- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Accessing the System Control Center To open the System Control Center on a web browser installed on a computer that is connected to the satellite modem, double-click the System Control Center shortcut on your computer desktop, or follow these steps: 1. Open a web browser such as Internet Explorer or Netscape. 2. In the browser address bar, type www.systemcontrolcenter.com or 192.168.0.1 and press Enter. Note: To use 192.168.0.1, the satellite modem must be configured for a private address, and DHCP must be enabled on the computer. The System Control Center home page appears as shown in Figure 8: System Control Center home page on page 9. If you are unable to access the System Control Center, refer to Cannot Access the System Control Center on page 34. Creating a shortcut to the System Control Center You can create a Windows shortcut on your computer desktop for easy access to the System Control Center home page. Note: As part of the installation process, the person who installed your satellite modem creates a shortcut to the System Control Center, so there should already be a shortcut on your desktop—unless it has been deleted. 1. Open a web browser. Note: The method described here works for Internet Explorer and Netscape Navigator. It may work with other browsers. 2. Type www.systemcontrolcenter.com or 192.168.0.1 in the browser address bar and press Enter. Note: To use 192.168.0.1, the satellite modem must be configured for a private IP address, and DHCP must be enabled on the computer. The System Control Center home page appears. 3. Drag the icon that appears in front of the address displayed in the browser to the computer desktop.
The error message refer to system files it cannot load dur to either corrupted or missing files.
You can try to do a repair with your Windows CD install disk and if this does not work you will need to reinstall Windows again together with any drivers that Windows didn't install and your programs.
Note you will lose you data in this process, hoped you backed up your files.
I am having the same problem with my PS2, but I have an HDD inside of mine. I am told this is a circuit problem inside the PS2 that doesn't allow the information to be transfered to the RAM.That's why you see “No Data” instead of the usual problem of “Disc Read Error”.I hate to say it, but it sounds like you are going to have to do the same thing I am about to do.Send it in to Sony and get it repaired.
I am also pretty sure this PS2 you are talking about is the large fat one, and not the slim one.
Please follow the instructions below. Step 1: Start the System Configuration Utility
Click Start menu, click Run, type msconfig, and then click OK.
The System Configuration Utility dialog box appears. Step 2: Configure selective startup options 1. In the System Configuration Utility dialog box, click the General tab, and then click Selective Startup. 2. Click to clear the Load Startup Items check box. 3 When you are prompted, click Restart to restart the computer. After restarting system.
1. Log on to Windows. 2. When you receive the following message, click to select the Don't show this message or launch the System Configuration Utility when Windows start check box, and then click OK:
Note: Doing this startup programmes will not run in the background however you can start the programmes later from start all programmes.
Please feel free to get back to me If you need any further assistance.
Sounds like you dont have browser access. Picture messaging uses the data service from your mobile internet. If you are using an unlocked phone these settings will need to be configured for your browser and your picture messaging. Contact your carrier or the manufacturers website for these.