Question about Hitachi C10FCE2 10" Compound Miter Saw

1 Answer

Need a detailed schematic for handle of a hitachi C10FC mitre saw

I have a Hitachi C10FC compound mitre saw and had to change a part in the trigger handle, however i did not take notice of the way it came apart. I need a detailed schematic of the handle to ensure it goes back together properly. Any help would be appreciated

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 2,176 Answers

I would go to Ereplacementparts.com and type in your exact model number (there are about 5 saws) and they you can download a schematic of your tool. Hope this helps.

Posted on Dec 30, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do i replace switch on Hitachi miter saw


Oh come on.
You know the answer.
You start taking out screws until you can see the switch and then you replace it with a new one from the parts supply store.
Then you put all the screws back in.

Oct 16, 2014 | Hitachi C10FCE2 10" Compound Miter Saw

1 Answer

HOW DO I TILT SAW TO MITRE?


Hi, there should be a leaver or knurrld nut or handle at the back of
your saw loosen this and you should be able to tilt the saw over to the
left (normaly) under neath facing you , you should see a curved
angle guage and arrow marker 90--45 ...T.C.

Mar 20, 2013 | Hitachi C10FCE2 10" Compound Miter Saw

1 Answer

Cant pull out locking pin on miter saw


There is a heavy spring which is trying to hold up the saw that is working against you. Press down on the handle of the saw so that it moves down a little, now you should be able to pull out the pin.
Good luck.

Jun 13, 2012 | Hitachi C10FCE2 10" Compound Miter Saw

1 Answer

I have just gotten my Hitachi 10'' compound mitre saw (C10FCE2) out of the box, and have disengaged the packing pin, and put on the stabilizion bar and handle. I can not seem to get the blade to tilt back...


the hndle at the front is for your mitre. there should be one at rear of tool to bevel (COMPOUND) IT SHOULD HAVE A HANDLE AS WELL possibly left hand thread !

Jan 04, 2010 | Hitachi C10FCE2 10" Compound Miter Saw

1 Answer

Am replacing table insert (part 311-046) on Hitachi model C10FC. Appears new part does not have slot for saw blade to pass thru. Do I just use saw to create a slot before using saw for projects, or is...


Most manufacturers do not cut a slot in the inserts for miter saws. Just use your saw as normal and cut the slot as you cut through a piece of wood. It is adviseable not to use a brand new blade. The plastic could gum up your blade and cause it to dull quicker.

Oct 26, 2009 | Table Saws

1 Answer

Saw runs continuously


The on off switch has a contact that has probably fused together from making and breaking causing an arc. You may try giving it a good 'wrap' with the back of a screw driver to free it, or replace the switch.

Jul 15, 2009 | Hitachi C10FCE2 10" Compound Miter Saw

1 Answer

I have a makita mitre saw and need to adjust the angle to 45 degrees. I unlock it and try to turn it but it won't turn. Any ideas?


you have to turn the handle, it works like a bolt, you cant see it but it is tied in, you have to unscrew it before trying to move it

Dec 13, 2008 | Makita 10" Dual Bevel Sliding Compound...

Not finding what you are looking for?
Hitachi C10FCE2 10" Compound Miter Saw Logo

Related Topics:

871 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hitachi Table Saws Experts

JOHN LAPIER

Level 3 Expert

2384 Answers

Michael R. Turner

Level 1 Expert

18 Answers

Mike Cairns
Mike Cairns

Level 3 Expert

3053 Answers

Are you a Hitachi Table Saw Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...