I have two H700s, one paired just fine with my cell phone. The other one will not pair. The light will turn violet for just a few seconds and then shut off. I can not get it to stay in pair mode. The headset is fully charged, and it is a real Motorola headset as well.
It's important to note that the pin has to be entered while the light is still violet. On the phone, begin searching for bluetooth devices. With the boom closed, hold the center button until the light turns violet, then immediately flip the boom open. The phone should immediately find your H700. However, to pair successfully, you must enter the pin (0000) while the light is still violet. If the light goes off, close the boom, enter 0000, and while the phone says processing, hold the center button until the light turns violet and flip the boom open. The light on your H700 will turn blue, then flash rapidly, and your phone should say that it has paired successfully.
I could never get the purple light to come on ... finally discovered that to get the purple light, you have to first press the multi-function (center) button and hold it in until the light turns purple. As soon as you see the purple light, immediately open the boom (mouthpiece) and voila! You're finally now in pairing mode.
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones). click here to download the app (for users in the US for now) and get all the help you need. Good luck!
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
You will need to enter pairing mode on your device. The H700 User Manual indicates that you do so by first turning off any previously paired device and opening the headset BOOM. The indicator light should light a steady purple while in pairing mode.
You may not need to turn off your phone if you do not desire this, you may be able to get by turning the blue tooth function off and on, on your phone and attempt to pair again.
After your phone has found the H700 you have to tell your phone to pair with it. It will then ask for the code. Punch in 0000 and confirm. After a little bit the H700 will flash blue several times rapidly and then start blinking about every 5 or 6 seconds. It is then paired with your phone.
The same way you did to your Razr. Make sure the H700s microphone are is in the off position. Push in and hold the button on the H700 until the light lights up purple. Release the button and quickly open the microphone button. The light will stay purple and you are now in "Pairing Mode". Now follow the instructions for your phone to pair with a BlueTooth unit. When it asks for a code, use 0000 (that is 4 zeros).
Steps to pair a H700 headset with any bleutooth pone:
Make sure the H700 fully chared (very important)!!
Make sure the microphone boom is folded closed, i.e. power is off!
Hold the call button for 1-5 seconds until the light is steady lit purple
Flip out the microphone boom, the light should stay lit purple!
Now you are ready to pair the headset with your phone, so follow the pairing instructions of your phone.
Note: When prompted for the Passkey; it is most likely 0000 but the correct Passkey should be on the headset accessory instructions.
I must add that indeed my headset on occation (once or twice every three months) also loses its connection with the blackberry (a 8703e) . At which time I have to remove the headset from my phone bluetooth device list, and start the above described steps to pair my headset with the phone again.
In order to pair with this device you must follow these steps:
1. Close the mike on the H700
2. Hold the center call button on the H700 until the ring in the center turns violet.
3. Open the mike on the H700
4. Have your phone search for bluetooth devices
and follow the propmts
5. If your phone requests a passkey, enter 0000 This is the default for all Motorola devices
Hope this helps.
First: When charging the light should be steady. If the battery is less than 20% charged it should be red. More than 20% it will be yellow. Fully charged it should be green. Make sure your microphone is closed when charging.
Second: Have you "Paired" the H700 and the phone? If not you need to. To put the H700 into "Pairing Mode" do this:
Make sure the H700s microphone are is in the off position. Push in and
hold the button on the H700 until the light lights up purple. Release
the button and quickly open the microphone button. The light will stay
purple and you are now in "Pairing Mode". Now follow the instructions
for your phone to pair with a BlueTooth unit. When it asks for a code,
use 0000 (that is 4 zeros).