Question about Blueant Z9i Bluetooth Headset

2 Answers

Blueant z9i headset cannot locate push server

Trying to use blueant z9i with blackberry curver 8310. Device is paired but voice dialing does not work yet. After trying to find the address book, I get "cannot locate Push Server" and to check my instructions...what is wrong?

Posted by on

  • Anonymous Feb 02, 2009

    I am having the same problem with my blackberry curve. my husband has a nextel with the same blueant and he had no problems at all with his. i am getting really frustrated!!!!!!!

×

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

    Governor:

    An expert whose answer got voted for 20 times.

  • Expert
  • 38 Answers

Often this is an issue with the phone pairing as a "handsfree" rather than as a "headset". Try resetting the Z9i (push Vol Up, Vol Down and Blueant buttons at same time), then re-pairing ensuring you chose "headset" mode on the Curve.

Posted on Mar 26, 2009

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Nope, didn't work and BlueAnt support it horrible. I've submitted to them twice and NOTHING

Posted on Sep 22, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I put this bluetooth (ant Z9i)into pairing mode? please be detailed as possible...


Pairing Procedure (This is an example only and may differ from your phone, but the process will be the same.)
1. First turn the phone OFF and then back ON again to refresh its memory.
2. Bring the mobile phone to about 30cm from the Z9i Dual Microphone.
3. Find the Bluetooth menu in your mobile phone. Turn Bluetooth ON. (Check your mobile phone user guide if necessary)
4. With the Z9i OFF, Press and Hold the MFB for about 6 seconds. The LED will appear a solid Blue, and then will start fl ashing. The
Z9i is now in Pairing mode and ready to be found in searches by other Bluetooth devices. Pairing mode will be active for 2 minutes.
5. Perform a Bluetooth device discovery on your mobile phone to add a new device. (It takes a few seconds to search for
and fi nd other Bluetooth devices around you).
6. When Bluetooth devices are found, the phone will display “BlueAnt Z9i”. Scroll to it and press OK to confi rm that you
want to Pair with it.
7. Enter Passkey “0000” when your phone prompts you. The phone and Z9i will now Pair.
8. An additional security setting in your phone may be needed to allow the headset and phone to connect automatically
without confi rmation each time you connect your Z9i. Generally in the options for the BlueAnt Z9i, it will be referred to as
“set as authorized”, “add to trusted devices”, ‘’allow connection’’ or similar.
9. If required for fi rst time connection, select the BlueAnt Z9i to connect with your phone. OR, Click the MFB on the Z9i,
to connect with the phone.

You can get the manual on link below. page 9 tells you how to pair.

http://myblueant.com/downloads/manuals/Z9i_manual.pdf


good luck and please rate 4 thumbs for the free answer

Mar 28, 2010 | Blueant Z9i Bluetooth Headset

1 Answer

My blueant Z9i will not connect to my blackberry bold


Go to this page, it will answer any question concerning the blueant .. including pairing to your phone .. activating your blueant etc http://www.blueant.com.au/index.php

Jan 14, 2010 | Blueant Z9 Wireless Headset

1 Answer

Pairing my Z9i v1.1 headset with my new iPhone


I had a problem with this also, try this.

Turn off both devices then turn on your phone.
make sure your bluetooth option is "ON" on your phone
turn on the blueant z9i
press and hold both volume buttons, while doing that, press the ANT button.
Your blueant should be flashing fast right now and your iphone should be able to find it.
complete the pairing by selecting the blueant headset on your iphone and enter the code "0000"
enjoy

Jan 06, 2010 | Blueant Z9i Bluetooth Headset

1 Answer

Blueant Z9i Volume control problem


To isolate the source of the issue, test the device on another model of phone. If the issue carries across you know its the unit, if not it could be the default call volume of the phone.

Rylan

Sep 26, 2009 | Blueant Z9i Bluetooth Headset

1 Answer

Blackberry Curve 8310 won't pair!


Go to this page, it will answer any question concerning the blueant .. including pairing to your phone .. activating your blueant etc http://www.blueant.com.au/index.phpalso gives you step by step instructions on codes, pairing etc

Jul 26, 2009 | Blueant Z9i Bluetooth Headset

1 Answer

What is the passkey for the BlueAnt Z9i?


The passcode for your Blueant Z9i should be 0000.

Jul 03, 2009 | Blueant Z9i Bluetooth Headset

1 Answer

My BlueAnt won't go into pairing mode anymore!


Have you tried resetting the Blueant Z9i? You push the Volume Up, Volume Down and Blueant buttons all at the same time (with the device on). This will eliminate all paired phones, then re-pair with just your phone (hold down Blueant button for 6 seconds or so to enter pairing mode).

May 07, 2009 | Blueant Z9i Bluetooth Headset

1 Answer

Z9i Connecting problem.


Have you tried resetting the Blueant Z9i? You push the Volume Up, Volume Down and Blueant buttons all at the same time (with the device on). This will eliminate all paired phones, then re-pair with just your phone (hold down Blueant button for 6 seconds or so to enter pairing mode).

Feb 24, 2009 | Blueant Z9i Bluetooth Headset

Not finding what you are looking for?
Blueant Z9i Bluetooth Headset Logo

Related Topics:

392 people viewed this question

Ask a Question

Usually answered in minutes!

Top Blueant Headsets Experts

Iron
Iron

Level 3 Expert

3018 Answers

Josh Whitehead
Josh Whitehead

Level 3 Expert

1146 Answers

aliasger yq

Level 2 Expert

213 Answers

Are you a Blueant Headset Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...