Good evening, my printer is coming up with Error 0xc18a0206. Please can you help me. Thank you.

no tengo idea de que estas hablando pero quisiera saber si puedes resolver el codigo 0xc18a0206 en una photosmart?

Hello and Welcome!

The error 0xc18a0206 is mostly occurred in HP printers
To solve the error code 0xc18a0206, Follow the given steps

• Reset the printer without turning off the printer, disconnect the USB cable from the rear of the printer
• Remove the cartridges from the printer
• Wait for the 'Insert Cartridges' message to display on the control panel
• Disconnect the power from the back of the printer
• Now wait 60 seconds
• Now reconnect the power If the product does not automatically turn on, press the Power button
• Reinsert the cartridges, and then close any open doors on the printer.
• If you receive a prompt to print a calibration page.Print it
• Reconnect the USB cable to the port of the printer & then try printing again
  

Error will automatically remove.
But if u face still this error then printer service required. In that condition best option is to Contact HP Service Provider

I hope this solution helps you
Thank you for using FixYa

Issue An 0xc18xxxxx or 0xc19xxxxx ink system error code displays on the front panel. The printer cannot copy, receive faxes, or print. Solution

1. Press the On button to turn the printer off.
2. Unplug the power cord from the back of the printer.
3. Remove all the ink cartridges.
4. Wait two minutes.
5. Plug the power cord into the back of the printer.
6. Press the On button to turn the printer on.
7. Install the ink cartridges when prompted.

If the error code does not display, the issue is resolved. If the 0xc18xxxxx or 0xc19xxxxx ink system error code displays on the front panel, service the printer.

the exact meaning of this error code is problem in the main board of the printer.but if the main board is just got hanged due to some printer settings then manyatimes this above mentioned reset procedure helps.but if this do not helps then its time to replace the main board Hi there I It worth a try nothing to lose and it may work. Error code: 0xc18a0201, 0xc18a0206, 0xc18a0306, 0xc18a030a, 0xd0620130, 0x887dd03a, 0xd05d010d, 0xf0af8004, 0xc19ac3ff, 0xc18a050...

Reset the product:
1.Without turning off the product, disconnect the USB cable from the rear of the product.
2.Remove the cartridges from the product.
3.Wait for the 'Insert Cartridges ' message to display on the control panel.
4.Disconnect the power cord from the back of the product.
5.Wait 60 seconds.
6.Reconnect the power cord. If the product does not automatically turn on, press the Power button ( ).
7.Reinsert the cartridges, and then close any open doors on the product.
8.If you receive a prompt to print a calibration page, do so.
9.Reconnect the USB cable to the rear of the product, and then try printing again.
Please come back and just gave a vote, it will gave me some satisfaction to know am helping some one so I will keep on helping. This will help. Thanks please keep updated. please do rate the solution positively .thank you for using fixya

Hi there you can try this may work,

Your error 0xc18a0206
Solution one: Reset the product
1. Without turning off the product, disconnect the USB cable from the rear of the product.
1. Remove the cartridges from the product.
2. Wait for the 'Insert Cartridges ' message to display on the control panel.
3. Disconnect the power cord from the back of the product.
4. Wait 60 seconds.
5. Reconnect the power cord. If the product does not automatically turn on, press the Power button ( ).
6. Reinsert the cartridges, and then close any open doors on the product.
7. If you receive a prompt to print a calibration page, do so.
8. Reconnect the USB cable to the rear of the product, and then try printing again.
9. If you have completed all the steps listed above and are still experiencing a problem, you need to service the product.
Please come back and just gave a vote, it will gave me some satisfaction to know am helping some one so I will keep on helping.
All The Best: Pineworks

Hi It worth a try nothing to lose and it may work. Error code: 0xc18a0201, 0xc18a0206, 0xc18a0306, 0xc18a030a, 0xd0620130, 0x887dd03a, 0xd05d010d, 0xf0af8004, 0xc19ac3ff, 0xc18a050...

Reset the product:
1. Without turning off the product, disconnect the USB cable from the rear of the product.
2. Remove the cartridges from the product.
3. Wait for the 'Insert Cartridges ' message to display on the control panel.
4. Disconnect the power cord from the back of the product.
5. Wait 60 seconds.
6. Reconnect the power cord. If the product does not automatically turn on, press the Power button ( ).
7. Reinsert the cartridges, and then close any open doors on the product.
8. If you receive a prompt to print a calibration page, do so.
9. Reconnect the USB cable to the rear of the product, and then try printing again.
Please come back and just gave a vote, it will gave me some satisfaction to know am helping some one so I will keep on helping.
All The Best: Pineworks

Peggy,

This is an ink cartridge problem.

Are you using a factory new ink cartridge?
Please consider the following:
If you are using a refilled or third party cartridge that may well be your problem. Most manufacturers build logic into their products to prevent the use of “Other Equipment Manufactured” cartridges as well as re-filled cartridges.
They do this to prevent problems from contaminated inks causing problems with print quality or damaging the physical printhead.
If you are using factory new cartridges, then please call the manufacturers Technical Support for assistance with the warranty on the cartridges
Don

Try holding down the OK, Cancel, Black, and Color buttons all at once. While holding them down, press the On button to power it off (You may need another person if you lack large, coordinated hands). Turn it back on while still holding the other buttons down. You will notice it turn itself off before "booting" fully. After it turns itself off, you can finally let go of those buttons and turn it back on normally. This will force a reset and system maintenance. Worked for me and others.

did you removed plastic tape from ink cartridge before you install?

0xc18a0206
C7183 ALL IN ONE