickly and precisely. It makes my laser mouse feel rather clumsy navigating a large 24′ screen!

Feb 04, 2009 | Wacom Intuos3 Graphic Tablet

2 Answers

My Wacom Intuos3 tablet won't switch into pen mode


I had the same problem with my Intuos3 on Vista. Tech support suggested the following.

Do this.....Go to Start--->control panel---->system(in classic view)---->device manager--->click on "human interface devices"--->then click on "Wacom virtual HID driver" and right click on that and disable it. Your computer will ask you to restart and you will want to do that.

Everything works fine now.

Jun 23, 2008 | Wacom intuos2 12x18 USB Tablet (507074)

3 Answers

DigiPro drawing table error


NEW DRIVER;


Graphics tablets
Device driver for
2000/XP/XP64/Vista
Driver 5.01.1
(NEW)
2009.03.05 3.21MB
winzip.gif



BIGYUKIE

Oct 23, 2007 | Manhattan Graphics 8 x 6 (174459)

1 Answer

StarBoard Fx-77 Pen does not write on the boards surface


i dont know why i bother looking on here, ive looked for a number of solutions for different problems and there is never any answers on here

Oct 18, 2007 | Hitachi StarBoard FX-77

Not finding what you are looking for?
Graphics Tablets Logo

Related Topics:

763 people viewed this question

Ask a Question

Usually answered in minutes!

Top ACE Graphics Tablets Experts

Gareth Cockram
Gareth Cockram

Level 3 Expert

657 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18299 Answers

Shahzad  Waseem...
Shahzad Waseem...

Level 3 Expert

746 Answers

Are you an ACE Graphics Tablet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...